All MIBs › Dell-BRIDGEMIBOBJECTS-MIB › rldot1dStpPortToDefault
rldot1dStpPortToDefault
Module: Dell-BRIDGEMIBOBJECTS-MIB
OID (symbolic): Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpPortToDefault
OID (numeric): 1.3.6.1.4.1.89.57.2.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
To order port/s to revert to default setings .
What is rldot1dStpPortToDefault?
This object is a write-only command that allows an operator to reset one or more switch ports to their factory default settings for Spanning Tree Protocol (STP) configuration. STP prevents loops in bridged networks by selectively disabling redundant links, and ports may accumulate non-default configuration over time. An operator would write to this object to quickly restore ports to a known, default state without having to manually reconfigure each parameter.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.57.2.18 snmpwalk -v2c -c public <target> Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpPortToDefault
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.57.2.18.1 snmpget -v2c -c public <target> Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpPortToDefault.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.57.2.18.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.57 | rlpBridgeMIBObjects | Dell-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.89.57.2 | rldot1dStp | Dell-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.89.57.2.18 | rldot1dStpPortToDefault | Dell-BRIDGEMIBOBJECTS-MIB |