All MIBs › Dell-BRIDGEMIBOBJECTS-MIB › rldot1dStpMonitorTime
rldot1dStpMonitorTime
Module: Dell-BRIDGEMIBOBJECTS-MIB
OID (symbolic): Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpMonitorTime
OID (numeric): 1.3.6.1.4.1.89.57.2.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Factor of hello-time during which a port is monotored to determine if it is stable.
What is rldot1dStpMonitorTime?
This configurable multiplier (range 1-20, default 10) determines how many hello intervals a port must remain stable before the Spanning Tree Protocol considers it reliably converged. It helps filter out transient port state changes. An operator would increase this value if the network experiences rapid flapping ports or decrease it for faster convergence in stable environments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.89.57.2.10 snmpwalk -v2c -c public <target> Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpMonitorTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.89.57.2.10.1 snmpget -v2c -c public <target> Dell-BRIDGEMIBOBJECTS-MIB::rldot1dStpMonitorTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.89.57.2.10.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.89 | rnd | Dell-MIB |
| 1.3.6.1.4.1.89.57 | rlpBridgeMIBObjects | Dell-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.89.57.2 | rldot1dStp | Dell-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.89.57.2.10 | rldot1dStpMonitorTime | Dell-BRIDGEMIBOBJECTS-MIB |