All MIBs › ENTERASYS-CONVERGENCE-END-POINT-MIB › etsysCEPPortClearUsers
etsysCEPPortClearUsers
Module: ENTERASYS-CONVERGENCE-END-POINT-MIB
OID (symbolic): ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysCEPPortClearUsers
OID (numeric): 1.3.6.1.4.1.5624.1.2.40.1.3.3.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Setting this object to a value of true(1) will cause all detected or discovered Convergence End Points to be removed from the following status tables:
etsysConvEndPointConnMacTable etsysConvEndPointConnPortTable etsysCEPConnMacTable
Setting this object to a value of false(2) has no effect. This object will always return a value of false(2).
What is etsysCEPPortClearUsers?
Setting this to true(1) removes all Convergence End Points discovered on this interface from every CEP status table; it always reads back false(2). Use it to force a clean re-discovery of phones on a port after a wiring change or a suspected stale entry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.40.1.3.3.1.1 snmpwalk -v2c -c public <target> ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysCEPPortClearUsers
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.40.1.3.3.1.1.1 snmpget -v2c -c public <target> ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysCEPPortClearUsers.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.40.1.3.3.1.1.1 s <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Convergence End Point/IP phone detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysCEPPortClearUsers OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Convergence End Point/IP phone detection) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.40 | etsysConvergenceEndPointMIB | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1 | etsysConvEndPointObjects | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.3 | etsysConvEndPointDetection | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.3.3 | etsysCEPDetectionPortConfigTable | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.3.3.1 | etsysCEPDetectionPortConfigEntry | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.3.3.1.1 | etsysCEPPortClearUsers | ENTERASYS-CONVERGENCE-END-POINT-MIB |