DNOS-DHCPSERVER-PRIVATE-MIB

All MIBs › DNOS-DHCPSERVER-PRIVATE-MIB

Organization: Dell, Inc.

Last Updated: 2011-01-26

Category: Protocol: DHCP, Vendor: Dell/DNOS

Description: Manages DHCP server pools, lease assignments, and server configuration on Dell DNOS routing platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DNOS-DHCPSERVER-PRIVATE-MIB?

DNOS-DHCPSERVER-PRIVATE-MIB is a Broadcom/Dell private MIB that manages the DHCP server function on Dell DNOS routing platforms, covering DHCP address pools, lease assignments, and server configuration. It exposes configuration data (pool definitions, scope parameters) as well as operational/status data such as current lease assignments. From a monitoring standpoint it supports software service-status checks, letting an administrator confirm the DHCP server process is configured correctly and actively leasing addresses, and spot pool exhaustion which is a common operational fault. It is a Broadcom/Dell-private extension with no stated dependency on standard IETF DHCP MIBs. It is deployed on Dell DNOS switches/routers that provide DHCP services to directly attached client networks. Engineers can download the DNOS-DHCPSERVER-PRIVATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DNOS-DHCPSERVER-PRIVATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell DNOS router/switch

Monitoring Examples

No sample_objects were supplied; based on the description an admin would poll DHCP pool and lease-related objects (a plausible dhcpPoolTable/dhcpLeaseTable) to track how many addresses in a scope are currently leased versus free. Approaching full pool utilization would signal impending address exhaustion requiring a larger scope or additional pool. This is inferred from the short description since no concrete object names were provided.

What Can Be Monitored

DHCP pool configuration
address lease assignments
pool utilization
server configuration state

Imported Objects

From DELL-REF-MIB

dnOS	OBJECT-IDENTITY

From RFC1213-MIB

DisplayString
PhysAddress

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

MacAddress
RowPointer
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using agentDhcpServerAutomaticBindingsNos OID:

Select a Dell Networking OS (DNOS) switch/router (embedded DHCP server) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type agentDhcpServerAutomaticBindingsNos into the Find box to locate it in the OID tree, then select it and click OK. The no. of IP addresses that have been assigned automatically. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
C32 agentDhcpServerACKMessagesSent	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.12	Counter32	read-only	The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server.
TIK agentDhcpServerAddressConflictDetectionTime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3.1.3	TimeTicks	read-only	This specifies the sysUpTime at which the address-conflict was detected.
INT agentDhcpServerAddressConflictDetectionType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3.1.2	INTEGER	read-only	This specifies the address-conflict detection-method.
agentDhcpServerAddressConflictEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3.1		not-accessible	Represents a conflicting-address entry.
agentDhcpServerAddressConflictGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4
IP agentDhcpServerAddressConflictIP	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3.1.1	IpAddress	read-only	This specifies the conflicting IP address assigned to the client by DHCP server.
INT agentDhcpServerAddressConflictLogging	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.2	INTEGER	read-write	It is used to enable, or disables the logging of address-conflicts on a DHCP Server.
ROW agentDhcpServerAddressConflictStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3.1.4	RowStatus	read-write	This specifies the row-status of the conflicting-address entry. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding conflicting-address entry is cleared.
agentDhcpServerAddressConflictTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.3		not-accessible	A table of the conflicting-address entries.
INT agentDhcpServerAdminMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.1	INTEGER	read-write	Admin-mode of the DHCP Server.
C32 agentDhcpServerAutomaticBindingsNosEx	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.3	Counter32	read-only	The no. of IP addresses that have been assigned automatically.
INT agentDhcpServerBootpAutomatic	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.15	INTEGER	read-write	Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools.
INT agentDhcpServerClearAllAddressConflicts	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.4.1	INTEGER	read-write	Clears all the address-conflicts found by DHCP server,when set to enable.
INT agentDhcpServerClearStatistics	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.14	INTEGER	read-write	Clears the DHCP server statistics.
C32 agentDhcpServerDECLINEMessagesReceived	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.8	Counter32	read-only	The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server.
C32 agentDhcpServerDISCOVERMessagesDiscarded	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.16	Counter32	read-only	The number of DHCP DISCOVER messages dropped by the DHCP Server due to the DHCP pool exhaustion or if the maximum number of allocations are done.
C32 agentDhcpServerDISCOVERMessagesReceived	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.6	Counter32	read-only	The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server.
IP agentDhcpServerDynamicPoolIpAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.2	IpAddress	read-write	The IP address of the DHCP Address pool. The IP address must be set before setting the IP Mask or IP Prefix Length. After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
IP agentDhcpServerDynamicPoolIpMask	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.3	IpAddress	read-write	The bit-combination that renders which portion of the address of the DHCP address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'.
U32 agentDhcpServerDynamicPoolIpPrefixLength	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.4	Unsigned32	read-write	This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'mnaual'.
STR agentDhcpServerExcludedAddressRangeCreate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.4	DisplayString	read-write	It sets the IP address-ranges(from low to high) that a DHCP server should not assign to DHCP clients. Each time this MIB object is set successfully, one excluded range of IP address will be set. It is given in format - start and end IP address separated by '-' and terminated by ';'. One example would be - 192.168.36.1-200.1.1.1; . This sets one excluded range of IP address,which starts at 192.168.36.1 and ends at 200.1.1.1. If only start IP address is given, end IP address is assumed to be equal to the start IP address. Get operation on this MIB object returns a null-value, as for the purpose of viewing the exclude-address ranges, the user should perform the traversal of agentDhcpServerExcludedAddressRangeTable. For this reason the get operation on object agentDhcpServerExcludedAddressRangeCreate becomes insignificant.
agentDhcpServerExcludedAddressRangeEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1		not-accessible	Represents entry for a Dhcp server excluded address range table.
ROW agentDhcpServerExcludedAddressRangeStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.4	RowStatus	read-write	This specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted.
agentDhcpServerExcludedAddressRangeTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5		not-accessible	A table of the DHCP Server Pool configuration entries.
IP agentDhcpServerExcludedEndIpAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.3	IpAddress	read-only	This specifies the ending IP address of the excluded address-range.
U32 agentDhcpServerExcludedRangeIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.1	Unsigned32	read-only	This specifies the index of the excluded IP address-range table.
IP agentDhcpServerExcludedStartIpAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.5.1.2	IpAddress	read-only	This specifies the starting IP address of the excluded address-range.
C32 agentDhcpServerExpiredBindingsNos	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.4	Counter32	read-only	The no. of expired leases.
agentDhcpServerGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1
C32 agentDhcpServerINFORMMessagesReceived	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.10	Counter32	read-only	The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server.
INT agentDhcpServerLeaseClearAllBindings	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.1	INTEGER	read-write	Clears All the DHCP server bindings.
agentDhcpServerLeaseEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1		not-accessible	Represents entry for a Dhcp server's leases.
agentDhcpServerLeaseGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3
MAC agentDhcpServerLeaseHWAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.3	MacAddress	read-only	This specifies the hardware address of the client.
IP agentDhcpServerLeaseIPAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.1	IpAddress	read-only	This specifies the IP address leased to the client.
IP agentDhcpServerLeaseIPMask	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.2	IpAddress	read-only	This specifies the IP mask of the address leased to the client.
TIK agentDhcpServerLeaseRemainingTime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.4	TimeTicks	read-only	This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds.
ROW agentDhcpServerLeaseStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.6	RowStatus	read-write	This specifies the row-status of the address-lease. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-lease is cleared.
agentDhcpServerLeaseTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2		not-accessible	A table of the DHCP Server's Lease entries.
INT agentDhcpServerLeaseType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.3.2.1.5	INTEGER	read-only	This specifies the type of address lease as Automatic or Manual.
C32 agentDhcpServerMalformedMessagesReceived	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.5	Counter32	read-only	The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server.
STR agentDhcpServerManualPoolClientHWAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.8	DisplayString	read-write	It specifies the hardware-address of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. After hardware-address, hardware-type will be configured.
INT agentDhcpServerManualPoolClientHWType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.9	INTEGER	read-write	It specifies the hardware-type of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. Before this, hardware-address must be configured.
STR agentDhcpServerManualPoolClientIdentifier	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.6	DisplayString	read-write	It specifies the unique identifier (in colon separated hexadecimal format) of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. To set this object, input should be 7 octets long with the hardware type in the first octet.
STR agentDhcpServerManualPoolClientName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.7	DisplayString	read-write	It specifies the name of a DHCP client. Client name should't include domain-name. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'.
IP agentDhcpServerManualPoolIpAddress	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.10	IpAddress	read-write	The IP address of the DHCP Address pool for manual binding. The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
IP agentDhcpServerManualPoolIpMask	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.11	IpAddress	read-write	The bit-combination that renders which portion of the address of the DHCP address pool for a manual binding refers to the network or subnet and which part refers to the host. The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'.
U32 agentDhcpServerManualPoolIpPrefixLength	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.12	Unsigned32	read-write	This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'dynamic'.
C32 agentDhcpServerNAKMessagesSent	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.13	Counter32	read-only	The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server.
C32 agentDhcpServerOFFERMessagesSent	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.11	Counter32	read-only	The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server.
STR agentDhcpServerOptionPoolName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.3	DisplayString	read-only	The name of the DHCP Address pool. This value cannot be modified
INT agentDhcpServerPingPktNos	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.2	INTEGER	read-write	The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation .
agentDhcpServerPoolAllocationEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1		not-accessible	Represents entry for a Dhcp server's allocation pool.
STR agentDhcpServerPoolAllocationName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.1	DisplayString	read-only	This specifies name of the DHCP Address pool having dynamic binding. This value is same as agentDhcpServerPoolName of the agentDhcpServerPoolConfigTable.
agentDhcpServerPoolAllocationTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3		not-accessible	A table of the DHCP Server's pool entries, showing the binding(dynamic/manual) specific parameters.
INT agentDhcpServerPoolAllocationType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.3.1.5	INTEGER	read-only	This specifies the type of the binding that is associated with this pool.
STR agentDhcpServerPoolBootfile	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.12	DisplayString	read-write	This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name.
agentDhcpServerPoolConfigEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1		not-accessible	Represents entry for a Dhcp server pool.
agentDhcpServerPoolConfigGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2
agentDhcpServerPoolConfigTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2		not-accessible	A table of the DHCP Server Pool configuration entries.
STR agentDhcpServerPoolDefRouter	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.3	DisplayString	read-write	This specifies the default-router list(each default-router is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
STR agentDhcpServerPoolDNSServer	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.4	DisplayString	read-write	This specifies the DNS IP servers(each DNS IP server is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list.
STR agentDhcpServerPoolDomainName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.11	DisplayString	read-write	This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name.
U32 agentDhcpServerPoolIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.1	Unsigned32	read-only	The Pool Index, which 'll be used as index for the PoolConfig Table.
I32 agentDhcpServerPoolLeaseTime	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.5	Integer32	read-write	This specifies the duration of the lease(in minutes) for an IP address that is assigened from a DHCP server to a DHCP client. For infinite leases, lease-time value will be set to 86400.
STR agentDhcpServerPoolName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.2	DisplayString	read-only	The name of the DHCP Address pool. This value cannot be modified
STR agentDhcpServerPoolNameCreate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.1	DisplayString	read-write	A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of agentDhcpServerPoolConfigTable. For this reason the get operation on object agentDhcpServerPoolNameCreate becomes insignificant.
STR agentDhcpServerPoolNetbiosNameServer	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.7	DisplayString	read-write	This specifies the IP address-list of Net BIOS name-servers that are available to DHCP clients (each IP address in this list is separated by comma and the list is terminated by semi-colon), an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list.
INT agentDhcpServerPoolNetbiosNodeType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.8	INTEGER	read-write	This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if node-type is not set to any of the four values.
IP agentDhcpServerPoolNextServer	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.10	IpAddress	read-write	This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address
STR agentDhcpServerPoolOptionAsciiData	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.4	DisplayString	read-write	This specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. If an ascii optiondata is entered again, it gets concatenated with the previous ascii data.
U32 agentDhcpServerPoolOptionCode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.2	Unsigned32	read-write	This specifies the DHCP option code. This alongwith pool-index acts as the index of the DHCP Server Option table.
STR agentDhcpServerPoolOptionCreate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.6	DisplayString	read-write	This sets the option for an existing DHCP Server pool. Here, it is required to enter the pool-index, for which option is to be set and the value of the DHCP option code in string-format : pool-index and option code separated by '-' and terminated by ';', one example would be -> 1-19; , 1 is the pool-index and 19 is the option code.
agentDhcpServerPoolOptionEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1		not-accessible	Represents entry for a Dhcp server option table.
STR agentDhcpServerPoolOptionHexData	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.5	DisplayString	read-write	This specifies semi-colon separated hexadecimal data. Two hexadecimal digits in hexadecimal character string represents one byte . Hexadecimal strings can be entered in the following formats : 1) continuous hexadecimal digits like -- 0123456789abcdef 2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f 3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e 4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865 If a Hex optiondata is entered again, it gets concatenated with the previous Hex data.
U32 agentDhcpServerPoolOptionIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.1	Unsigned32	read-only	The Pool Index alongwith option-code, acts as index for the DHCP Server Option table.
STR agentDhcpServerPoolOptionIpAddressData	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.6	DisplayString	read-write	This specifies the IP-address list(each IP-address is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between). If a IP option is entered again, it gets concatenated with the previous IP data. Maximum no. of IP addresses that can be entered at one time is 8.
ROW agentDhcpServerPoolOptionStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7.1.7	RowStatus	read-write	This specifies the row-status of the DHCP Server Pool option.
agentDhcpServerPoolOptionTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.7		not-accessible	A table for configuring DHCP Server options.
ROW agentDhcpServerPoolRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.13	RowStatus	read-write	The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'agentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted.
IP agentDhcpServerPoolSNTPServer	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.9	IpAddress	read-write	This configures the SNTP server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current SNTP server address
INT agentDhcpServerPoolType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.2.2.1.6	INTEGER	read-only	This specifies the type of the binding that is associated with this pool.
C32 agentDhcpServerRELEASEMessagesReceived	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.9	Counter32	read-only	The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server.
C32 agentDhcpServerREQUESTMessagesReceived	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12.1.7	Counter32	read-only	The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server.
fastPathDHCPServerPrivate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.12			The Broadcom Private MIB for DNOS DHCP Server

RFC description

Dell Networking OS DHCP server private MIB for managing and monitoring DHCP server operations, pool status, and lease statistics.

Start monitoring Dell Networking OS (DNOS) switch/router (embedded DHCP server) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DNOS-DHCPSERVER-PRIVATE-MIB