All MIBs › DLINKPRIME-PACKET-MONITOR-MIB
Organization: D-Link Corp.
Last Updated: 2014-06-03
Category: Traffic Shaping
Description:
On D-Link Prime series switches, tracks sessions used for packet capture and traffic analysis.
Imported Objects
From DLINK-ID-REC-MIB
| dlinkPrimeCommon | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndexOrZero | |
| ifIndex | OBJECT-TYPE |
From Q-BRIDGE-MIB
| PortList | |
| VlanId |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus |
What Is DLINKPRIME-PACKET-MONITOR-MIB?
This D-Link Prime MIB configures port mirroring/traffic monitoring features, specifically Local-SPAN and RSPAN (Remote Switched Port Analyzer) sessions used to duplicate traffic from source ports to a destination port or remote VLAN for analysis by a network analyzer or IDS. No sample object names were captured in this extraction, so specific table/column names cannot be confirmed, but the module's described purpose covers session configuration (source ports, destination port, RSPAN VLAN) and monitoring status. As a traffic-monitoring feature MIB it primarily exposes configuration/operational state of mirroring sessions rather than classic hardware health metrics. It has no described dependency on external standard MIBs beyond general D-Link Prime switch conventions. It is typically deployed when network staff need to capture traffic for troubleshooting or security analysis using an external packet analyzer connected to a SPAN/RSPAN destination port. Engineers can download the DLINKPRIME-PACKET-MONITOR-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DLINKPRIME-PACKET-MONITOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link Prime series managed switch
Monitoring Examples
No sample_objects were supplied for this MIB, so a concrete object-level monitoring scenario cannot be honestly constructed; based on the module description, such a MIB would typically let an admin verify a SPAN/RSPAN session's source ports, destination port, and RSPAN VLAN, but exact object names cannot be confirmed here.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| dlinkPrimePktMonitorMIB | 1.3.6.1.4.1.171.28.10 | This MIB module defines objects for configuring Monitoring Traffic. Acronyms and terminology: SPAN (Switched Port Analyzer): Mirror network traffic for analysis by a network analyzer. Local-SPAN: The SPAN feature is local when the monitored ports are all located on the same switch as the destination port. RSPAN (Remote SPAN): Source ports and destination ports that are distributed across multiple switches, allowing one to monitor any destination port located on the RSPAN VLAN. | ||
| dpPktMonMIBNotifications | 1.3.6.1.4.1.171.28.10.0 | |||
| dpPktMonMIBObjects | 1.3.6.1.4.1.171.28.10.1 | |||
| I32 dpPktMonDstPort | 1.3.6.1.4.1.171.28.10.1.1 | Integer32 | read-write | Specifies the port to which the mirrored traffic in the system is to be copied. |
| INT dpPktMonMirrorType | 1.3.6.1.4.1.171.28.10.1.2 | INTEGER | read-write | Specifies the mirror packet type. |
| POR dpPktMonSrcPort | 1.3.6.1.4.1.171.28.10.1.3 | PortList | read-write | Provides control to enable or disable mirroring over this interface to the destination port. |
| dpPktMonMIBConformance | 1.3.6.1.4.1.171.28.10.2 | |||
| dpPktMonMIBCompliances | 1.3.6.1.4.1.171.28.10.2.1 |
RFC description
Monitors packet capture and traffic analysis sessions on D-Link Prime series switches.
Start monitoring D-Link Prime series managed switch (SPAN/RSPAN port mirroring) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.