All MIBs › Dell-BRIDGEMIBOBJECTS-MIB › rldot1dStpVlanEnable
rldot1dStpVlanEnable
Module: Dell-BRIDGEMIBOBJECTS-MIB
OID (symbolic): Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpVlanEnable
OID (numeric): 1.3.6.1.4.1.89.57.2.6.1.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
Specifies whether this vlan is STP enable or disable
What is rldot1dStpVlanEnable?
This object controls whether the Spanning Tree Protocol is enabled or disabled for a specific VLAN on a Dell switch. When enabled, STP prevents bridge loops by blocking redundant paths; when disabled, all paths are active. Network operators toggle this setting to manage loop prevention on a per-VLAN basis and to avoid unnecessary STP overhead on loop-free segments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.57.2.6.1.2 snmpwalk -v2c -c public <target> Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpVlanEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.57.2.6.1.2.1 snmpget -v2c -c public <target> Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpVlanEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.57.2.6.1.2.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.57 | rlpBridgeMIBObjects | Dell-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.89.57.2 | rldot1dStp | Dell-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.89.57.2.6 | rldot1dStpVlanTable | Dell-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.89.57.2.6.1 | rldot1dStpVlanEntry | Dell-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.89.57.2.6.1.2 | rldot1dStpVlanEnable | Dell-BRIDGEMIBOBJECTS-MIB |