All MIBs › ENTERASYS-DOT3-LLDP-EXT-MIB › etsysDot3LldpExtEeeTLVTxEnable
etsysDot3LldpExtEeeTLVTxEnable
Module: ENTERASYS-DOT3-LLDP-EXT-MIB
OID (symbolic): ENTERASYS-DOT3-LLDP-EXT-MIB::etsysDot3LldpExtEeeTLVTxEnable
OID (numeric): 1.3.6.1.4.1.5624.1.2.104.1.2.1.1.3
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: The Energy Efficient Ethernet LLDP TLV transmission status.
What is etsysDot3LldpExtEeeTLVTxEnable?
This setting controls whether the switch advertises its EEE capabilities and settings to the connected link partner via LLDP (Link Layer Discovery Protocol) type-length-value messages on this interface. Administrators enable this so that EEE-aware devices on both ends of a link can negotiate and coordinate their low-power idle timers correctly through LLDP rather than relying solely on local configuration. For example, turning this on for a port connecting to an EEE-capable server ensures the switch and server exchange the LLDP information needed to properly synchronize their energy-saving behavior.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.104.1.2.1.1.3 snmpwalk -v2c -c public <target> ENTERASYS-DOT3-LLDP-EXT-MIB::etsysDot3LldpExtEeeTLVTxEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.104.1.2.1.1.3.1 snmpget -v2c -c public <target> ENTERASYS-DOT3-LLDP-EXT-MIB::etsysDot3LldpExtEeeTLVTxEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.104.1.2.1.1.3.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (LLDP Energy Efficient Ethernet extensions) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-DOT3-LLDP-EXT-MIB::etsysDot3LldpExtEeeTLVTxEnable OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (LLDP Energy Efficient Ethernet extensions) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.104 | etsysDot3LldpExtMIB | ENTERASYS-DOT3-LLDP-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.104.1 | etsysDot3LldpExtObjects | ENTERASYS-DOT3-LLDP-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.104.1.2 | etsysDot3LldpExtEeePort | ENTERASYS-DOT3-LLDP-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.104.1.2.1 | etsysDot3LldpExtEeeConfigTable | ENTERASYS-DOT3-LLDP-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.104.1.2.1.1 | etsysDot3LldpExtEeeConfigEntry | ENTERASYS-DOT3-LLDP-EXT-MIB |
| 1.3.6.1.4.1.5624.1.2.104.1.2.1.1.3 | etsysDot3LldpExtEeeTLVTxEnable | ENTERASYS-DOT3-LLDP-EXT-MIB |