DNS120005-MIB

All MIBs › DNS120005-MIB

Category: Domain: Storage, Vendor: D-Link

Description: Provides device-specific management objects for D-Link DNS-120005 series NAS storage systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DNS120005-MIB?

DNS120005-MIB is a vendor-specific MIB for D-Link's DNS-120005 series network-attached storage (NAS) systems. Based on the product class it would expose system, storage, and status data covering disk/bay health, RAID or volume status, and system identification, though no object list was supplied for this module. Its expected monitoring value centers on hardware/software status: disk health per bay, degraded-versus-healthy volume state, system uptime, and firmware version would let an admin detect a failed drive or a degraded storage array before data loss occurs. It likely builds on standard MIB-II/HOST-RESOURCES-MIB conventions under D-Link's private enterprise tree, though this cannot be confirmed without the object list. It is deployed in small-office/home environments as the management interface for the DNS-120005 NAS unit. Engineers can download the DNS120005-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DNS120005-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DNS-120005 NAS appliance

Monitoring Examples

The source data supplied no sample object or table names for this module, so a concrete polling scenario cannot be tied to real OIDs; in general, an admin managing this class of D-Link NAS would poll per-disk health and RAID/volume-status data to detect a failing drive or a degraded array, but this description is based on the product class rather than confirmed object names from the MIB itself.

What Can Be Monitored

disk/bay health status
RAID or volume status
system uptime
firmware version

Imported Objects

From SNMPv2-SMI

Integer32
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
d_link	1.3.6.1.4.1.171
productID	1.3.6.1.4.1.171.50
projectID	1.3.6.1.4.1.171.50.1
modelID	1.3.6.1.4.1.171.50.1.1
submodelID	1.3.6.1.4.1.171.50.1.1.1
nasAgent1200	1.3.6.1.4.1.171.50.1.1.1.1
STR nasAgentVer	1.3.6.1.4.1.171.50.1.1.1.1.1	DisplayString	read-only	version information for the agent of SNMP of DNS120005.
sysTable	1.3.6.1.4.1.171.50.1.1.1.1.2		not-accessible	A table of system info of the NAS device.
sysEntry	1.3.6.1.4.1.171.50.1.1.1.1.2.1		not-accessible	An entry in the system info table.
I32 sysNum	1.3.6.1.4.1.171.50.1.1.1.1.2.1.1	Integer32	read-only	Instance number of the system info entry.
STR sysName	1.3.6.1.4.1.171.50.1.1.1.1.2.1.2	DisplayString	read-only	The device name
STR sysFWVer	1.3.6.1.4.1.171.50.1.1.1.1.2.1.3	DisplayString	read-only	The device firmware version
STR sysNetType	1.3.6.1.4.1.171.50.1.1.1.1.2.1.4	DisplayString	read-only	The Network type. ( 0 : Workgroup 1 : Active Directory)
STR sysFanSpeed	1.3.6.1.4.1.171.50.1.1.1.1.2.1.5	DisplayString	read-only	The current speed of the fan. (high, low, stop.)
STR sysTemperature	1.3.6.1.4.1.171.50.1.1.1.1.2.1.6	DisplayString	read-only	The centigrade temperature of the system.
STR sysPrinterName	1.3.6.1.4.1.171.50.1.1.1.1.2.1.7	DisplayString	read-only	The mode name of printer
STR sysCIFS	1.3.6.1.4.1.171.50.1.1.1.1.2.1.8	DisplayString	read-only	Samba status. 1 : enable 0 : disable
STR sysFtpServer	1.3.6.1.4.1.171.50.1.1.1.1.2.1.9	DisplayString	read-only	Ftp Server status. 1 : enable 0 : disable
STR sysNFSServer	1.3.6.1.4.1.171.50.1.1.1.1.2.1.10	DisplayString	read-only	NFS Server status. 1 : enable 0 : disable
STR sysDFSServer	1.3.6.1.4.1.171.50.1.1.1.1.2.1.11	DisplayString	read-only	DFS Server status. 1 : enable 0 : disable
STR sysQuota	1.3.6.1.4.1.171.50.1.1.1.1.2.1.12	DisplayString	read-only	Quota status. 1 : enable 0 : disable
STR sysAFP	1.3.6.1.4.1.171.50.1.1.1.1.2.1.13	DisplayString	read-only	AFP status. 1 : enable 0 : disable
STR sysWebDAV	1.3.6.1.4.1.171.50.1.1.1.1.2.1.14	DisplayString	read-only	WebDAV status. 1 : enable 0 : disable
STR sysWebFileServer	1.3.6.1.4.1.171.50.1.1.1.1.2.1.15	DisplayString	read-only	WebFile Server status. 1 : enable 0 : disable
STR sysiSCSITarget	1.3.6.1.4.1.171.50.1.1.1.1.2.1.16	DisplayString	read-only	iSCSI target status. 1 : enable 0 : disable
STR sysiSNS	1.3.6.1.4.1.171.50.1.1.1.1.2.1.17	DisplayString	read-only	iSNS Server status. 1 : enable 0 : disable
diskTable	1.3.6.1.4.1.171.50.1.1.1.1.3		not-accessible	A table of physical disks attached to the NAS device.
diskEntry	1.3.6.1.4.1.171.50.1.1.1.1.3.1		not-accessible	An entry in the physical disk table.
I32 diskNum	1.3.6.1.4.1.171.50.1.1.1.1.3.1.1	Integer32	read-only	Instance number of the disk entry.
STR diskName	1.3.6.1.4.1.171.50.1.1.1.1.3.1.2	DisplayString	read-only	The device name that the disk is connected to. Example : sda, sdb, sdc sdd
STR diskModel	1.3.6.1.4.1.171.50.1.1.1.1.3.1.3	DisplayString	read-only	The disk drive's model name.
STR diskTemperature	1.3.6.1.4.1.171.50.1.1.1.1.3.1.4	DisplayString	read-only	The centigrade temperature of this disk.
STR diskCapacity	1.3.6.1.4.1.171.50.1.1.1.1.3.1.5	DisplayString	read-only	The capacity of the disk in bytes.
STR diskStatus	1.3.6.1.4.1.171.50.1.1.1.1.3.1.6	DisplayString	read-only	The status of the disk. has disk : Online no disk : Offline
volumeTable	1.3.6.1.4.1.171.50.1.1.1.1.4		not-accessible	A table of active volumes on the NAS device.
volumeEntry	1.3.6.1.4.1.171.50.1.1.1.1.4.1		not-accessible	An entry in the volume table.
I32 volumeNum	1.3.6.1.4.1.171.50.1.1.1.1.4.1.1	Integer32	read-only	Instance number of the volume entry.
STR volumeName	1.3.6.1.4.1.171.50.1.1.1.1.4.1.2	DisplayString	read-only	The name of the volume.
STR volumeEncryption	1.3.6.1.4.1.171.50.1.1.1.1.4.1.3	DisplayString	read-only	The encryption of the volume.
STR volumeFsType	1.3.6.1.4.1.171.50.1.1.1.1.4.1.4	DisplayString	read-only	The type of file systme of the volume. Example : ext2 or ext3
STR volumeRaidLevel	1.3.6.1.4.1.171.50.1.1.1.1.4.1.5	DisplayString	read-only	The RAID level of the volume.
STR volumeSize	1.3.6.1.4.1.171.50.1.1.1.1.4.1.6	DisplayString	read-only	The size of the volume in bytes.
STR volumeFreeSpace	1.3.6.1.4.1.171.50.1.1.1.1.4.1.7	DisplayString	read-only	Free space on the volume in bytes.
STR volumeState	1.3.6.1.4.1.171.50.1.1.1.1.4.1.8	DisplayString	read-only	The state of the volume.
snapShotTable	1.3.6.1.4.1.171.50.1.1.1.1.5		not-accessible	A table of Volume SnapShot on the NAS device.
snapShotEntry	1.3.6.1.4.1.171.50.1.1.1.1.5.1		not-accessible	An entry in the SnapShot table.
I32 snapShotNum	1.3.6.1.4.1.171.50.1.1.1.1.5.1.1	Integer32	read-only	Instance number of the SnapShot entry.
STR snapShotVolume	1.3.6.1.4.1.171.50.1.1.1.1.5.1.2	DisplayString	read-only	The volume of the SnapShot.
STR snapShotName	1.3.6.1.4.1.171.50.1.1.1.1.5.1.3	DisplayString	read-only	The name of the SnapShot.
STR snapShotSchedule	1.3.6.1.4.1.171.50.1.1.1.1.5.1.4	DisplayString	read-only	The schedule of SnapShot.
STR snapShotCount	1.3.6.1.4.1.171.50.1.1.1.1.5.1.5	DisplayString	read-only	The count squash of SnapShot.
STR snapShotState	1.3.6.1.4.1.171.50.1.1.1.1.5.1.6	DisplayString	read-only	The state of SnapShot.
STR snapShotPath	1.3.6.1.4.1.171.50.1.1.1.1.5.1.7	DisplayString	read-only	The path of SnapShot.
dFSTable	1.3.6.1.4.1.171.50.1.1.1.1.6		not-accessible	A table of Distributed File System on the NAS device.
dFSEntry	1.3.6.1.4.1.171.50.1.1.1.1.6.1		not-accessible	An entry in the DFS table.
I32 dFSNum	1.3.6.1.4.1.171.50.1.1.1.1.6.1.1	Integer32	read-only	Instance number of the DFS entry.
STR dFSLShareName	1.3.6.1.4.1.171.50.1.1.1.1.6.1.2	DisplayString	read-only	The local share name of the DFS.
STR dFSHost	1.3.6.1.4.1.171.50.1.1.1.1.6.1.3	DisplayString	read-only	The Host of DFS.
STR dFSRSharefolder	1.3.6.1.4.1.171.50.1.1.1.1.6.1.4	DisplayString	read-only	The remote share folder of DFS.
nFSTable	1.3.6.1.4.1.171.50.1.1.1.1.7		not-accessible	A table of Network File System on the NAS device.
nFSEntry	1.3.6.1.4.1.171.50.1.1.1.1.7.1		not-accessible	An entry in the NFS table.
I32 nFSNum	1.3.6.1.4.1.171.50.1.1.1.1.7.1.1	Integer32	read-only	Instance number of the NFS entry.
STR nFSMountPath	1.3.6.1.4.1.171.50.1.1.1.1.7.1.2	DisplayString	read-only	The mount path of the NFS.
STR nFSHost	1.3.6.1.4.1.171.50.1.1.1.1.7.1.3	DisplayString	read-only	The host of the NFS.
STR nFSPermission	1.3.6.1.4.1.171.50.1.1.1.1.7.1.4	DisplayString	read-only	The permission of NFS.
STR nFSRootSquash	1.3.6.1.4.1.171.50.1.1.1.1.7.1.5	DisplayString	read-only	The root squash of NFS.
STR nFSStatus	1.3.6.1.4.1.171.50.1.1.1.1.7.1.6	DisplayString	read-only	The status of NFS.
iSOTable	1.3.6.1.4.1.171.50.1.1.1.1.8		not-accessible	A table of ISO fileon the NAS device.
iSOEntry	1.3.6.1.4.1.171.50.1.1.1.1.8.1		not-accessible	An entry in the ISO table.
I32 iSONum	1.3.6.1.4.1.171.50.1.1.1.1.8.1.1	Integer32	read-only	Instance number of the ISO entry.
STR iSOShareName	1.3.6.1.4.1.171.50.1.1.1.1.8.1.2	DisplayString	read-only	The share name of the ISO.
STR iSOPath	1.3.6.1.4.1.171.50.1.1.1.1.8.1.3	DisplayString	read-only	The path of the ISO.
STR iSOStatus	1.3.6.1.4.1.171.50.1.1.1.1.8.1.4	DisplayString	read-only	The status of ISO.
logServerTable	1.3.6.1.4.1.171.50.1.1.1.1.9		not-accessible	A table of syslog server on the NAS device.
logServerEntry	1.3.6.1.4.1.171.50.1.1.1.1.9.1		not-accessible	An entry in the logServer table.
I32 logServerNum	1.3.6.1.4.1.171.50.1.1.1.1.9.1.1	Integer32	read-only	Instance number of the logServer entry.
STR logServerRuleName	1.3.6.1.4.1.171.50.1.1.1.1.9.1.2	DisplayString	read-only	The rule name of the syslog server.
STR logServerLogfiles	1.3.6.1.4.1.171.50.1.1.1.1.9.1.3	DisplayString	read-only	The log files of syslog server.
STR logServerStatus	1.3.6.1.4.1.171.50.1.1.1.1.9.1.4	DisplayString	read-only	The staus of syslog server.
uPSTable	1.3.6.1.4.1.171.50.1.1.1.1.10		not-accessible	A table of UPS on the NAS device.
uPSEntry	1.3.6.1.4.1.171.50.1.1.1.1.10.1		not-accessible	An entry in the UPS table.
I32 uPSNum	1.3.6.1.4.1.171.50.1.1.1.1.10.1.1	Integer32	read-only	Instance number of the uPS entry.
STR uPSDeviceInfo	1.3.6.1.4.1.171.50.1.1.1.1.10.1.2	DisplayString	read-only	The deviceinfo of the UPS.
STR uPSProduct	1.3.6.1.4.1.171.50.1.1.1.1.10.1.3	DisplayString	read-only	The product of UPS.
STR uPSManufacturer	1.3.6.1.4.1.171.50.1.1.1.1.10.1.4	DisplayString	read-only	The manufacturer of UPS.
STR uPSBattery	1.3.6.1.4.1.171.50.1.1.1.1.10.1.5	DisplayString	read-only	The battery of UPS.
STR uPSState	1.3.6.1.4.1.171.50.1.1.1.1.10.1.6	DisplayString	read-only	The state of SnapShot.
STR uPSServerIP	1.3.6.1.4.1.171.50.1.1.1.1.10.1.7	DisplayString	read-only	The server IP of UPS.
STR uPSAllowedIP	1.3.6.1.4.1.171.50.1.1.1.1.10.1.8	DisplayString	read-only	The allowed IP of UPS.
vVTable	1.3.6.1.4.1.171.50.1.1.1.1.11		not-accessible	A table of Virtual Volume on the NAS device.
vVEntry	1.3.6.1.4.1.171.50.1.1.1.1.11.1		not-accessible	An entry in the Virtual Volume table.
I32 vVNum	1.3.6.1.4.1.171.50.1.1.1.1.11.1.1	Integer32	read-only	Instance number of the Virtual Volume entry.
STR vVTargetName	1.3.6.1.4.1.171.50.1.1.1.1.11.1.2	DisplayString	read-only	The target name of the Virtual Volume.
STR vVSharefolder	1.3.6.1.4.1.171.50.1.1.1.1.11.1.3	DisplayString	read-only	The share folder of Virtual Volume.
STR vVStatus	1.3.6.1.4.1.171.50.1.1.1.1.11.1.4	DisplayString	read-only	The status of Virtual Volume.
STR vVSize	1.3.6.1.4.1.171.50.1.1.1.1.11.1.5	DisplayString	read-only	The size of Virtual Volume.
iSCSITargetTable	1.3.6.1.4.1.171.50.1.1.1.1.12		not-accessible	A table of iSCSI targets on the NAS device.
iSCSITargetEntry	1.3.6.1.4.1.171.50.1.1.1.1.12.1		not-accessible	An entry in the iSCSITarget table.
I32 iSCSITargetNum	1.3.6.1.4.1.171.50.1.1.1.1.12.1.1	Integer32	read-only	Instance number of the iSCSI Target entry.
STR iSCSITargetIQN	1.3.6.1.4.1.171.50.1.1.1.1.12.1.2	DisplayString	read-only	The IQN of the iSCSI Target.
STR iSCSITargetStatus	1.3.6.1.4.1.171.50.1.1.1.1.12.1.3	DisplayString	read-only	The status of iSCSI Target.
iSCSILUNTable	1.3.6.1.4.1.171.50.1.1.1.1.13		not-accessible	A table of iSCSI LUN on the NAS device.
iSCSILUNEntry	1.3.6.1.4.1.171.50.1.1.1.1.13.1		not-accessible	An entry in the iSCSI LUN table.
I32 iSCSILUNNum	1.3.6.1.4.1.171.50.1.1.1.1.13.1.1	Integer32	read-only	Instance number of the iSCSI Target entry.
STR iSCSILUNName	1.3.6.1.4.1.171.50.1.1.1.1.13.1.2	DisplayString	read-only	The name of the iSCSI LUN.
STR iSCSILUNVolume	1.3.6.1.4.1.171.50.1.1.1.1.13.1.3	DisplayString	read-only	The volume of iSCSI LUN.
STR iSCSILUNSize	1.3.6.1.4.1.171.50.1.1.1.1.13.1.4	DisplayString	read-only	The size of iSCSI LUN.
STR iSCSILUNStatus	1.3.6.1.4.1.171.50.1.1.1.1.13.1.5	DisplayString	read-only	The status of iSCSI LUN.
STR iSCSILUNMapping	1.3.6.1.4.1.171.50.1.1.1.1.13.1.6	DisplayString	read-only	The mapping of iSCSI LUN.
iSCSIACLTable	1.3.6.1.4.1.171.50.1.1.1.1.14		not-accessible	A table of iSCSI ACL on the NAS device.
iSCSIACLEntry	1.3.6.1.4.1.171.50.1.1.1.1.14.1		not-accessible	An entry in the iSCSI ACL table.
I32 iSCSIACLNum	1.3.6.1.4.1.171.50.1.1.1.1.14.1.1	Integer32	read-only	Instance number of the iSCSIACL entry.
STR iSCSIACLName	1.3.6.1.4.1.171.50.1.1.1.1.14.1.2	DisplayString	read-only	The name of the iSCSI ACL.
STR iSCSIACLInitiator	1.3.6.1.4.1.171.50.1.1.1.1.14.1.3	DisplayString	read-only	The iniator name of iSCSI ACL.
aMAZONS3Table	1.3.6.1.4.1.171.50.1.1.1.1.15		not-accessible	A table of AMAZON S3 on the NAS device.
aMAZONS3Entry	1.3.6.1.4.1.171.50.1.1.1.1.15.1		not-accessible	An entry in the AMAZON S3 table.
I32 aMAZONS3Num	1.3.6.1.4.1.171.50.1.1.1.1.15.1.1	Integer32	read-only	Instance number of the AMAZON S3 entry.
STR aMAZONS3Task	1.3.6.1.4.1.171.50.1.1.1.1.15.1.2	DisplayString	read-only	The task of the AMAZON S3.
STR aMAZONS3Schedule	1.3.6.1.4.1.171.50.1.1.1.1.15.1.3	DisplayString	read-only	The schedule of AMAZON S3.
STR aMAZONS3Status	1.3.6.1.4.1.171.50.1.1.1.1.15.1.4	DisplayString	read-only	The status of AMAZON S3.
STR aMAZONS3Enable	1.3.6.1.4.1.171.50.1.1.1.1.15.1.5	DisplayString	read-only	The enable status of AMAZON S3.
STR aMAZONS3BackupNow	1.3.6.1.4.1.171.50.1.1.1.1.15.1.6	DisplayString	read-only	The backup now status of AMAZON S3.
STR aMAZONS3Restore	1.3.6.1.4.1.171.50.1.1.1.1.15.1.7	DisplayString	read-only	The restore status of AMAZON S3.
connectionTable	1.3.6.1.4.1.171.50.1.1.1.1.16		not-accessible	A table of connection on the NAS device.
connectionEntry	1.3.6.1.4.1.171.50.1.1.1.1.16.1		not-accessible	An entry in the connection table.
I32 connectionNum	1.3.6.1.4.1.171.50.1.1.1.1.16.1.1	Integer32	read-only	Instance number of the connection entry.
STR connectionDateTime	1.3.6.1.4.1.171.50.1.1.1.1.16.1.2	DisplayString	read-only	The datetime of the connection.
STR connectionServiceType	1.3.6.1.4.1.171.50.1.1.1.1.16.1.3	DisplayString	read-only	The service type of connection.
STR connectionIPAddress	1.3.6.1.4.1.171.50.1.1.1.1.16.1.4	DisplayString	read-only	The ip address of connection.
STR connectionUser	1.3.6.1.4.1.171.50.1.1.1.1.16.1.5	DisplayString	read-only	The user of connection.
STR connectionComputerName	1.3.6.1.4.1.171.50.1.1.1.1.16.1.6	DisplayString	read-only	The computer name of connection.
STR connectionUsedResources	1.3.6.1.4.1.171.50.1.1.1.1.16.1.7	DisplayString	read-only	The used resources of connection.
portForwardingTable	1.3.6.1.4.1.171.50.1.1.1.1.17		not-accessible	A table of port forwarding on the NAS device.
portForwardingEntry	1.3.6.1.4.1.171.50.1.1.1.1.17.1		not-accessible	An entry in the port forwarding table.
I32 portForwardingNum	1.3.6.1.4.1.171.50.1.1.1.1.17.1.1	Integer32	read-only	Instance number of the port forwarding entry.
STR portForwardingEnable	1.3.6.1.4.1.171.50.1.1.1.1.17.1.2	DisplayString	read-only	The enable status of the port forwarding.
STR portForwardingStatus	1.3.6.1.4.1.171.50.1.1.1.1.17.1.3	DisplayString	read-only	The status of port forwarding.
STR portForwardingService	1.3.6.1.4.1.171.50.1.1.1.1.17.1.4	DisplayString	read-only	The service of port forwarding.
STR portForwardingProtocol	1.3.6.1.4.1.171.50.1.1.1.1.17.1.5	DisplayString	read-only	The protocol of port forwarding.
STR portForwardingExternalPort	1.3.6.1.4.1.171.50.1.1.1.1.17.1.6	DisplayString	read-only	The external port of port forwarding.
STR portForwardingInternalPort	1.3.6.1.4.1.171.50.1.1.1.1.17.1.7	DisplayString	read-only	The internal port of port forwarding.
notifyEvts	1.3.6.1.4.1.171.50.1.1.1.1.200
NTF notifyPasswdChanged	1.3.6.1.4.1.171.50.1.1.1.1.200.1			An indication that the Administrator's password has been changed.
NTF notifyNetworketh0Changed	1.3.6.1.4.1.171.50.1.1.1.1.200.2			An indication that the network eth0 settings has been changed.
NTF notifyNetworketh1Changed	1.3.6.1.4.1.171.50.1.1.1.1.200.3			An indication that the network eth1 settings has been changed.
NTF notifyTemperatureExceeded	1.3.6.1.4.1.171.50.1.1.1.1.200.4			An indication that system temperature has exceeded .
NTF notifyPowerFailure	1.3.6.1.4.1.171.50.1.1.1.1.200.5			An indication that System has rebooted from power failure.
NTF notifyFirmwareUpgraded	1.3.6.1.4.1.171.50.1.1.1.1.200.6			An indication that firmware has been upgraded.
NTF notifyDiskLost	1.3.6.1.4.1.171.50.1.1.1.1.200.7			An indication that disk lost .
NTF notifyDiskInsertion	1.3.6.1.4.1.171.50.1.1.1.1.200.8			An indication that disk insertion .
NTF notifyRaidFailed	1.3.6.1.4.1.171.50.1.1.1.1.200.9			An indication that disk fail .
NTF notifyVolumeCreateSuccess	1.3.6.1.4.1.171.50.1.1.1.1.200.10			An indication that volume create successfully .
NTF notifyVolumeCreateFailed	1.3.6.1.4.1.171.50.1.1.1.1.200.11			An indication that volume create failed .
NTF notifyVolumeRemoveSuccess	1.3.6.1.4.1.171.50.1.1.1.1.200.12			An indication that volume remove successfully .
NTF notifyVolumeRemoveFailed	1.3.6.1.4.1.171.50.1.1.1.1.200.13			An indication that volume remove failed .
NTF notifyVolumeStatusCrashed	1.3.6.1.4.1.171.50.1.1.1.1.200.14			An indication that volume status crashed .
NTF notifyVolumeStatusDegraded	1.3.6.1.4.1.171.50.1.1.1.1.200.15			An indication that volume status degraded .
NTF notifyVolumeStatusREBUILD	1.3.6.1.4.1.171.50.1.1.1.1.200.16			An indication that volume status REBUILD .
NTF notifyVolumeStatusREBUILT	1.3.6.1.4.1.171.50.1.1.1.1.200.17			An indication that volume status REBUILT .
NTF notifyHDFull	1.3.6.1.4.1.171.50.1.1.1.1.200.18			An indication that HD Full .
NTF notifyVolumeSpace	1.3.6.1.4.1.171.50.1.1.1.1.200.19			An indication that Volume space .
NTF notifySeleftest	1.3.6.1.4.1.171.50.1.1.1.1.200.20			An indication that Self test results .

RFC description

Manages system information and monitoring for D-Link DNS120005 NAS (Network Attached Storage) devices.

Start monitoring D-Link DNS-120005 NAS appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DNS120005-MIB

What Is DNS120005-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description