All MIBs › ENTERASYS-CONVERGENCE-END-POINT-MIB › etsysConvEndPointGlobalConfigEnable
etsysConvEndPointGlobalConfigEnable
Module: ENTERASYS-CONVERGENCE-END-POINT-MIB
OID (symbolic): ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysConvEndPointGlobalConfigEnable
OID (numeric): 1.3.6.1.4.1.5624.1.2.40.1.1.1
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: When set to enabled(1) this object activates the current Convergence End Point configuration.
When set to disabled(2) this MIB SHALL be configurable, but MUST NOT be applied, all entries will be removed from the etsysConvEndPointConnMacTable and the etsysConvEndPointConnPortTable, and any policies that have been changed as a result of End Point detection will revert to their default states.
Maintaining the value of this object across agent reboots is REQUIRED.
What is etsysConvEndPointGlobalConfigEnable?
Master switch that activates or deactivates the entire Convergence End Point (CEP) feature on this device; disabling it removes all discovered endpoints from the connection tables and reverts any policies applied by CEP detection back to their defaults. Turn this on before relying on automatic detection of VoIP phones and other convergence devices.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.40.1.1.1 snmpwalk -v2c -c public <target> ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysConvEndPointGlobalConfigEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.40.1.1.1.1 snmpget -v2c -c public <target> ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysConvEndPointGlobalConfigEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.40.1.1.1.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Convergence End Point/IP phone detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysConvEndPointGlobalConfigEnable OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Convergence End Point/IP phone detection) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.40 | etsysConvergenceEndPointMIB | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1 | etsysConvEndPointObjects | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.1 | etsysConvEndPointConfig | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.1.1 | etsysConvEndPointGlobalConfigEnable | ENTERASYS-CONVERGENCE-END-POINT-MIB |