All MIBs › ENTERASYS-CONVERGENCE-END-POINT-MIB › etsysConvEndPointGlobalDefaultPolicyIndex
etsysConvEndPointGlobalDefaultPolicyIndex
Module: ENTERASYS-CONVERGENCE-END-POINT-MIB
OID (symbolic): ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysConvEndPointGlobalDefaultPolicyIndex
OID (numeric): 1.3.6.1.4.1.5624.1.2.40.1.1.2.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The policy that should be applied for this type of Convergence End Point. This value is an etsysPolicyProfileIndex as defined in the ENTERASYS-POLICY-PROFILE-MIB. If no such policy index exists, then no policy will be applied when this type of Convergence End Point is detected or discovered. The value zero is not a valid etsysPolicyProfileIndex, so zero indicates that no policy should be applied.
Maintaining the value of this object across system reboots is REQUIRED.
What is etsysConvEndPointGlobalDefaultPolicyIndex?
Default policy profile index (an etsysPolicyProfileIndex from the ENTERASYS-POLICY-PROFILE-MIB) applied automatically whenever a Convergence End Point of the associated type is discovered; a value of 0 means no policy is applied. Set this per endpoint type so, for example, discovered VoIP phones automatically get a voice QoS policy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.40.1.1.2.1.2 snmpwalk -v2c -c public <target> ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysConvEndPointGlobalDefaultPolicyIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.40.1.1.2.1.2.1 snmpget -v2c -c public <target> ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysConvEndPointGlobalDefaultPolicyIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.40.1.1.2.1.2.1 i <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Convergence End Point/IP phone detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysConvEndPointGlobalDefaultPolicyIndex OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Convergence End Point/IP phone detection) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.40 | etsysConvergenceEndPointMIB | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1 | etsysConvEndPointObjects | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.1 | etsysConvEndPointConfig | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.1.2 | etsysConvEndPointGlobalConfigTable | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.1.2.1 | etsysConvEndPointGlobalConfigEntry | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.1.2.1.2 | etsysConvEndPointGlobalDefaultPolicyIndex | ENTERASYS-CONVERGENCE-END-POINT-MIB |