All MIBs › Dell-BRIDGEMIBOBJECTS-MIB › rldot1dStpTypeAfterReset
rldot1dStpTypeAfterReset
Module: Dell-BRIDGEMIBOBJECTS-MIB
OID (symbolic): Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpTypeAfterReset
OID (numeric): 1.3.6.1.4.1.89.57.2.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
New mode of spaning tree supported by the device after the next reset.
What is rldot1dStpTypeAfterReset?
This object specifies which Spanning Tree Protocol (STP) variant the device will use after the next system restart, allowing administrators to plan protocol changes without immediate impact. The choices are perDevice (proprietary per-device STP) or mstp (Multiple Spanning Tree Protocol for advanced VLAN management). Network engineers modify this setting when upgrading bridge configurations to support more sophisticated multi-VLAN topologies or when transitioning devices to modern standards-based spanning tree modes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.57.2.9 snmpwalk -v2c -c public <target> Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpTypeAfterReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.57.2.9.1 snmpget -v2c -c public <target> Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpTypeAfterReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.57.2.9.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.57 | rlpBridgeMIBObjects | Dell-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.89.57.2 | rldot1dStp | Dell-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.89.57.2.9 | rldot1dStpTypeAfterReset | Dell-BRIDGEMIBOBJECTS-MIB |