All MIBs › ENTERASYS-IP-SLA-MIB › etsysIpSlaScheduleRecurrence
etsysIpSlaScheduleRecurrence
Module: ENTERASYS-IP-SLA-MIB
OID (symbolic): ENTERASYS-IP-SLA-MIB::etsysIpSlaScheduleRecurrence
OID (numeric): 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This value represents the time between multiple test cycles. This value is the length of time between the end of one test cycle and the start of the next test cycle.
A new test cycle SHALL NOT begin while a current cycle is running. Thus, this value SHOULD be greater than the result of the number repetitions multiplied by the sum of the duration and the frequency. If the value is less than the run time of a test cycle, the overlapping test cycles are skipped.
For example, if there are two repetitions with a duration of 60 seconds and a frequency of 30 seconds, the test cycle runs for 180 seconds.
Notes: Maximum value is 90 days; a value of 86400 is one day.
A value of zero indicates this scheduled entry will not repeat its test cycle.
What is etsysIpSlaScheduleRecurrence?
This read-write Unsigned32 (0, or 120-7,776,000 seconds, up to 90 days) sets the gap between the end of one test cycle and the start of the next; a value of zero means the test runs once and doesn't repeat. Keep it comfortably larger than repetitions times (duration+frequency) — e.g. 2 reps of 60s duration and 30s frequency need a full 180-second cycle — or overlapping cycles get skipped.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.2 snmpwalk -v2c -c public <target> ENTERASYS-IP-SLA-MIB::etsysIpSlaScheduleRecurrence
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.2.1 snmpget -v2c -c public <target> ENTERASYS-IP-SLA-MIB::etsysIpSlaScheduleRecurrence.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.2.1 i <value>
Start monitoring Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (IP SLA active probing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-IP-SLA-MIB::etsysIpSlaScheduleRecurrence OID value, configure state conditions and alerts, and monitor any Enterasys Networks router/Layer 3 switch (legacy, later Extreme Networks) (IP SLA active probing) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.94 | etsysIpSlaMIB | ENTERASYS-IP-SLA-MIB |
| 1.3.6.1.4.1.5624.1.2.94.1 | etsysIpSla | ENTERASYS-IP-SLA-MIB |
| 1.3.6.1.4.1.5624.1.2.94.1.2 | etsysIpSlaTables | ENTERASYS-IP-SLA-MIB |
| 1.3.6.1.4.1.5624.1.2.94.1.2.2 | etsysIpSlaScheduleTable | ENTERASYS-IP-SLA-MIB |
| 1.3.6.1.4.1.5624.1.2.94.1.2.2.1 | etsysIpSlaScheduleEntry | ENTERASYS-IP-SLA-MIB |
| 1.3.6.1.4.1.5624.1.2.94.1.2.2.1.2 | etsysIpSlaScheduleRecurrence | ENTERASYS-IP-SLA-MIB |