All MIBs › DSG-IF-STD-MIB › dsgIfStdTunnelFilterClientIdValue
dsgIfStdTunnelFilterClientIdValue
Module: DSG-IF-STD-MIB
OID (symbolic): DSG-IF-STD-MIB::dsgIfStdTunnelFilterClientIdValue
OID (numeric): 1.3.6.1.4.1.4491.2.1.4.1.2.1.1.16
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The Client Identification Value. The content depends on the value of the dsgIfStdTunnelFilterClientIdType.
For dsgIfStdTunnelFilterClientIdType of type cableCard(0), this object will return a zero length string. For dsgIfStdTunnelFilterClientIdType of a type broadcast(1), this object will have a 16-bit value whether or not it is a length 0 or length 2 broadcast ID. If the value is 0, then the encoded TLV in the DCD would be the original, zero length, broadcast ID. If the value is specified in Table 5-2, then the TLV in the DCD would be a length 2 broadcast ID followed by the value.
For dsgIfStdTunnelFilterClientIdType of type macAddress(2), this object will return a well known MAC address.
For dsgIfStdTunnelFilterClientIdType of type caSystemId(3), this object will return a CA System ID.
For dsgIfStdTunnelFilterClientIdType of type applicationId(4), this object will return an application ID.
Client IDs representing types broadcast(1), caSystemId(3) or applicationId(4) are encoded in DCD messages as Unsigned integers and configured in this object as 6 octet string with the 2 LSB for the client ID value, e.g., an applicationId 2048 (0x0800) is encoded as '000000000800'h.
What is dsgIfStdTunnelFilterClientIdValue?
Holds the actual client identifier whose content depends on dsgIfStdTunnelFilterClientIdType -- e.g. a well-known MAC address for macAddress(2), or an encoded application ID like 0x0800 for applicationId(4).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.4.1.2.1.1.16 snmpwalk -v2c -c public <target> DSG-IF-STD-MIB::dsgIfStdTunnelFilterClientIdValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4491.2.1.4.1.2.1.1.16.1 snmpget -v2c -c public <target> DSG-IF-STD-MIB::dsgIfStdTunnelFilterClientIdValue.1
Start monitoring CMTS/DOCSIS cable modem-gateway (Set-top Gateway tunnel, vendor-neutral CableLabs standard) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DSG-IF-STD-MIB::dsgIfStdTunnelFilterClientIdValue OID value, configure state conditions and alerts, and monitor any CMTS/DOCSIS cable modem-gateway (Set-top Gateway tunnel, vendor-neutral CableLabs standard) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4491 | cableLabs | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2 | clabProject | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1 | clabProjDocsis | CLAB-DEF-MIB |
| 1.3.6.1.4.1.4491.2.1.4 | dsgIfStdMib | CLAB-DEF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4491.2.1.4.1 | dsgIfStdMibObjects | DSG-IF-STD-MIB |
| 1.3.6.1.4.1.4491.2.1.4.1.2 | dsgIfStdTunnelFilter | DSG-IF-STD-MIB |
| 1.3.6.1.4.1.4491.2.1.4.1.2.1 | dsgIfStdTunnelFilterTable | DSG-IF-STD-MIB |
| 1.3.6.1.4.1.4491.2.1.4.1.2.1.1 | dsgIfStdTunnelFilterEntry | DSG-IF-STD-MIB |
| 1.3.6.1.4.1.4491.2.1.4.1.2.1.1.16 | dsgIfStdTunnelFilterClientIdValue | DSG-IF-STD-MIB |