All MIBs › ENTERASYS-CONVERGENCE-END-POINT-MIB › etsysCEPCiscoCDPVoicePortVlan
etsysCEPCiscoCDPVoicePortVlan
Module: ENTERASYS-CONVERGENCE-END-POINT-MIB
OID (symbolic): ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysCEPCiscoCDPVoicePortVlan
OID (numeric): 1.3.6.1.4.1.5624.1.2.40.1.3.4.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object controls the behavior of the remote configuration of Cisco VOIP phones via Cisco CDP. Setting this object to a value of -1 will cause the device to not attempt to remotely configure a Cisco phone using CDP. Setting this object to a value of 0 will cause the device to configure the phone to send 802.1p priority tagged frames. A value of 4095 will cause the device to configure the phone to send untagged frames. A value in the range 1..4094 will cause the device to configure the phone to send 802.1Q tagged frames using that value as the VLAN ID encoded in the tag. This object SHOULD be maintained across device reboots.
What is etsysCEPCiscoCDPVoicePortVlan?
Controls how this switch remotely configures a Cisco VoIP phone's VLAN tagging via CDP: -1 disables remote configuration, 0 tells the phone to send 802.1p priority-tagged frames, 4095 tells it to send untagged frames, and 1-4094 configures 802.1Q tagging with that VLAN ID. Set this to the voice VLAN ID so Cisco phones auto-configure their tagging without manual setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.40.1.3.4.1.1 snmpwalk -v2c -c public <target> ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysCEPCiscoCDPVoicePortVlan
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5624.1.2.40.1.3.4.1.1.1 snmpget -v2c -c public <target> ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysCEPCiscoCDPVoicePortVlan.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5624.1.2.40.1.3.4.1.1.1 i <value>
Start monitoring Enterasys Networks switch (legacy, later Extreme Networks) (Convergence End Point/IP phone detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ENTERASYS-CONVERGENCE-END-POINT-MIB::etsysCEPCiscoCDPVoicePortVlan OID value, configure state conditions and alerts, and monitor any Enterasys Networks switch (legacy, later Extreme Networks) (Convergence End Point/IP phone detection) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5624 | enterasys | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1 | etsysMibs | ENTERASYS-MIB-NAMES |
| 1.3.6.1.4.1.5624.1.2 | etsysModules | ENTERASYS-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5624.1.2.40 | etsysConvergenceEndPointMIB | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1 | etsysConvEndPointObjects | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.3 | etsysConvEndPointDetection | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.3.4 | etsysCEPCdpPortConfigTable | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.3.4.1 | etsysCEPCdpPortConfigEntry | ENTERASYS-CONVERGENCE-END-POINT-MIB |
| 1.3.6.1.4.1.5624.1.2.40.1.3.4.1.1 | etsysCEPCiscoCDPVoicePortVlan | ENTERASYS-CONVERGENCE-END-POINT-MIB |