DLINK-3100-Tuning

All MIBs › DLINK-3100-Tuning

Organization: Dlink, Inc.

Last Updated: 2009--0-3-

Category: Vendor: D-Link

Description: Provides performance tuning parameters for optimizing forwarding and switching behavior on D-Link 3100 series switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DLINK-3100-Tuning?

DLINK-3100-Tuning is a D-Link, Inc. private extension MIB (under rnd, imported from DLINK-3100-MIB) providing performance-tuning parameters for the D-Link 3100-series router platform's internal forwarding and switching subsystems. It exposes paired current-value/after-reset-value objects for a large set of table-size limits — bridge forwarding, IP and IPX forwarding (FFT) tables at both interface and system scope, ARP, IPX SAP, IP next-hop and ECMP sets, DHCP connections, IGMP/PIM/PIM-SM/DVMRP neighbor and route tables, RMON log and EtherHistory entries, VLAN and GVRP participation, policy-routing rule tables, traceroute control/probe-history entries, and SNMP community entries — plus resource-pool sizing for TCP and RADIUS memory, SSH authorized keys, DNS client cache, and syslog cache/compaction behavior. It also includes a diagnostics table reporting the code, location, and text of recently rejected SNMP requests, an event-message table, and a generic rlTuningParamsTable that summarizes each tunable's current, after-reset, default, minimum, and maximum values by name. Because most limits only take effect after a reboot, the current-vs-after-reset object pairing is central to safely staging capacity changes. It is deployed on D-Link 3100-series routing platforms, and administrators can download the DLINK-3100-Tuning file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DLINK-3100-Tuning. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link 3100-series routing platforms

Monitoring Examples

An operator raises rsMaxIpFrwEntriesAfterReset ahead of a planned capacity increase, then polls rsMaxIpFrwEntries (the current, pre-reboot value) to confirm the change has not yet taken effect and schedules a maintenance-window reboot; if rsMaxIpFrwEntries never converges to the after-reset value following the reboot, rlTuningParamsTable's min/max/default columns for that parameter help confirm whether the requested value was rejected as out of range.

What Can Be Monitored

current vs. after-reset table-size limits (IP/IPX forwarding, ARP, bridge)
IGMP/PIM/DVMRP neighbor and route table limits
rejected SNMP request diagnostics table
resource pool sizing (TCP/RADIUS memory, sockets)
generic tuning-parameter current/default/min/max summary table

Imported Objects

From DLINK-3100-MIB

rnd	MODULE-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
rsTunning	1.3.6.1.4.1.171.10.94.89.89.29			The private MIB module definition for RND device tuning MIB.
INT rsHighPriority	1.3.6.1.4.1.171.10.94.89.89.29.1	INTEGER	read-write	This variable indicates the time interval the forwarding task inside the RS works in High Priority Mode.
INT rsLowPriority	1.3.6.1.4.1.171.10.94.89.89.29.2	INTEGER	read-write	This variable indicates the time interval the forwarding task inside the RS works in Low Priority Mode.
INT rsDbgLevel	1.3.6.1.4.1.171.10.94.89.89.29.3	INTEGER	read-write	This variable indicates the debug level the Router Server works. the range of this variable is 1..100
rsDiagnosticsTable	1.3.6.1.4.1.171.10.94.89.89.29.4		not-accessible	The diagnostics table of the agent
rsDiagnosticsEntry	1.3.6.1.4.1.171.10.94.89.89.29.4.1		not-accessible	The row definition for this table.
INT rsDiagnosticsRequestId	1.3.6.1.4.1.171.10.94.89.89.29.4.1.1	INTEGER	read-only	The request id of the rejected SNMP request whose diagnostics are specified by this entry. If request id 0xFFFFFFFF is given, the diagnostic of the last rejected SNMP request sent by the querying NMS is returned.
INT rsDiagnosticsCode	1.3.6.1.4.1.171.10.94.89.89.29.4.1.2	INTEGER	read-only	The code of the rejected the SNMP request whose diagnostics are specified by this entry. This code may be used to find out the reason for rejection if the diagnostic text is unavailable.
INT rsDiagnosticsLocation	1.3.6.1.4.1.171.10.94.89.89.29.4.1.3	INTEGER	read-only	The internal location in the SW rejecting the SNMP request whose diagnostics are specified by this entry. This information is available for debugging purposes only and will be returned in GET requests only if rsDbgLevel >= 99.
STR rsDiagnosticsText	1.3.6.1.4.1.171.10.94.89.89.29.4.1.4	DisplayString	read-only	The diagnostic text of the rejected SNMP request whose diagnostics are specified by this entry.
INT rsConfirmMessagTab	1.3.6.1.4.1.171.10.94.89.89.29.5	INTEGER	read-write	This variable enables the operator to confirm all the message in the event Message Table.
eventMessageTable	1.3.6.1.4.1.171.10.94.89.89.29.6		not-accessible	The Event Message table of the agent
eventMessageEntry	1.3.6.1.4.1.171.10.94.89.89.29.6.1		not-accessible	The row definition for this table.
INT eventNum	1.3.6.1.4.1.171.10.94.89.89.29.6.1.1	INTEGER	read-only	The event number,the index of this table.
STR eventDesc	1.3.6.1.4.1.171.10.94.89.89.29.6.1.2	DisplayString	read-only	The event discription, this text will include time and severity.
reaTunning	1.3.6.1.4.1.171.10.94.89.89.29.7
INT reaIpForwardEnable	1.3.6.1.4.1.171.10.94.89.89.29.7.4	INTEGER	read-write	The Platform will perform fast IP forwarding if only if this variable's value is enable.
INT reaIpxForwardEnable	1.3.6.1.4.1.171.10.94.89.89.29.7.5	INTEGER	read-write	The Platform will perform fast IPX forwarding if only if this variable's value is enable.
rsMaxEntriesTuning	1.3.6.1.4.1.171.10.94.89.89.29.8
rsMaxBridgeForwardingEntriesTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.1
INT rsMaxBrgFrwEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.1.1	INTEGER	read-only	Maximal number of entries in bridge forwarding table.
INT rsMaxBrgFrwEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.1.2	INTEGER	read-write	Future maximal number of entries in bridge forwarding table.
rsMaxIpForwardingEntriesTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.2
INT rsMaxIpFrwEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.2.1	INTEGER	read-only	Maximal number of entries in Ip forwarding table.
INT rsMaxIpFrwEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.2.2	INTEGER	read-write	Future maximal number of entries in Ip forwarding table.
rsMaxArpEntriesTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.3
INT rsMaxArpEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.3.1	INTEGER	read-only	Maximal number of entries in Arp forwarding table.
INT rsMaxArpEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.3.2	INTEGER	read-write	Future maximal number of entries in Arp forwarding table.
rsMaxIpxForwardingEntriesTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.4
INT rsMaxIpxFrwEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.4.1	INTEGER	read-only	Maximal number of entries in Ipx forwarding table.
INT rsMaxIpxFrwEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.4.2	INTEGER	read-write	Future maximal number of entries in Ipx forwarding table.
rsMaxIpxSapEntriesTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.5
INT rsMaxIpxSapEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.5.1	INTEGER	read-only	Maximal number of entries in IpxSap table.
INT rsMaxIpxSapEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.5.2	INTEGER	read-write	Future maximal number of entries in IpxSap table.
rsMaxDspClntEntriesTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.6
INT rsMaxDspClntEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.6.1	INTEGER	read-only	Maximal number of entries in rsSdClientsTable.
INT rsMaxDspClntEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.6.2	INTEGER	read-write	Future maximal number of entries in rsSdClientsTable.
rsMaxIpFftEntriesTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.9
INT rsMaxIpSFftEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.9.1	INTEGER	read-only	The current maximal size of one IP SFFT Table.
INT rsMaxIpSFftEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.9.2	INTEGER	read-write	The future (after reset) maximal size of one IP SFFT Table.
INT rsMaxIpNFftEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.9.3	INTEGER	read-only	The current maximal size of one IP NFFT Table.
INT rsMaxIpNFftEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.9.4	INTEGER	read-write	The future (after reset) maximal size of one IP NFFT Table.
INT rsMaxIpSFftSysEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.9.5	INTEGER	read-only	The current maximal size of the SYSTEM IP SFFT Table.
INT rsMaxIpSFftSysEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.9.6	INTEGER	read-write	The future (after reset) maximal size of the SYSTEM IP SFFT Table.
INT rsMaxIpNFftSysEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.9.7	INTEGER	read-only	The current maximal size of the SYSTEM IP NFFT Table.
INT rsMaxIpNFftSysEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.9.8	INTEGER	read-write	The future (after reset) maximal size of the SYSTEM IP NFFT Table.
INT rsMaxIpNextHopEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.9.9	INTEGER	read-only	The current maximal size of one IP NextHop Table.
INT rsMaxIpNextHopEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.9.10	INTEGER	read-write	The future (after reset) maximal size of one NextHop Table.
rsMaxIpxFftEntriesTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.10
INT rsMaxIpxSFftEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.10.1	INTEGER	read-only	The current maximal size of one IPX SFFT Table.
INT rsMaxIpxSFftEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.10.2	INTEGER	read-write	The future (after reset) maximal size of one IPX SFFT Table.
INT rsMaxIpxNFftEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.10.3	INTEGER	read-only	The current maximal size of one IPX NFFT Table.
INT rsMaxIpxNFftEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.10.4	INTEGER	read-write	The future (after reset) maximal size of one IPX NFFT Table.
INT rsMaxIpxSFftSysEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.10.5	INTEGER	read-only	The current maximal size of the SYSTEM IPX SFFT Table.
INT rsMaxIpxSFftSysEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.10.6	INTEGER	read-write	The future (after reset) maximal size of the SYSTEM IPX SFFT Table.
INT rsMaxIpxNFftSysEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.10.7	INTEGER	read-only	The current maximal size of the SYSTEM IPX NFFT Table.
INT rsMaxIpxNFftSysEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.10.8	INTEGER	read-write	The future (after reset) maximal size of the SYSTEM IPX NFFT Table.
rsMaxDhcpTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.11
INT rsMaxDhcpConns	1.3.6.1.4.1.171.10.94.89.89.29.8.11.1	INTEGER	read-only	The current maximal number of DHCP connections.
INT rsMaxDhcpConnsAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.11.2	INTEGER	read-write	The future (after reset) maximal number of DHCP connections.
rsMaxIpmTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.12
rsMaxIpmFftEntriesTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.12.1
INT rsMaxIpmFftEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.1.1	INTEGER	read-only	The current maximal number of the IPM FFT Tables.
INT rsMaxIpmFftEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.1.2	INTEGER	read-write	The future (after reset) maximal number of the IPM FFT Tables.
INT rsIpmFftAging	1.3.6.1.4.1.171.10.94.89.89.29.8.12.1.3	INTEGER	read-write	The aging timeout of the IPM FFT Tables.
rsMaxIgmpTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.12.2
INT rsMaxIgmpInterfaceEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.2.1	INTEGER	read-only	Maximal number of entries in the IGMP Neighbor Table.
INT rsMaxIgmpInterfaceEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.2.2	INTEGER	read-write	Future maximal number of entries in the IGMP Neighbor Table.
INT rsMaxIgmpCacheEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.2.3	INTEGER	read-only	Maximal number of entries in the IGMP Cache Table.
INT rsMaxIgmpCacheEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.2.4	INTEGER	read-write	Future maximal number of entries in the IGMP Cache Table.
rsMaxPimTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.12.3
INT rsMaxPimNeighborEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.3.1	INTEGER	read-only	Maximal number of entries in the PIM Neighbor Table.
INT rsMaxPimNeighborEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.3.2	INTEGER	read-write	Future maximal number of entries in the PIM Neighbor Table.
INT rsMaxPimRouteEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.3.3	INTEGER	read-only	Maximal number of entries in the PIM Route Table.
INT rsMaxPimRouteEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.3.4	INTEGER	read-write	Future maximal number of entries in the PIM Route Table.
INT rsMaxPimRouteNextHopEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.3.5	INTEGER	read-only	Maximal number of entries in the PIM Route Next Hop Table.
INT rsMaxPimRouteNextHopEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.3.6	INTEGER	read-write	Future maximal number of entries in the PIM Route Next Hop Table.
INT rsMaxPimInterfaceEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.3.7	INTEGER	read-write	Future maximal number of interfaces in the PIM Interface Table.
INT rsMaxPimInterfaceEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.3.8	INTEGER	read-write	Maximal number of interfaces in the PIM Interface Table.
rsMaxDvmrpTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.12.4
INT rsMaxDvmrpNeighborEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.4.1	INTEGER	read-only	Maximal number of entries in the Dvmrp Neighbor Table.
INT rsMaxDvmrpNeighborEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.4.2	INTEGER	read-write	Future maximal number of entries in the Dvmrp Neighbor Table.
INT rsMaxDvmrpRouteEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.4.3	INTEGER	read-only	Maximal number of entries in the Dvmrp Route Table.
INT rsMaxDvmrpRouteEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.4.4	INTEGER	read-write	Future maximal number of entries in the Dvmrp Route Table.
INT rsMaxDvmrpMRouteEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.4.5	INTEGER	read-only	Maximal number of entries in the Dvmrp Multicast Route Table.
INT rsMaxDvmrpMRouteEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.4.6	INTEGER	read-write	Future maximal number of entries in the Dvmrp Multicast Route Table.
INT rsMaxDvmrpInterfaceEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.4.7	INTEGER	read-write	Maximal number of interfaces in the Dvmrp Interface Table.
INT rsMaxDvmrpInterfaceEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.4.8	INTEGER	read-write	Future maximal number of interfaces in the Dvmrp Interface Table.
rsMaxPigmpTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.12.5
INT rsMaxPigmpRouteEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.5.1	INTEGER	read-only	Maximal number of entries in the IGMP Proxy Routing Table.
INT rsMaxPigmpRouteEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.5.2	INTEGER	read-write	Future maximal number of entries in the IGMP Proxy Routing Table.
rsMaxPimSmTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6
INT rsMaxPimSmNeighborEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.1	INTEGER	read-only	Maximal number of entries in the PIM Neighbor Table.
INT rsMaxPimSmNeighborEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.2	INTEGER	read-write	Future maximal number of entries in the PIM Neighbor Table.
INT rsMaxPimSmRouteEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.3	INTEGER	read-only	Maximal number of entries in the PIM Route Table.
INT rsMaxPimSmRouteEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.4	INTEGER	read-write	Future maximal number of entries in the PIM Route Table.
INT rsMaxPimSmInterfaceEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.5	INTEGER	read-only	Maximal number of entries in the PIM Interface Table.
INT rsMaxPimSmInterfaceEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.6	INTEGER	read-write	Future maximal number of entries in the PIM Interface Table.
INT rsMaxPimSmRPSetEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.7	INTEGER	read-only	Maximal number of entries in the RPSet Table.
INT rsMaxPimSmRPSetEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.8	INTEGER	read-write	Future maximal number of entries in the RPSet Table.
INT rsMaxPimSmCRPEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.9	INTEGER	read-only	Maximal number of entries in the RPSet Table.
INT rsMaxPimSmCRPEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.10	INTEGER	read-write	Future maximal number of entries in the RPSet Table.
INT rsMaxNumberRpAddresesInGroupRange	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.11	INTEGER	read-only	Maximal number of rp addresses per group range in the RPSet Table.
INT rsMaxNumberRpAddresesInGroupRangeAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.12.6.12	INTEGER	read-write	Future maximal number of rp addresses per group range in the RPSet Table.
rsMaxRmonTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.13
INT rsMaxRmonLogEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.13.1	INTEGER	read-only	Maximal number of entries in RMON Log table.
INT rsMaxRmonLogEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.13.2	INTEGER	read-write	Future maximal number of entries in RMON Log table.
INT rsMaxRmonEtherHistoryEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.13.3	INTEGER	read-only	Maximal number of entries in RMON EtherHistory table.
INT rsMaxRmonEtherHistoryEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.13.4	INTEGER	read-write	Future maximal number of entries in RMON EtherHistory table.
rsMaxIgmpSnoopTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.14
INT rsMaxIgmpSnoopGroupEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.14.1	INTEGER	read-only	The maximum number of entries in the IGMP Snooping group table.
INT rsMaxIgmpSnoopGroupEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.14.2	INTEGER	read-write	Future maximal number of entries in the IGMP Snooping group table.
rsMaxVlansTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.15
INT rsMaxVlansEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.15.1	INTEGER	read-only	The maximum number of entries in the VLANs table.
INT rsMaxVlansEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.15.2	INTEGER	read-write	Future maximal number of entries in the VLANs table.
rsMaxPolicyTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.16
INT rsMaxPolicyMaxRulesEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.16.1	INTEGER	read-only	Maximal number of entries in the Policy Route Table.
INT rsMaxPolicyMaxRulesEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.16.2	INTEGER	read-write	Future maximal number of entries in the Policy Route Table.
INT rsMaxPolicySimpleMibMaxRulesEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.16.3	INTEGER	read-only	Maximal number of entries in the Policy SimpleMib Table.
INT rsMaxPolicySimpleMibMaxRulesEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.16.4	INTEGER	read-write	Future maximal number of entries in the Policy SimpleMib Table.
INT rsMaxPolicySimpleMibMaxProfilesEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.16.5	INTEGER	read-only	Maximal number of entries in the profile Policy SimpleMib Table.
INT rsMaxPolicySimpleMibMaxProfilesEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.16.6	INTEGER	read-write	Future maximal number of entries in the profile Policy SimpleMib Table.
rsMaxGvrpVlansTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.17
INT rsMaxGvrpVlans	1.3.6.1.4.1.171.10.94.89.89.29.8.17.1	INTEGER	read-only	The maximum number of VLANs that can participant in Gvrp.
INT rsMaxGvrpVlansAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.17.2	INTEGER	read-write	Future maximal number of VLANs that can participant in Gvrp.
rsMaxTraceRouteTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.18
INT rsMaxTraceRouteControlEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.18.1	INTEGER	read-only	The maximum number of trace route control entries.
INT rsMaxTraceRouteControEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.18.2	INTEGER	read-write	Future maximum number of trace route control entries.
INT rsMaxTraceRouteProbeHistoryEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.18.3	INTEGER	read-only	The maximum number of trace route probe history entries.
INT rsMaxTraceRouteProbeHistoryEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.18.4	INTEGER	read-write	Future maximum number of trace route probe history entries.
rsMaxSnmpTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.19
INT rsMaxSnmpCommunityEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.19.1	INTEGER	read-only	The maximum number of snmpCommunityTable entries.
INT rsMaxSnmpCommunityEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.19.2	INTEGER	read-write	Future maximum number of snmpCommunityTable entries.
rsMaxSocketTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.20
INT rsMaxNumberOfSockets	1.3.6.1.4.1.171.10.94.89.89.29.8.20.1	INTEGER	read-only	Maximal number of sockets.
INT rsMaxNumberOfSocketsAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.20.2	INTEGER	read-write	Future Maximal number of sockets.
INT rsMaxSizeOfSocketDataPool	1.3.6.1.4.1.171.10.94.89.89.29.8.20.3	INTEGER	read-only	Maximal size of socket data pool.
INT rsMaxSizeOfSocketDataPoolAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.20.4	INTEGER	read-write	Future Maximal size of socket data pool.
rsMaxIpRouteTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.21
INT rsMaxIpPrefixes	1.3.6.1.4.1.171.10.94.89.89.29.8.21.1	INTEGER	read-only	Maximal number of IP prefixes that router supports.
INT rsMaxIpPrefixesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.21.2	INTEGER	read-write	FutureMaximal number of IP prefixes that router supports.
rsMaxIpNextHopSetTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.22
INT rsMaxIpNextHopSetEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.22.1	INTEGER	read-only	Maximal number of NextHops that may be used for forwarding for a destinaton.
INT rsMaxIpNextHopSetEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.22.2	INTEGER	read-write	FutureMaximal number of NextHops that may be used for forwarding for a destinaton.
rsMaxIpEcmpTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.23
INT rsMaxIpEcmpEntrySize	1.3.6.1.4.1.171.10.94.89.89.29.8.23.1	INTEGER	read-only	Maximum number of ECMP Sets for forwarding.
INT rsMaxIpEcmpEntrySizeAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.23.2	INTEGER	read-write	FutureMaximum number of ECMP Sets for forwarding.
rsMaxdot1xEapRequestTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.24
INT rsMaxdot1xEapRequestEntries	1.3.6.1.4.1.171.10.94.89.89.29.8.24.1	INTEGER	read-only	The maximum number of eap request packets entries that can be retransmitted.
INT rsMaxdot1xEapRequestEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.24.2	INTEGER	read-write	Future maximum number of eap request packets entries that can be retransmitted.
rsMaxIpInterfaceTuning	1.3.6.1.4.1.171.10.94.89.89.29.8.25
INT rsMaxIpInterfaces	1.3.6.1.4.1.171.10.94.89.89.29.8.25.1	INTEGER	read-only	Maximal number of IP interfaces. Applies to inBand IP interfaces.
INT rsMaxIpInterfacesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.8.25.2	INTEGER	read-write	FutureMaximal number of IP interfaces. Applies to inBand IP interfaces.
rsTcpTuning	1.3.6.1.4.1.171.10.94.89.89.29.11
INT rsTcpMemoryPoolSizeAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.11.1	INTEGER	read-write	The size of the memory pool that the tcp will allocate after reset. The memory pool is used for sending packets
INT rsTcpMemoryPoolSize	1.3.6.1.4.1.171.10.94.89.89.29.11.2	INTEGER	read-only	The size of the memory pool that the tcp uses currently. The memory pool is used for sending packets
rsRadiusTuning	1.3.6.1.4.1.171.10.94.89.89.29.12
INT rsRadiusMemoryPoolSizeAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.12.1	INTEGER	read-write	The size of the memory pool that radius will allocate after reset. The memory pool is used for attributes
INT rsRadiusMemoryPoolSize	1.3.6.1.4.1.171.10.94.89.89.29.12.2	INTEGER	read-only	The size of the memory pool that radius uses currently. The memory pool is used for attributes
rlSyslogTuning	1.3.6.1.4.1.171.10.94.89.89.29.13
U32 rlSyslogFilePercentToDeleteWhenCompacting	1.3.6.1.4.1.171.10.94.89.89.29.13.3	Unsigned32	read-only	When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the current value.
U32 rlSyslogFilePercentToDeleteWhenCompactingAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.13.4	Unsigned32	read-write	When the flash file which is used by reports becomes full, a certain percentage of the old messages on flash are deleted. This is the value after reset.
U32 rlSyslogCacheSize	1.3.6.1.4.1.171.10.94.89.89.29.13.5	Unsigned32	read-only	The size of memory cache of last errors reported. This cache is cyclic. This is the current value.
U32 rlSyslogCacheSizeAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.13.6	Unsigned32	read-write	The size of memory cache of last errors reported. This cache is cyclic. This is the value after reset.
rlMngInfTuning	1.3.6.1.4.1.171.10.94.89.89.29.14
INT rlMaxNumberOfAccessRules	1.3.6.1.4.1.171.10.94.89.89.29.14.1	INTEGER	read-only	The Maximum number of rules per Access List that can be defined
INT rlMaxNumberOfAccessRulesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.14.2	INTEGER	read-write	The Maximum number of rules per Access List for after reset tuning
rlSshTuning	1.3.6.1.4.1.171.10.94.89.89.29.15
INT rlSshMaxAuthorizedKeysAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.15.1	INTEGER	read-write	The maximum amount of authorized user keys the SSH deamon will store after reset.
INT rlSshMaxAuthorizedKeys	1.3.6.1.4.1.171.10.94.89.89.29.15.2	INTEGER	read-only	The maximum amount of authorized user keys the SSH deamon stores currently.
INT rsDiagnosticTextSource	1.3.6.1.4.1.171.10.94.89.89.29.16	INTEGER	read-write	The source from which SNMP diagnostics message texts should be taken.
rsMultiSession	1.3.6.1.4.1.171.10.94.89.89.29.17
INT rsMultiSessionMaxSessionsAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.17.1	INTEGER	read-write	The maximum number of terminal sessions (serial, telnet and ssh) available after reset.
INT rsMultiSessionMaxSessions	1.3.6.1.4.1.171.10.94.89.89.29.17.2	INTEGER	read-only	The maximum number of terminal sessions (serial, telnet and ssh) available.
rlDnsClTuning	1.3.6.1.4.1.171.10.94.89.89.29.18
INT rlMaxDnsClCacheRREntries	1.3.6.1.4.1.171.10.94.89.89.29.18.1	INTEGER	read-only	The current maximal number of DNS client cache entries.
INT rlMaxDnsClCacheRREntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.18.2	INTEGER	read-write	The future (after reset) maximal number of DNS client cache entries.
INT rlMaxDnsClNCacheErrEntries	1.3.6.1.4.1.171.10.94.89.89.29.18.3	INTEGER	read-only	The current maximal number of DNS client negative cache entries.
INT rlMaxDnsClNCacheErrEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.18.4	INTEGER	read-write	The future (after reset) maximal number of DNS client negative cache entries.
INT rlMaxDnsClNamesEntries	1.3.6.1.4.1.171.10.94.89.89.29.18.5	INTEGER	read-only	The current maximal number of DNS client static names entries.
INT rlMaxDnsClNamesEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.18.6	INTEGER	read-write	The future (after reset) maximal number of DNS client static names entries.
rlTuningParamsTable	1.3.6.1.4.1.171.10.94.89.89.29.19		not-accessible	table to show tuning : limits curent and after reset values.
rlTuningParamsEntry	1.3.6.1.4.1.171.10.94.89.89.29.19.1		not-accessible	Defines the contents of each line in the rlTuningParamsTable table.
STR rlTuningParamsName	1.3.6.1.4.1.171.10.94.89.89.29.19.1.1	DisplayString	read-only	Index to the rlTuningParamsTable. name of current value Mib for this entry.
INT rlTuningParamsCurrentValue	1.3.6.1.4.1.171.10.94.89.89.29.19.1.2	INTEGER	read-only	This variable current value used in this run by the system.
INT rlTuningParamsAfterResetValue	1.3.6.1.4.1.171.10.94.89.89.29.19.1.3	INTEGER	read-only	This variable value that will be used in next run by the system. i.e. the value will be effective after next reboot
INT rlTuningParamsDefaultValue	1.3.6.1.4.1.171.10.94.89.89.29.19.1.4	INTEGER	read-only	This variable value that is used by the system as default.
INT rlTuningParamsMinimalValue	1.3.6.1.4.1.171.10.94.89.89.29.19.1.5	INTEGER	read-only	This variable value indicate minimum value. this is the lower limit for editing the value after reset.
INT rlTuningParamsMaximalValue	1.3.6.1.4.1.171.10.94.89.89.29.19.1.6	INTEGER	read-only	This variable value indicate maximum value. This is the upper limit for editing the value after reset.
rlHostParamTable	1.3.6.1.4.1.171.10.94.89.89.29.20		not-accessible	table to show tuning : limits curent and after reset values.
rlHostParamEntry	1.3.6.1.4.1.171.10.94.89.89.29.20.1		not-accessible	Defines the contents of each line in the rlHostParamTable table.
STR rlHostParamName	1.3.6.1.4.1.171.10.94.89.89.29.20.1.1	DisplayString	read-only	Index to the rlHostParamTable. name of current value Mib for this entry.
INT rlHostParamValue	1.3.6.1.4.1.171.10.94.89.89.29.20.1.2	INTEGER	read-only	This variable indicates the current INTEGER value used in this run by the system. Applicable only if rlHostParamType has 'int' value
INT rlHostParamType	1.3.6.1.4.1.171.10.94.89.89.29.20.1.3	INTEGER	read-only	This variable indicates the type of this host parameter. int - the value will be appear in the rlHostParamValue instance of this conceptual row. uint - the value will be appear in the rlHostParamUINT instance of this conceptual row. octetString - the value will be appear in the rlHostParamOctetString instance of this conceptual row. ipV4address - the value will be appear in the rlHostParamIpAddress instance of this conceptual row. ipV6address - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. ipV6zAddress - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. inetAddress - the inet address type will be appear in the rlHostParamUINT instance and inet address itself will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as indicated in INET-ADDRESS-MIB. macAddress - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in SNMPv2-TC. objectIdentifier - the value the value will be appear in the rlHostParamObjectId instance of this conceptual row. displayString - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in SNMPv2-TC. truthValue - the value will be appear in the rlHostParamUINT instance of this conceptual row, to be interpreted as in SNMPv2-TC. portlist - the value will be appear in the rlHostParamOctetString instance of this conceptual row, to be interpreted as in Q-BRIDGE-MIB.
U32 rlHostParamUINT	1.3.6.1.4.1.171.10.94.89.89.29.20.1.4	Unsigned32	read-only	This variable indicates the current UINT value used in this run by the system. Applicable only if rlHostParamType has 'uint', inetAddress or truthValue value
OCT rlHostParamOctetString	1.3.6.1.4.1.171.10.94.89.89.29.20.1.5	OCTET STRING	read-only	This variable indicates the current OCTET STRING value used in this run by the system. Applicable only if rlHostParamType has octetString, ipV6address, ipV6zAddress, inetAddress, macAddress or displayString value
IP rlHostParamIpAddress	1.3.6.1.4.1.171.10.94.89.89.29.20.1.6	IpAddress	read-only	This variable indicates the current IpAddress value used in this run by the system. Applicable only if rlHostParamType has ipV4address value
OID rlHostParamObjectId	1.3.6.1.4.1.171.10.94.89.89.29.20.1.7	OBJECT IDENTIFIER	read-only	This variable indicates the current OBJECT IDENTIFIER value used in this run by the system. Applicable only if rlHostParamType has objectIdentifier value
rlOspfTuning	1.3.6.1.4.1.171.10.94.89.89.29.21
INT rlMaxOspfInterfaces	1.3.6.1.4.1.171.10.94.89.89.29.21.1	INTEGER	read-only	The current maximum number of ospf interfaces.
INT rlMaxOspfInterfacesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.21.2	INTEGER	read-write	The future (after reset) maximum number of ospf interfaces.
INT rlMaxOspfAreas	1.3.6.1.4.1.171.10.94.89.89.29.21.3	INTEGER	read-only	The current maximum number of ospf areas.
INT rlMaxOspfAreasAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.21.4	INTEGER	read-write	The future (after reset) maximum number of ospf areas.
INT rlMaxOspfNeighbors	1.3.6.1.4.1.171.10.94.89.89.29.21.5	INTEGER	read-only	The current maximum number of ospf neighbors.
INT rlMaxOspfNeighborsAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.21.6	INTEGER	read-write	The future (after reset) maximum number of ospf neighbors.
INT rlMaxOspfAbrPerArea	1.3.6.1.4.1.171.10.94.89.89.29.21.7	INTEGER	read-only	The current maximum number of ABR in ospf area.
INT rlMaxOspfAbrPerAreaAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.21.8	INTEGER	read-write	The future (after reset) maximum number of ABR in ospf area.
INT rlMaxOspfNetsInAs	1.3.6.1.4.1.171.10.94.89.89.29.21.9	INTEGER	read-only	The current maximum number of networks in AS.
INT rlMaxOspfNetsInAsAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.21.10	INTEGER	read-write	The future (after reset) maximum number of networks in AS.
rlVlanTuning	1.3.6.1.4.1.171.10.94.89.89.29.22
INT rlVlanDefaultVID	1.3.6.1.4.1.171.10.94.89.89.29.22.1	INTEGER	read-only	The default vlan vid.
INT rlVlanDefaultVIDAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.22.2	INTEGER	read-write	The default vlan vid after rest
rlDependendFeaturesEnableTuning	1.3.6.1.4.1.171.10.94.89.89.29.23
BIT rlDependendFeaturesEnabled	1.3.6.1.4.1.171.10.94.89.89.29.23.1	Bits	read-only	Current set of running features. These features combinations may limit by A. The same resource (such as ASIC module). B. limitation of product or logic for combination System limit is for up to 5 features First implemented with 3.
BIT rlDependendFeaturesEnabledAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.23.2	Bits	read-write	Next system load (after reset) set of running features. These features combinations limited by A. The same resource (such as ASIC module). B. Limitation of product or logic for combination (one feature override the other). C. Per product some or all features status may not be changed. System limit is for up to 5 features First implemented with 3.
rlIpDhcpSnoopingTuning	1.3.6.1.4.1.171.10.94.89.89.29.24
INT rlMaxIpDhcpSnoopingEntries	1.3.6.1.4.1.171.10.94.89.89.29.24.1	INTEGER	read-only	The current maximum number of DHCP snooping entries.
INT rlMaxIpDhcpSnoopingEntriesAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.24.2	INTEGER	read-write	The future (after reset) maximum number of DHCP snooping entries.
rlIscsiSnoopTuning	1.3.6.1.4.1.171.10.94.89.89.29.25
INT rlIscsiSnoopMaxNumOfConnections	1.3.6.1.4.1.171.10.94.89.89.29.25.1	INTEGER	read-only	Defines the presetly effective upper limit of iSCSI connections number the device guarantees to support
INT rlIscsiSnoopMaxNumOfConnectionsAfterReset	1.3.6.1.4.1.171.10.94.89.89.29.25.2	INTEGER	read-write	Defines the upper limit of iSCSI connections number the device will have to support following the looming System reset

RFC description

D-Link 3100 series switch tuning and performance optimization MIB for managing device parameters, configurations, and performance characteristics.

Start monitoring D-Link 3100 series switch (DES/DGS-3100), forwarding/resource table tuning parameters with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DLINK-3100-Tuning

What Is DLINK-3100-Tuning?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description