EATON-EMP-MIB :: xupsEnvRemoteHumidity

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsEATON-EMP-MIBxupsEnvRemoteHumidity

xupsEnvRemoteHumidity

Module: EATON-EMP-MIB

OID (symbolic): EATON-EMP-MIB::xupsEnvRemoteHumidity

OID (numeric): 1.3.6.1.4.1.534.1.6.6

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: The reading of an EMP's humidity sensor.

What is xupsEnvRemoteHumidity?

This is the current relative humidity percentage reported by the EMP's humidity sensor. Admins watch this alongside the temperature reading to detect conditions in the equipment space monitored by the probe, since both excessive dryness and excessive moisture threaten hardware. A reading of 85 percent approaching xupsEnvRemoteHumidityUpperLimit signals rising moisture in the room, prompting a check of HVAC or dehumidifier equipment before the humidity alarm fires.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.534.1.6.6
snmpwalk -v2c -c public <target> EATON-EMP-MIB::xupsEnvRemoteHumidity

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.534.1.6.6.1
snmpget -v2c -c public <target> EATON-EMP-MIB::xupsEnvRemoteHumidity.1

Start monitoring Eaton UPS/power equipment with Environmental Monitoring Probe (EMP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the EATON-EMP-MIB::xupsEnvRemoteHumidity OID value, configure state conditions and alerts, and monitor any Eaton UPS/power equipment with Environmental Monitoring Probe (EMP) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.534eatonEATON-OIDS
1.3.6.1.4.1.534.1xupsMIBEATON-OIDS
1.3.6.1.4.1.534.1.6xupsEnvironmentEATON-OIDS
Numeric OIDNameModule
1.3.6.1.4.1.534.1.6.6xupsEnvRemoteHumidityEATON-EMP-MIB