DNS-340L-MIB

All MIBs › DNS-340L-MIB

Category: Domain: Storage, Vendor: D-Link

Description: Provides management objects for the D-Link DNS-340L network-attached storage device monitoring and configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DNS-340L-MIB?

DNS-340L-MIB is a vendor-specific MIB for D-Link's DNS-340L network-attached storage (NAS) appliance, a small-office/home NAS unit. Based on the product class it would expose system, storage, and status data covering disk health, RAID/volume status, network interface state, and system identification, though no object list was supplied for this module. Its expected monitoring value centers on hardware/software status: per-bay disk presence and health, volume/RAID degraded-versus-healthy state, system uptime, and firmware version would let an admin detect a failed or failing disk or a degraded RAID array before data loss occurs. It likely builds on standard MIB-II/HOST-RESOURCES-MIB conventions under D-Link's private enterprise tree, though this cannot be confirmed without the object list. It is deployed in home and small-office environments as the management interface for the DNS-340L NAS unit. Engineers can download the DNS-340L-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DNS-340L-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DNS-340L NAS appliance

Monitoring Examples

The source data supplied no sample object or table names for this module, so a concrete polling scenario cannot be tied to real OIDs; in general, an admin managing this class of D-Link NAS would poll per-disk health and RAID/volume-status data to detect a failing drive or a degraded array before data loss occurs, but this description is based on the product class rather than confirmed object names from the MIB itself.

What Can Be Monitored

disk/bay health status
RAID or volume status
system uptime
firmware version

Imported Objects

From SNMPv2-SMI

Integer32
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
d_link	1.3.6.1.4.1.171
productID	1.3.6.1.4.1.171.50
projectID	1.3.6.1.4.1.171.50.1
modelID	1.3.6.1.4.1.171.50.1.10
submodelID	1.3.6.1.4.1.171.50.1.10.1
nasAgent	1.3.6.1.4.1.171.50.1.10.1.1
STR dns340LAgentVer	1.3.6.1.4.1.171.50.1.10.1.1.1	DisplayString	read-only	Version information for the agent of SNMP of DNS-340L.
STR dns340LSoftwareVersion	1.3.6.1.4.1.171.50.1.10.1.1.2	DisplayString	read-only	The device software version.
STR dns340LHostName	1.3.6.1.4.1.171.50.1.10.1.1.3	DisplayString	read-only	The device host name.
STR dns340LFTPServer	1.3.6.1.4.1.171.50.1.10.1.1.5	DisplayString	read-only	Ftp Server status. (Disable/Enable)
STR dns340LNetType	1.3.6.1.4.1.171.50.1.10.1.1.6	DisplayString	read-only	The Network type. (Workgroup/Active Directory)
STR dns340LTemperature	1.3.6.1.4.1.171.50.1.10.1.1.7	DisplayString	read-only	The temperature of the system.
STR dns340LFanStatus	1.3.6.1.4.1.171.50.1.10.1.1.8	DisplayString	read-only	The status of the fan
dns340LVolumeTable	1.3.6.1.4.1.171.50.1.10.1.1.9		not-accessible	A table of active volumes on the NAS device.
dns340LVolumeEntry	1.3.6.1.4.1.171.50.1.10.1.1.9.1		not-accessible	An entry in the volume table.
I32 dns340LVolumeNum	1.3.6.1.4.1.171.50.1.10.1.1.9.1.1	Integer32	read-only	Instance number of the volume entry.
STR dns340LVolumeName	1.3.6.1.4.1.171.50.1.10.1.1.9.1.2	DisplayString	read-only	The name of the volume.
STR dns340LVolumeFsType	1.3.6.1.4.1.171.50.1.10.1.1.9.1.3	DisplayString	read-only	The type of file system of the volume. Example : ext3 or ext4
STR dns340LVolumeRaidLevel	1.3.6.1.4.1.171.50.1.10.1.1.9.1.4	DisplayString	read-only	The RAID level of the volume. (STANDARD LINEAR RAID0 RAID1 RAID5 RAID10 RAID5+SPARE)
STR dns340LVolumeSize	1.3.6.1.4.1.171.50.1.10.1.1.9.1.5	DisplayString	read-only	The size of the volume in bytes.
STR dns340LVolumeFreeSpace	1.3.6.1.4.1.171.50.1.10.1.1.9.1.6	DisplayString	read-only	Free space on the volume in bytes.
dns340LDiskTable	1.3.6.1.4.1.171.50.1.10.1.1.10		not-accessible	A table of physical disks attached to the NAS device.
dns340LDiskEntry	1.3.6.1.4.1.171.50.1.10.1.1.10.1		not-accessible	An entry in the physical disk table.
I32 dns340LDiskNum	1.3.6.1.4.1.171.50.1.10.1.1.10.1.1	Integer32	read-only	Instance number of the disk entry.
STR dns340LDiskVendor	1.3.6.1.4.1.171.50.1.10.1.1.10.1.2	DisplayString	read-only	The vendor of the disk drive.
STR dns340LDiskModel	1.3.6.1.4.1.171.50.1.10.1.1.10.1.3	DisplayString	read-only	The disk drive's model name.
STR dns340LDiskSerialNumber	1.3.6.1.4.1.171.50.1.10.1.1.10.1.4	DisplayString	read-only	The disk drive's serial number.
STR dns340LDiskTemperature	1.3.6.1.4.1.171.50.1.10.1.1.10.1.5	DisplayString	read-only	The centigrade temperature of this disk.
STR dns340LDiskCapacity	1.3.6.1.4.1.171.50.1.10.1.1.10.1.6	DisplayString	read-only	The capacity of the disk in GB.
dns340LUPSTable	1.3.6.1.4.1.171.50.1.10.1.1.11		not-accessible	A table of UPS attached to the NAS device.
dns340LUPSEntry	1.3.6.1.4.1.171.50.1.10.1.1.11.1		not-accessible	An entry in the UPS table.
I32 dns340LUPSNum	1.3.6.1.4.1.171.50.1.10.1.1.11.1.1	Integer32	read-only	Instance number of the UPS entry.
STR dns340LUPSMode	1.3.6.1.4.1.171.50.1.10.1.1.11.1.2	DisplayString	read-only	The mode of the UPS
STR dns340LUPSManufacturer	1.3.6.1.4.1.171.50.1.10.1.1.11.1.3	DisplayString	read-only	The manufacturer of the UPS.
STR dns340LUPSProduct	1.3.6.1.4.1.171.50.1.10.1.1.11.1.4	DisplayString	read-only	The product name of the UPS.
STR dns340LUPSBatteryCharge	1.3.6.1.4.1.171.50.1.10.1.1.11.1.5	DisplayString	read-only	The battery charge of the UPS.
STR dns340LUPSStatus	1.3.6.1.4.1.171.50.1.10.1.1.11.1.6	DisplayString	read-only	The status of this UPS.
notifyEvts	1.3.6.1.4.1.171.50.1.10.1.1.200
NTF notifyPasswdChanged	1.3.6.1.4.1.171.50.1.10.1.1.200.1			An indication that the Administrator's password has been changed.
NTF notifyFirmwareUpgraded	1.3.6.1.4.1.171.50.1.10.1.1.200.2			An indication that firmware has been upgraded.
NTF notifyNetworkChanged	1.3.6.1.4.1.171.50.1.10.1.1.200.3			An indication that the network settings has been changed.
NTF notifyTemperatureExceeded	1.3.6.1.4.1.171.50.1.10.1.1.200.4			An indication that system temperature has exceeded.

RFC description

Network management for D-Link DNS-340L NAS (Network Attached Storage) devices.

Start monitoring D-Link DNS-340L NAS appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DNS-340L-MIB

What Is DNS-340L-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description