Dell-BRIDGEMIBOBJECTS-MIB :: rldot1dStpPortDampEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDell-BRIDGEMIBOBJECTS-MIBrldot1dStpPortDampEnable

rldot1dStpPortDampEnable

Module: Dell-BRIDGEMIBOBJECTS-MIB

OID (symbolic): Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpPortDampEnable

OID (numeric): 1.3.6.1.4.1.89.57.2.13.1.2

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Specified if dampening is enabled on this port.

What is rldot1dStpPortDampEnable?

This OID enables or disables port dampening, which prevents flapping ports from repeatedly transitioning up and down during spanning-tree topology recalculation. Enabling this stabilizes the network during instability. An operator would enable this on unstable ports to reduce topology change events and improve network stability.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.57.2.13.1.2
snmpwalk -v2c -c public <target> Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpPortDampEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.89.57.2.13.1.2.1
snmpget -v2c -c public <target> Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpPortDampEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.89.57.2.13.1.2.1 s <value>

Start monitoring Dell PowerConnect/Networking managed switch (per-VLAN spanning tree/port priority) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpPortDampEnable OID value, configure state conditions and alerts, and monitor any Dell PowerConnect/Networking managed switch (per-VLAN spanning tree/port priority) from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.89rndDell-MIB
Numeric OIDNameModule
1.3.6.1.4.1.89.57rlpBridgeMIBObjectsDell-BRIDGEMIBOBJECTS-MIB
1.3.6.1.4.1.89.57.2rldot1dStpDell-BRIDGEMIBOBJECTS-MIB
1.3.6.1.4.1.89.57.2.13rldot1dStpPortTableDell-BRIDGEMIBOBJECTS-MIB
1.3.6.1.4.1.89.57.2.13.1rldot1dStpPortEntryDell-BRIDGEMIBOBJECTS-MIB
1.3.6.1.4.1.89.57.2.13.1.2rldot1dStpPortDampEnableDell-BRIDGEMIBOBJECTS-MIB