DNS110004-MIB

All MIBs › DNS110004-MIB

Category: Domain: Storage, Vendor: D-Link

Description: Provides device-specific management objects for D-Link DNS-110004 series NAS devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DNS110004-MIB?

DNS110004-MIB is a vendor-specific MIB from D-Link (alphanetworks) for the DNS-110004 series network-attached storage (NAS) device, sitting under the productID/projectID/modelID hierarchy of D-Link's enterprise OID tree. It exposes a broad set of NAS management tables: sysTable (system name, firmware version, network type, fan speed, temperature, and enabled services like CIFS/FTP/NFS/DFS/AFP), diskTable (indexed by diskNum, reporting diskName, diskModel, diskTemperature, diskCapacity, and diskStatus for each physical drive), volumeTable and snapShotTable for storage-volume and snapshot management, plus protocol-specific tables for DFS, NFS, iSCSI targets/LUNs/ACLs (iSCSITargetTable, iSCSILUNTable, iSCSIACLTable), UPS status (uPSTable), and even Amazon S3 backup configuration (aMAZONS3Table), along with a notifyEvts subtree for event notifications. This gives administrators a single SNMP surface for both hardware health (disk temperature/status, fan speed, UPS state) and storage-service configuration on a consumer/SMB-grade NAS appliance. It has no dependency beyond base SNMPv2-SMI/SNMPv2-TC imports as a self-contained enterprise MIB. It is deployed on D-Link DNS-110004 series NAS units, and administrators can download the DNS110004-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DNS110004-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DNS-110004 series NAS

Monitoring Examples

An operator polls diskTable to check diskTemperature and diskStatus for each diskNum, alongside sysTable's sysFanSpeed and sysTemperature; a disk reporting elevated diskTemperature with diskStatus still showing Online, combined with a falling sysFanSpeed, would flag a cooling problem risking drive failure before a RAID rebuild becomes necessary.

What Can Be Monitored

system identity, firmware, fan speed, and chassis temperature
per-disk model, temperature, capacity, and status
storage volume and snapshot configuration
iSCSI target/LUN/ACL configuration
UPS status
event/notification table

Imported Objects

From SNMPv2-SMI

Integer32
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR aMAZONS3BackupNow	1.3.6.1.4.1.171.50.1.3.1.1.15.1.6	DisplayString	read-only	The backup now status of AMAZON S3.
STR aMAZONS3Enable	1.3.6.1.4.1.171.50.1.3.1.1.15.1.5	DisplayString	read-only	The enable status of AMAZON S3.
aMAZONS3Entry	1.3.6.1.4.1.171.50.1.3.1.1.15.1		not-accessible	An entry in the AMAZON S3 table.
I32 aMAZONS3Num	1.3.6.1.4.1.171.50.1.3.1.1.15.1.1	Integer32	read-only	Instance number of the AMAZON S3 entry.
STR aMAZONS3Restore	1.3.6.1.4.1.171.50.1.3.1.1.15.1.7	DisplayString	read-only	The restore status of AMAZON S3.
STR aMAZONS3Schedule	1.3.6.1.4.1.171.50.1.3.1.1.15.1.3	DisplayString	read-only	The schedule of AMAZON S3.
STR aMAZONS3Status	1.3.6.1.4.1.171.50.1.3.1.1.15.1.4	DisplayString	read-only	The status of AMAZON S3.
aMAZONS3Table	1.3.6.1.4.1.171.50.1.3.1.1.15		not-accessible	A table of AMAZON S3 on the NAS device.
STR aMAZONS3Task	1.3.6.1.4.1.171.50.1.3.1.1.15.1.2	DisplayString	read-only	The task of the AMAZON S3.
d_link	1.3.6.1.4.1.171
dFSEntry	1.3.6.1.4.1.171.50.1.3.1.1.6.1		not-accessible	An entry in the DFS table.
STR dFSHost	1.3.6.1.4.1.171.50.1.3.1.1.6.1.3	DisplayString	read-only	The Host of DFS.
STR dFSLShareName	1.3.6.1.4.1.171.50.1.3.1.1.6.1.2	DisplayString	read-only	The local share name of the DFS.
I32 dFSNum	1.3.6.1.4.1.171.50.1.3.1.1.6.1.1	Integer32	read-only	Instance number of the DFS entry.
STR dFSRSharefolder	1.3.6.1.4.1.171.50.1.3.1.1.6.1.4	DisplayString	read-only	The remote share folder of DFS.
dFSTable	1.3.6.1.4.1.171.50.1.3.1.1.6		not-accessible	A table of Distributed File System on the NAS device.
STR diskCapacity	1.3.6.1.4.1.171.50.1.3.1.1.3.1.5	DisplayString	read-only	The capacity of the disk in bytes.
diskEntry	1.3.6.1.4.1.171.50.1.3.1.1.3.1		not-accessible	An entry in the physical disk table.
STR diskModel	1.3.6.1.4.1.171.50.1.3.1.1.3.1.3	DisplayString	read-only	The disk drive's model name.
STR diskName	1.3.6.1.4.1.171.50.1.3.1.1.3.1.2	DisplayString	read-only	The device name that the disk is connected to. Example : sda, sdb, sdc sdd
I32 diskNum	1.3.6.1.4.1.171.50.1.3.1.1.3.1.1	Integer32	read-only	Instance number of the disk entry.
STR diskStatus	1.3.6.1.4.1.171.50.1.3.1.1.3.1.6	DisplayString	read-only	The status of the disk. has disk : Online no disk : Offline
diskTable	1.3.6.1.4.1.171.50.1.3.1.1.3		not-accessible	A table of physical disks attached to the NAS device.
STR diskTemperature	1.3.6.1.4.1.171.50.1.3.1.1.3.1.4	DisplayString	read-only	The centigrade temperature of this disk.
iSCSIACLEntry	1.3.6.1.4.1.171.50.1.3.1.1.14.1		not-accessible	An entry in the iSCSI ACL table.
STR iSCSIACLInitiator	1.3.6.1.4.1.171.50.1.3.1.1.14.1.3	DisplayString	read-only	The iniator name of iSCSI ACL.
STR iSCSIACLName	1.3.6.1.4.1.171.50.1.3.1.1.14.1.2	DisplayString	read-only	The name of the iSCSI ACL.
I32 iSCSIACLNum	1.3.6.1.4.1.171.50.1.3.1.1.14.1.1	Integer32	read-only	Instance number of the iSCSIACL entry.
iSCSIACLTable	1.3.6.1.4.1.171.50.1.3.1.1.14		not-accessible	A table of iSCSI ACL on the NAS device.
iSCSILUNEntry	1.3.6.1.4.1.171.50.1.3.1.1.13.1		not-accessible	An entry in the iSCSI LUN table.
STR iSCSILUNMapping	1.3.6.1.4.1.171.50.1.3.1.1.13.1.6	DisplayString	read-only	The mapping of iSCSI LUN.
STR iSCSILUNName	1.3.6.1.4.1.171.50.1.3.1.1.13.1.2	DisplayString	read-only	The name of the iSCSI LUN.
I32 iSCSILUNNum	1.3.6.1.4.1.171.50.1.3.1.1.13.1.1	Integer32	read-only	Instance number of the iSCSI Target entry.
STR iSCSILUNSize	1.3.6.1.4.1.171.50.1.3.1.1.13.1.4	DisplayString	read-only	The size of iSCSI LUN.
STR iSCSILUNStatus	1.3.6.1.4.1.171.50.1.3.1.1.13.1.5	DisplayString	read-only	The status of iSCSI LUN.
iSCSILUNTable	1.3.6.1.4.1.171.50.1.3.1.1.13		not-accessible	A table of iSCSI LUN on the NAS device.
STR iSCSILUNVolume	1.3.6.1.4.1.171.50.1.3.1.1.13.1.3	DisplayString	read-only	The volume of iSCSI LUN.
iSCSITargetEntry	1.3.6.1.4.1.171.50.1.3.1.1.12.1		not-accessible	An entry in the iSCSITarget table.
STR iSCSITargetIQN	1.3.6.1.4.1.171.50.1.3.1.1.12.1.2	DisplayString	read-only	The IQN of the iSCSI Target.
I32 iSCSITargetNum	1.3.6.1.4.1.171.50.1.3.1.1.12.1.1	Integer32	read-only	Instance number of the iSCSI Target entry.
STR iSCSITargetStatus	1.3.6.1.4.1.171.50.1.3.1.1.12.1.3	DisplayString	read-only	The status of iSCSI Target.
iSCSITargetTable	1.3.6.1.4.1.171.50.1.3.1.1.12		not-accessible	A table of iSCSI targets on the NAS device.
iSOEntry	1.3.6.1.4.1.171.50.1.3.1.1.8.1		not-accessible	An entry in the ISO table.
I32 iSONum	1.3.6.1.4.1.171.50.1.3.1.1.8.1.1	Integer32	read-only	Instance number of the ISO entry.
STR iSOPath	1.3.6.1.4.1.171.50.1.3.1.1.8.1.3	DisplayString	read-only	The path of the ISO.
STR iSOShareName	1.3.6.1.4.1.171.50.1.3.1.1.8.1.2	DisplayString	read-only	The share name of the ISO.
STR iSOStatus	1.3.6.1.4.1.171.50.1.3.1.1.8.1.4	DisplayString	read-only	The status of ISO.
iSOTable	1.3.6.1.4.1.171.50.1.3.1.1.8		not-accessible	A table of ISO fileon the NAS device.
logServerEntry	1.3.6.1.4.1.171.50.1.3.1.1.9.1		not-accessible	An entry in the logServer table.
STR logServerLogfiles	1.3.6.1.4.1.171.50.1.3.1.1.9.1.3	DisplayString	read-only	The log files of syslog server.
I32 logServerNum	1.3.6.1.4.1.171.50.1.3.1.1.9.1.1	Integer32	read-only	Instance number of the logServer entry.
STR logServerRuleName	1.3.6.1.4.1.171.50.1.3.1.1.9.1.2	DisplayString	read-only	The rule name of the syslog server.
STR logServerStatus	1.3.6.1.4.1.171.50.1.3.1.1.9.1.4	DisplayString	read-only	The staus of syslog server.
logServerTable	1.3.6.1.4.1.171.50.1.3.1.1.9		not-accessible	A table of syslog server on the NAS device.
modelID	1.3.6.1.4.1.171.50.1.3
nasAgent1100	1.3.6.1.4.1.171.50.1.3.1.1
STR nasAgentVer	1.3.6.1.4.1.171.50.1.3.1.1.1	DisplayString	read-only	version information for the agent of SNMP of DNS110004.
nFSEntry	1.3.6.1.4.1.171.50.1.3.1.1.7.1		not-accessible	An entry in the NFS table.
STR nFSHost	1.3.6.1.4.1.171.50.1.3.1.1.7.1.3	DisplayString	read-only	The host of the NFS.
STR nFSMountPath	1.3.6.1.4.1.171.50.1.3.1.1.7.1.2	DisplayString	read-only	The mount path of the NFS.
I32 nFSNum	1.3.6.1.4.1.171.50.1.3.1.1.7.1.1	Integer32	read-only	Instance number of the NFS entry.
STR nFSPermission	1.3.6.1.4.1.171.50.1.3.1.1.7.1.4	DisplayString	read-only	The permission of NFS.
STR nFSRootSquash	1.3.6.1.4.1.171.50.1.3.1.1.7.1.5	DisplayString	read-only	The root squash of NFS.
STR nFSStatus	1.3.6.1.4.1.171.50.1.3.1.1.7.1.6	DisplayString	read-only	The status of NFS.
nFSTable	1.3.6.1.4.1.171.50.1.3.1.1.7		not-accessible	A table of Network File System on the NAS device.
NTF notifyDiskInsertion	1.3.6.1.4.1.171.50.1.3.1.1.200.8			An indication that disk insertion .
NTF notifyDiskLost	1.3.6.1.4.1.171.50.1.3.1.1.200.7			An indication that disk lost .
notifyEvts	1.3.6.1.4.1.171.50.1.3.1.1.200
NTF notifyFirmwareUpgraded	1.3.6.1.4.1.171.50.1.3.1.1.200.6			An indication that firmware has been upgraded.
NTF notifyHDFull	1.3.6.1.4.1.171.50.1.3.1.1.200.18			An indication that HD Full .
NTF notifyNetworketh0Changed	1.3.6.1.4.1.171.50.1.3.1.1.200.2			An indication that the network eth0 settings has been changed.
NTF notifyNetworketh1Changed	1.3.6.1.4.1.171.50.1.3.1.1.200.3			An indication that the network eth1 settings has been changed.
NTF notifyPasswdChanged	1.3.6.1.4.1.171.50.1.3.1.1.200.1			An indication that the Administrator's password has been changed.
NTF notifyPowerFailure	1.3.6.1.4.1.171.50.1.3.1.1.200.5			An indication that System has rebooted from power failure.
NTF notifyRaidFailed	1.3.6.1.4.1.171.50.1.3.1.1.200.9			An indication that disk fail .
NTF notifySeleftest	1.3.6.1.4.1.171.50.1.3.1.1.200.20			An indication that Self test results .
NTF notifyTemperatureExceeded	1.3.6.1.4.1.171.50.1.3.1.1.200.4			An indication that system temperature has exceeded .
NTF notifyVolumeCreateFailed	1.3.6.1.4.1.171.50.1.3.1.1.200.11			An indication that volume create failed .
NTF notifyVolumeCreateSuccess	1.3.6.1.4.1.171.50.1.3.1.1.200.10			An indication that volume create successfully .
NTF notifyVolumeRemoveFailed	1.3.6.1.4.1.171.50.1.3.1.1.200.13			An indication that volume remove failed .
NTF notifyVolumeRemoveSuccess	1.3.6.1.4.1.171.50.1.3.1.1.200.12			An indication that volume remove successfully .
NTF notifyVolumeSpace	1.3.6.1.4.1.171.50.1.3.1.1.200.19			An indication that Volume space .
NTF notifyVolumeStatusCrashed	1.3.6.1.4.1.171.50.1.3.1.1.200.14			An indication that volume status crashed .
NTF notifyVolumeStatusDegraded	1.3.6.1.4.1.171.50.1.3.1.1.200.15			An indication that volume status degraded .
NTF notifyVolumeStatusREBUILD	1.3.6.1.4.1.171.50.1.3.1.1.200.16			An indication that volume status REBUILD .
NTF notifyVolumeStatusREBUILT	1.3.6.1.4.1.171.50.1.3.1.1.200.17			An indication that volume status REBUILT .
productID	1.3.6.1.4.1.171.50
projectID	1.3.6.1.4.1.171.50.1
STR snapShotCount	1.3.6.1.4.1.171.50.1.3.1.1.5.1.5	DisplayString	read-only	The count squash of SnapShot.
snapShotEntry	1.3.6.1.4.1.171.50.1.3.1.1.5.1		not-accessible	An entry in the SnapShot table.
STR snapShotName	1.3.6.1.4.1.171.50.1.3.1.1.5.1.3	DisplayString	read-only	The name of the SnapShot.
I32 snapShotNum	1.3.6.1.4.1.171.50.1.3.1.1.5.1.1	Integer32	read-only	Instance number of the SnapShot entry.
STR snapShotPath	1.3.6.1.4.1.171.50.1.3.1.1.5.1.7	DisplayString	read-only	The path of SnapShot.
STR snapShotSchedule	1.3.6.1.4.1.171.50.1.3.1.1.5.1.4	DisplayString	read-only	The schedule of SnapShot.
STR snapShotState	1.3.6.1.4.1.171.50.1.3.1.1.5.1.6	DisplayString	read-only	The state of SnapShot.
snapShotTable	1.3.6.1.4.1.171.50.1.3.1.1.5		not-accessible	A table of Volume SnapShot on the NAS device.
STR snapShotVolume	1.3.6.1.4.1.171.50.1.3.1.1.5.1.2	DisplayString	read-only	The volume of the SnapShot.
submodelID	1.3.6.1.4.1.171.50.1.3.1
STR sysAFP	1.3.6.1.4.1.171.50.1.3.1.1.2.1.13	DisplayString	read-only	AFP status. 1 : enable 0 : disable
STR sysCIFS	1.3.6.1.4.1.171.50.1.3.1.1.2.1.8	DisplayString	read-only	Samba status. 1 : enable 0 : disable
STR sysDFSServer	1.3.6.1.4.1.171.50.1.3.1.1.2.1.11	DisplayString	read-only	DFS Server status. 1 : enable 0 : disable
sysEntry	1.3.6.1.4.1.171.50.1.3.1.1.2.1		not-accessible	An entry in the system info table.
STR sysFanSpeed	1.3.6.1.4.1.171.50.1.3.1.1.2.1.5	DisplayString	read-only	The current speed of the fan. (high, low, stop.)
STR sysFtpServer	1.3.6.1.4.1.171.50.1.3.1.1.2.1.9	DisplayString	read-only	Ftp Server status. 1 : enable 0 : disable
STR sysFWVer	1.3.6.1.4.1.171.50.1.3.1.1.2.1.3	DisplayString	read-only	The device firmware version
STR sysiSCSITarget	1.3.6.1.4.1.171.50.1.3.1.1.2.1.16	DisplayString	read-only	iSCSI target status. 1 : enable 0 : disable
STR sysiSNS	1.3.6.1.4.1.171.50.1.3.1.1.2.1.17	DisplayString	read-only	iSNS Server status. 1 : enable 0 : disable
STR sysName	1.3.6.1.4.1.171.50.1.3.1.1.2.1.2	DisplayString	read-only	The device name
STR sysNetType	1.3.6.1.4.1.171.50.1.3.1.1.2.1.4	DisplayString	read-only	The Network type. ( 0 : Workgroup 1 : Active Directory)
STR sysNFSServer	1.3.6.1.4.1.171.50.1.3.1.1.2.1.10	DisplayString	read-only	NFS Server status. 1 : enable 0 : disable
I32 sysNum	1.3.6.1.4.1.171.50.1.3.1.1.2.1.1	Integer32	read-only	Instance number of the system info entry.
STR sysPrinterName	1.3.6.1.4.1.171.50.1.3.1.1.2.1.7	DisplayString	read-only	The mode name of printer
STR sysQuota	1.3.6.1.4.1.171.50.1.3.1.1.2.1.12	DisplayString	read-only	Quota status. 1 : enable 0 : disable
sysTable	1.3.6.1.4.1.171.50.1.3.1.1.2		not-accessible	A table of system info of the NAS device.
STR sysTemperature	1.3.6.1.4.1.171.50.1.3.1.1.2.1.6	DisplayString	read-only	The centigrade temperature of the system.
STR sysWebDAV	1.3.6.1.4.1.171.50.1.3.1.1.2.1.14	DisplayString	read-only	WebDAV status. 1 : enable 0 : disable
STR sysWebFileServer	1.3.6.1.4.1.171.50.1.3.1.1.2.1.15	DisplayString	read-only	WebFile Server status. 1 : enable 0 : disable
STR uPSAllowedIP	1.3.6.1.4.1.171.50.1.3.1.1.10.1.8	DisplayString	read-only	The allowed IP of UPS.
STR uPSBattery	1.3.6.1.4.1.171.50.1.3.1.1.10.1.5	DisplayString	read-only	The battery of UPS.
STR uPSDeviceInfo	1.3.6.1.4.1.171.50.1.3.1.1.10.1.2	DisplayString	read-only	The deviceinfo of the UPS.
uPSEntry	1.3.6.1.4.1.171.50.1.3.1.1.10.1		not-accessible	An entry in the UPS table.
STR uPSManufacturer	1.3.6.1.4.1.171.50.1.3.1.1.10.1.4	DisplayString	read-only	The manufacturer of UPS.
I32 uPSNum	1.3.6.1.4.1.171.50.1.3.1.1.10.1.1	Integer32	read-only	Instance number of the uPS entry.
STR uPSProduct	1.3.6.1.4.1.171.50.1.3.1.1.10.1.3	DisplayString	read-only	The product of UPS.
STR uPSServerIP	1.3.6.1.4.1.171.50.1.3.1.1.10.1.7	DisplayString	read-only	The server IP of UPS.
STR uPSState	1.3.6.1.4.1.171.50.1.3.1.1.10.1.6	DisplayString	read-only	The state of SnapShot.
uPSTable	1.3.6.1.4.1.171.50.1.3.1.1.10		not-accessible	A table of UPS on the NAS device.
STR volumeEncryption	1.3.6.1.4.1.171.50.1.3.1.1.4.1.3	DisplayString	read-only	The encryption of the volume.
volumeEntry	1.3.6.1.4.1.171.50.1.3.1.1.4.1		not-accessible	An entry in the volume table.
STR volumeFreeSpace	1.3.6.1.4.1.171.50.1.3.1.1.4.1.7	DisplayString	read-only	Free space on the volume in bytes.
STR volumeFsType	1.3.6.1.4.1.171.50.1.3.1.1.4.1.4	DisplayString	read-only	The type of file systme of the volume. Example : ext2 or ext3
STR volumeName	1.3.6.1.4.1.171.50.1.3.1.1.4.1.2	DisplayString	read-only	The name of the volume.
I32 volumeNum	1.3.6.1.4.1.171.50.1.3.1.1.4.1.1	Integer32	read-only	Instance number of the volume entry.
STR volumeRaidLevel	1.3.6.1.4.1.171.50.1.3.1.1.4.1.5	DisplayString	read-only	The RAID level of the volume.
STR volumeSize	1.3.6.1.4.1.171.50.1.3.1.1.4.1.6	DisplayString	read-only	The size of the volume in bytes.
STR volumeState	1.3.6.1.4.1.171.50.1.3.1.1.4.1.8	DisplayString	read-only	The state of the volume.
volumeTable	1.3.6.1.4.1.171.50.1.3.1.1.4		not-accessible	A table of active volumes on the NAS device.
vVEntry	1.3.6.1.4.1.171.50.1.3.1.1.11.1		not-accessible	An entry in the Virtual Volume table.
I32 vVNum	1.3.6.1.4.1.171.50.1.3.1.1.11.1.1	Integer32	read-only	Instance number of the Virtual Volume entry.
STR vVSharefolder	1.3.6.1.4.1.171.50.1.3.1.1.11.1.3	DisplayString	read-only	The share folder of Virtual Volume.
STR vVSize	1.3.6.1.4.1.171.50.1.3.1.1.11.1.5	DisplayString	read-only	The size of Virtual Volume.
STR vVStatus	1.3.6.1.4.1.171.50.1.3.1.1.11.1.4	DisplayString	read-only	The status of Virtual Volume.
vVTable	1.3.6.1.4.1.171.50.1.3.1.1.11		not-accessible	A table of Virtual Volume on the NAS device.
STR vVTargetName	1.3.6.1.4.1.171.50.1.3.1.1.11.1.2	DisplayString	read-only	The target name of the Virtual Volume.

RFC description

Manages DNS110004 NAS device attributes including system information, fan speeds, temperature, and printer configuration.

Start monitoring D-Link DNS-110004 series NAS with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DNS110004-MIB

What Is DNS110004-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description