DGS-3700-12G-L3MGMT-MIB

All MIBs › DGS-3700-12G-L3MGMT-MIB

Last Updated: 2008-11-19

Category: Technology: Routing/L3, Vendor: D-Link

Description: L3 management MIB for D-Link DGS-3700-12G switch covering routing protocols and Layer 3 management features.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DGS-3700-12G-L3MGMT-MIB?

DGS-3700-12G-L3MGMT-MIB is a D-Link proprietary SNMP module for the DGS-3700-12G managed switch, defining the Layer 3 management information structure for routing-related features on that product. Its module description frames it as the top-level container for the switch's Layer 3 network management information, implying sub-areas covering routing protocol configuration and status, IP interface management, and related L3 features, though no concrete object names were captured in this batch. Its intended monitoring role is configuration and operational status of L3 routing functions on the switch rather than chassis hardware sensors, which are typically covered by a separate hardware/environment MIB in D-Link's structure. It commonly depends on or complements standard IETF routing MIBs (e.g., IP-MIB, OSPF-MIB) as well as D-Link's own enterprise MIB tree. It is typically deployed in small-to-midsize enterprise networks using the D-Link DGS-3700-12G as an L3-capable access/aggregation switch. Engineers can download the DGS-3700-12G-L3MGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DGS-3700-12G-L3MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link DGS-3700-12G managed Layer 3 switch

Monitoring Examples

Because no sample objects were available, a concrete monitoring scenario cannot be honestly constructed; in practice an admin would use this MIB's L3 management tables to check IP interface and routing configuration/state on the DGS-3700-12G, but the exact table/object names are not confirmed here. This entry is based on the module's stated purpose (Layer 3 network management information) rather than on verified object names.

What Can Be Monitored

Layer 3 routing configuration state (general, unconfirmed specifics)

Imported Objects

From IF-MIB

InterfaceIndex

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
TimeStamp
TruthValue

From SW3700PRIMGMT-MIB

dgs3712g

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
swL3MgmtMIB	1.3.6.1.4.1.171.11.102.1.2.3			The Structure of Layer 3 Network Management Information for the proprietary enterprise.
swL3IpMgmt	1.3.6.1.4.1.171.11.102.1.2.3.2
swL3IpCtrlMgmt	1.3.6.1.4.1.171.11.102.1.2.3.2.1
swL3IpCtrlTable	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3		not-accessible	This table contains IP interface information.
swL3IpCtrlEntry	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1		not-accessible	A list of information about a specific IP interface.
STR swL3IpCtrlInterfaceName	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
INT swL3IpCtrlIfIndex	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.2	INTEGER	read-only	This object uniquely identifies the IP interface number in the swL3IpCtrlTable.
IP swL3IpCtrlIpAddr	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.3	IpAddress	read-write	The IP address of the interface. This object only can take the value of the unicast IP address.
IP swL3IpCtrlIpSubnetMask	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.4	IpAddress	read-write	The IP net mask for this interface.
STR swL3IpCtrlVlanName	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.5	DisplayString	read-write	This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table.
INT swL3IpCtrlMode	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.8	INTEGER	read-write	This object indicates the IP operation mode. other(1) - This entry is currently in use but the conditions under which it will remain are determined by each of the following values. bootp(3) - The IP address will be set automatically from a BOOTP server. dhcp(4) - The IP address will be set automatically from a DHCP server.
INT swL3IpCtrlAdminState	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.9	INTEGER	read-write	The state of the IP interface.
ADR swL3IpCtrlIpv6LinkLocalAddress	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.14	Ipv6Address	read-only	The IPv6 link local address for this interface.
INT swL3IpCtrlIpv6LinkLocalPrefixLen	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.15	INTEGER	read-only	The IPv6 prefix length for this IPv6 link local address.
ROW swL3IpCtrlState	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.16	RowStatus	read-create	This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
INT swL3IpCtrlIpv6LinkLocalAutoState	1.3.6.1.4.1.171.11.102.1.2.3.2.1.3.1.17	INTEGER	read-write	The state of the IPv6 link local auto.
swL3Ipv6CtrlTable	1.3.6.1.4.1.171.11.102.1.2.3.2.1.4		not-accessible	This table contains IPv6 information of an IP interface.
swL3Ipv6CtrlEntry	1.3.6.1.4.1.171.11.102.1.2.3.2.1.4.1		not-accessible	A list of IPv6 information about a specific IP interface.
STR swL3Ipv6CtrlInterfaceName	1.3.6.1.4.1.171.11.102.1.2.3.2.1.4.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
U32 swL3Ipv6CtrlNsRetransTimer	1.3.6.1.4.1.171.11.102.1.2.3.2.1.4.1.3	Unsigned32	read-write	Neighbor solicitation's retransmit timer. The unit is set in milliseconds.
swL3Ipv6AddressCtrlTable	1.3.6.1.4.1.171.11.102.1.2.3.2.1.5		not-accessible	This table contains IPv6 address information for each IP interface.
swL3Ipv6AddressCtrlEntry	1.3.6.1.4.1.171.11.102.1.2.3.2.1.5.1		not-accessible	A list of information about a specific IPv6 address.
STR swL3Ipv6AddressCtrlInterfaceName	1.3.6.1.4.1.171.11.102.1.2.3.2.1.5.1.1	DisplayString	read-only	This object indicates the name of the IP interface.
ADR swL3Ipv6Address	1.3.6.1.4.1.171.11.102.1.2.3.2.1.5.1.2	Ipv6Address	read-only	Specify the IPv6 address.
INT swL3Ipv6AddressCtrlPrefixLen	1.3.6.1.4.1.171.11.102.1.2.3.2.1.5.1.3	INTEGER	read-only	Indicates the prefix length of this IPv6 address.
ROW swL3Ipv6AddressCtrlState	1.3.6.1.4.1.171.11.102.1.2.3.2.1.5.1.8	RowStatus	read-create	This variable displays the status of the entry. The status is used for creating, modifying, and deleting instances of the objects in this table.
INT swL3IpCtrlAllIpIfState	1.3.6.1.4.1.171.11.102.1.2.3.2.1.7	INTEGER	read-write	This object indicates all interface function state of the device.

RFC description

Layer 3 network management MIB for D-Link DGS-3700 switches providing IP, routing, and protocol configuration.

Start monitoring D-Link DGS-3700-12G managed Layer 3 switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DGS-3700-12G-L3MGMT-MIB

What Is DGS-3700-12G-L3MGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description