Dell-MIR-MIB

All MIBs › Dell-MIR-MIB

Organization: Dell

Last Updated: 2007-01-02

Category: Technology: QoS, Vendor: Dell

Description: Manages Maximum Information Rate (MIR) bandwidth limiting and traffic shaping on Dell switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Dell-MIR-MIB?

Dell-MIR-MIB is a Dell-branded proprietary MIB (built on RADLAN/Marvell embedded switch software, shared across several OEM-rebranded switch lines) configuring MIR (Multiple Image Registration/mirroring resource) instances. It exposes a MIB-version identifier, maximum MIR-instance counts before and after a reset, the current instance count, a per-interface MIR-ID assignment table, and a VLAN-scoped reserved-ports table. As a configuration MIB it lets an administrator confirm how many MIR instances are in use against the switch's maximum and which interfaces are assigned to which MIR ID. It is deployed on Dell-branded managed Ethernet switches built on this shared switch platform. Engineers can download the Dell-MIR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Dell-MIR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell-branded managed Ethernet switches (RADLAN/Marvell-based)

Monitoring Examples

An administrator checks rlMirCurMriNum against rlMirMaxNumOfMRIs on a Dell switch to confirm there's still headroom before provisioning another mirroring instance.

What Can Be Monitored

current vs. maximum MIR instance count
per-interface MIR ID assignment

Imported Objects

From Dell-MIB

rnd	MODULE-IDENTITY

From IF-MIB

InterfaceIndex

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlMir	1.3.6.1.4.1.89.61			This private MIB module defines MIR private MIBs.
INT rlMirCurMriNum	1.3.6.1.4.1.89.61.4	INTEGER	read-write	The number of the MRI of which MIB variables are treated at the same time by the SNMP agent.
INT rlMirCurMriNumOob	1.3.6.1.4.1.89.61.9	INTEGER	read-only	Returns Router Mri Number.
INT rlMirCurMriNumRouter	1.3.6.1.4.1.89.61.8	INTEGER	read-only	Returns Router Mri Number.
rlMirInterfaceEntry	1.3.6.1.4.1.89.61.5.1		not-accessible	An entry of this table specifies the MRID assignement to a L2 interfrace.
NUM rlMirInterfaceIfIndex	1.3.6.1.4.1.89.61.5.1.1	InterfaceIndex	read-write	The L2 interface for which this entry contains information.
INT rlMirInterfaceMrid	1.3.6.1.4.1.89.61.5.1.2	INTEGER	read-write	Multi IP Router Instance Identifier to which the interface is assgned.
rlMirInterfaceTable	1.3.6.1.4.1.89.61.5		not-accessible	A list of the assignment ifinterfaces to IP Router instances.
INT rlMirMaxNumOfMRIs	1.3.6.1.4.1.89.61.3	INTEGER	read-only	The maximun instanses of IP Multi Instance Routers.
INT rlMirMaxNumOfMRIsAfterReset	1.3.6.1.4.1.89.61.2	INTEGER	read-write	The maximun instanses of IP Multi Instance Routers after the following reset.
INT rlMirMibVersion	1.3.6.1.4.1.89.61.1	INTEGER	read-only	MIB's version, the current version is 1.
rlMirVlanBaseLogicalPortsEntry	1.3.6.1.4.1.89.61.7.1		not-accessible	A VLAN based logical point-to-point port.
NUM rlMirVlanBaseLogicalPortsIfIndex	1.3.6.1.4.1.89.61.7.1.1	InterfaceIndex	read-create	IfIndex of VLAN based Logical point-to-point port.
NUM rlMirVlanBaseLogicalPortsReservedIfIndex	1.3.6.1.4.1.89.61.7.1.2	InterfaceIndex	read-create	IfIndex of VLAN based reserved physical port on which the logical port is defined.
ROW rlMirVlanBaseLogicalPortsStatus	1.3.6.1.4.1.89.61.7.1.4	RowStatus	read-create	It is used to add, update and delete an entry
rlMirVlanBaseLogicalPortsTable	1.3.6.1.4.1.89.61.7		not-accessible	A list VLAN based logical ports.
INT rlMirVlanBaseLogicalPortsVlanTag	1.3.6.1.4.1.89.61.7.1.3	INTEGER	read-create	VLAN tag.
rlMirVlanBaseReservedPortsEntry	1.3.6.1.4.1.89.61.6.1		not-accessible	A VLAN based reserved physical port.
NUM rlMirVlanBaseReservedPortsIfIndex	1.3.6.1.4.1.89.61.6.1.1	InterfaceIndex	read-create	IfIndex of VLAN based reserved physical port.
ROW rlMirVlanBaseReservedPortsStatus	1.3.6.1.4.1.89.61.6.1.2	RowStatus	read-create	It is used to delete an entry
rlMirVlanBaseReservedPortsTable	1.3.6.1.4.1.89.61.6		not-accessible	A list VLAN based reserved physical ports.

RFC description

Dell Multi Instance Router MIB for managing virtual routing instances and interface assignments.

Start monitoring Dell-branded managed Ethernet switch, RADLAN/Marvell-based (mirroring resources) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Dell-MIR-MIB

What Is Dell-MIR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description