DLINK-3100-COPY-MIB

All MIBs › DLINK-3100-COPY-MIB

Organization: Dlink, Inc.

Last Updated: 2006-02-02

Category: Vendor: D-Link

Description: D-Link 3100 copy MIB providing objects to initiate and monitor file copy operations for firmware and configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DLINK-3100-COPY-MIB?

This is D-Link's private MIB for the 3100 series switches, providing objects to initiate and track file copy operations such as firmware upgrades and configuration backup/restore. It exposes a table of copy operations, each describing a source and destination location, IP address, unit number, and file name/type. Its monitoring emphasis is on software status: tracking the progress and parameters of an in-flight firmware or configuration copy so an operator can confirm a scheduled upgrade or backup completed as expected rather than stalling or failing partway through. It is a self-contained private MIB with no strong dependency on other standard MIBs, following a common RADLAN-derived pattern also seen across other switch vendors' copy MIBs. It is deployed on D-Link 3100 series switches during firmware upgrade or configuration management operations, typically initiated from network management software after a DLINK-3100-COPY-MIB download has been loaded into the operator's MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DLINK-3100-COPY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link 3100 series switch

Monitoring Examples

An admin initiating a firmware upgrade would create a row in rlCopyTable/rlCopyEntry (indexed by rlCopyIndex), setting rlCopySourceLocation, rlCopySourceIpAddress, rlCopySourceFileName, and rlCopySourceFileType to point at the firmware image, and rlCopyDestinationLocation/rlCopyDestinationIpAddress to specify where it should be applied, with rlCopySourceUnitNumber identifying which stack unit is targeted. Polling this table after initiating the copy lets the admin confirm the operation referenced by rlCopyApplicationId completed rather than stalling, which would indicate a network path or file-availability problem during the upgrade.

What Can Be Monitored

firmware/config copy operation parameters
copy source and destination location
source/destination IP address and file name
target stack unit for copy operation

Imported Objects

From DLINK-3100-DEVICEPARAMS-MIB

rndErrorDesc	OBJECT-TYPE
rndErrorSeverity	OBJECT-TYPE

From DLINK-3100-MIB

rnd	MODULE-IDENTITY
rndNotifications	OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF rlCopyFinished	1.3.6.1.4.1.171.10.94.89.89.0.180			Informational trap indicating that the device has finished a copy operation successfully.
NTF rlCopyFailed	1.3.6.1.4.1.171.10.94.89.89.0.181			Informational trap indicating that the copy operation has failed.
NTF rlCopySWFinished	1.3.6.1.4.1.171.10.94.89.89.0.211			A trap indicating that the device has finished a copy operation of image successfully.
NTF rlCopySWToUnits	1.3.6.1.4.1.171.10.94.89.89.0.212			A trap indicating to master unit that remote units have finished a copy operation of image successfully.
rlCopy	1.3.6.1.4.1.171.10.94.89.89.87			The private MIB module definition for file copy in DLINK-3100 devices.
INT rlCopyMibVersion	1.3.6.1.4.1.171.10.94.89.89.87.1	INTEGER	read-only	Indicates the Copy support version. The current version is 1.
rlCopyTable	1.3.6.1.4.1.171.10.94.89.89.87.2		not-accessible	The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
rlCopyEntry	1.3.6.1.4.1.171.10.94.89.89.87.2.1		not-accessible	An entry (conceptual row) in the CopyTable.
INT rlCopyIndex	1.3.6.1.4.1.171.10.94.89.89.87.2.1.1	INTEGER	read-only	The row index in the table.
RLC rlCopyApplicationId	1.3.6.1.4.1.171.10.94.89.89.87.2.1.2	RlCopyApplicationType	read-only	The applicatione activated this comand
RLC rlCopySourceLocation	1.3.6.1.4.1.171.10.94.89.89.87.2.1.3	RlCopyLocationType	read-write	Source File Location
IP rlCopySourceIpAddress	1.3.6.1.4.1.171.10.94.89.89.87.2.1.4	IpAddress	read-write	The Ip address of the source remote host
INT rlCopySourceUnitNumber	1.3.6.1.4.1.171.10.94.89.89.87.2.1.5	INTEGER	read-write	The unit number of the source unit
STR rlCopySourceFileName	1.3.6.1.4.1.171.10.94.89.89.87.2.1.6	DisplayString	read-write	The name of the source file.
RLC rlCopySourceFileType	1.3.6.1.4.1.171.10.94.89.89.87.2.1.7	RlCopyFileType	read-write	The type of the source file.
RLC rlCopyDestinationLocation	1.3.6.1.4.1.171.10.94.89.89.87.2.1.8	RlCopyLocationType	read-write	Destination File Location
IP rlCopyDestinationIpAddress	1.3.6.1.4.1.171.10.94.89.89.87.2.1.9	IpAddress	read-write	The Ip address of the destination remote host
INT rlCopyDestinationUnitNumber	1.3.6.1.4.1.171.10.94.89.89.87.2.1.10	INTEGER	read-write	The unit number of the destination unit, value 257 means all units
STR rlCopyDestinationFileName	1.3.6.1.4.1.171.10.94.89.89.87.2.1.11	DisplayString	read-write	The name of the destination file.
RLC rlCopyDestinationFileType	1.3.6.1.4.1.171.10.94.89.89.87.2.1.12	RlCopyFileType	read-write	The type of the destination file.
TIK rlCopyUpTime	1.3.6.1.4.1.171.10.94.89.89.87.2.1.13	TimeTicks	read-only	The time elapsed since this entry was created.
INT rlCopyOperationState	1.3.6.1.4.1.171.10.94.89.89.87.2.1.14	INTEGER	read-only	The state of the copy operation.
INT rlCopyBytesTransferred	1.3.6.1.4.1.171.10.94.89.89.87.2.1.15	INTEGER	read-only	The number of bytes that were transferred by the copy operation.
INT rlCopyInBackground	1.3.6.1.4.1.171.10.94.89.89.87.2.1.16	INTEGER	read-write	When enabled the copy operation is done in the background.
ROW rlCopyRowStatus	1.3.6.1.4.1.171.10.94.89.89.87.2.1.17	RowStatus	read-write	It is used to insert or delete an entry
INT rlCopyHistoryIndex	1.3.6.1.4.1.171.10.94.89.89.87.2.1.18	INTEGER	read-write	The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation.
INT rlCopyFreeHistoryIndex	1.3.6.1.4.1.171.10.94.89.89.87.3	INTEGER	read-only	Gives the next free index in the rlCopyHistoryTable (i.e., the next available value for rlCopyHistoryHistoryIndex)
rlCopyHistoryTable	1.3.6.1.4.1.171.10.94.89.89.87.4		not-accessible	The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
rlCopyHistoryEntry	1.3.6.1.4.1.171.10.94.89.89.87.4.1		not-accessible	An entry (conceptual row) in the rlCopyHistoryTable.
INT rlCopyHistoryHistoryIndex	1.3.6.1.4.1.171.10.94.89.89.87.4.1.1	INTEGER	read-only	The row index in the table.
RLC rlCopyHistoryApplicationId	1.3.6.1.4.1.171.10.94.89.89.87.4.1.2	RlCopyApplicationType	read-only	The application that activated this comand
RLC rlCopyHistorySourceLocation	1.3.6.1.4.1.171.10.94.89.89.87.4.1.3	RlCopyLocationType	read-write	Source File Location
IP rlCopyHistorySourceIpAddress	1.3.6.1.4.1.171.10.94.89.89.87.4.1.4	IpAddress	read-write	The IP address of the source remote host
INT rlCopyHistorySourceUnitNumber	1.3.6.1.4.1.171.10.94.89.89.87.4.1.5	INTEGER	read-write	The unit number of the source unit
STR rlCopyHistorySourceFileName	1.3.6.1.4.1.171.10.94.89.89.87.4.1.6	DisplayString	read-write	The name of the source file.
RLC rlCopyHistorySourceFileType	1.3.6.1.4.1.171.10.94.89.89.87.4.1.7	RlCopyFileType	read-write	The type of the source file.
RLC rlCopyHistoryDestinationLocation	1.3.6.1.4.1.171.10.94.89.89.87.4.1.8	RlCopyLocationType	read-write	Destination File Location
IP rlCopyHistoryDestinationIpAddress	1.3.6.1.4.1.171.10.94.89.89.87.4.1.9	IpAddress	read-write	The IP address of the destination remote host
INT rlCopyHistoryDestinationUnitNumber	1.3.6.1.4.1.171.10.94.89.89.87.4.1.10	INTEGER	read-write	The unit number of the destination unit
STR rlCopyHistoryDestinationFileName	1.3.6.1.4.1.171.10.94.89.89.87.4.1.11	DisplayString	read-write	The name of the destination file.
RLC rlCopyHistoryDestinationFileType	1.3.6.1.4.1.171.10.94.89.89.87.4.1.12	RlCopyFileType	read-write	The type of the destination file.
TIK rlCopyHistoryUpTime	1.3.6.1.4.1.171.10.94.89.89.87.4.1.13	TimeTicks	read-only	The time elapsed since this entry was created.
INT rlCopyHistoryOperationState	1.3.6.1.4.1.171.10.94.89.89.87.4.1.14	INTEGER	read-only	The state of the copy operation.
INT rlCopyHistoryBytesTransferred	1.3.6.1.4.1.171.10.94.89.89.87.4.1.15	INTEGER	read-only	The number of bytes that were transferred by the copy operation.
INT rlCopyHistoryInBackground	1.3.6.1.4.1.171.10.94.89.89.87.4.1.16	INTEGER	read-write	When enabled the copy operation is done in the background.
ROW rlCopyHistoryRowStatus	1.3.6.1.4.1.171.10.94.89.89.87.4.1.17	RowStatus	read-write	It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only.
STR rlCopyHistoryErrorMessage	1.3.6.1.4.1.171.10.94.89.89.87.4.1.18	DisplayString	read-only	Error message as a result of failed copy action.
T/F rlCopyAuditingEnable	1.3.6.1.4.1.171.10.94.89.89.87.5	TruthValue	read-write	Controls whether SysLog messages should be issued on file copy events
rlCopyMessagesTable	1.3.6.1.4.1.171.10.94.89.89.87.6		not-accessible	The table listing the messages issued during a COPY operation.
rlCopyMessagesEntry	1.3.6.1.4.1.171.10.94.89.89.87.6.1		not-accessible	An entry (conceptual row) in the rlCopyMessagesTable.
INT rlCopyMessagesCopyIndex	1.3.6.1.4.1.171.10.94.89.89.87.6.1.1	INTEGER	not-accessible	The index of the copy operation whose messages are displayed.
INT rlCopyMessagesMessageIndex	1.3.6.1.4.1.171.10.94.89.89.87.6.1.2	INTEGER	not-accessible	The index of the displayed message.
STR rlCopyMessagesMessageText	1.3.6.1.4.1.171.10.94.89.89.87.6.1.3	DisplayString	read-only	The text of the message occurred in the copy operation.
ROW rlCopyMessagesStatus	1.3.6.1.4.1.171.10.94.89.89.87.6.1.4	RowStatus	read-write	Only destroy is supported.
INT rlCopyMessagesTableRemoveEntries	1.3.6.1.4.1.171.10.94.89.89.87.7	INTEGER	read-write	Setting this object with value n will remove all entries associated with copy operation represented by the value n from the rlCopyMessagesTable, i.e. all the entries with rlCopyMessagesCopyIndex = n.
rlCopyInetTable	1.3.6.1.4.1.171.10.94.89.89.87.8		not-accessible	The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
rlCopyInetEntry	1.3.6.1.4.1.171.10.94.89.89.87.8.1		not-accessible	An entry (conceptual row) in the CopyTable.
INT rlCopyInetIndex	1.3.6.1.4.1.171.10.94.89.89.87.8.1.1	INTEGER	read-only	The row index in the table.
RLC rlCopyInetApplicationId	1.3.6.1.4.1.171.10.94.89.89.87.8.1.2	RlCopyApplicationType	read-only	The applicatione activated this comand
RLC rlCopyInetSourceLocation	1.3.6.1.4.1.171.10.94.89.89.87.8.1.3	RlCopyLocationType	read-write	Source File Location
IPt rlCopyInetSourceIpAddressType	1.3.6.1.4.1.171.10.94.89.89.87.8.1.4	InetAddressType	read-write	The Inet address type of the source remote host
IP rlCopyInetSourceIpAddress	1.3.6.1.4.1.171.10.94.89.89.87.8.1.5	InetAddress	read-write	The Inet address of the source remote host
INT rlCopyInetSourceUnitNumber	1.3.6.1.4.1.171.10.94.89.89.87.8.1.6	INTEGER	read-write	The unit number of the source unit
STR rlCopyInetSourceFileName	1.3.6.1.4.1.171.10.94.89.89.87.8.1.7	DisplayString	read-write	The name of the source file.
RLC rlCopyInetSourceFileType	1.3.6.1.4.1.171.10.94.89.89.87.8.1.8	RlCopyFileType	read-write	The type of the source file.
RLC rlCopyInetDestinationLocation	1.3.6.1.4.1.171.10.94.89.89.87.8.1.9	RlCopyLocationType	read-write	Destination File Location
IPt rlCopyInetDestinationIpAddressType	1.3.6.1.4.1.171.10.94.89.89.87.8.1.10	InetAddressType	read-write	The Inet address type of the destination remote host
IP rlCopyInetDestinationIpAddress	1.3.6.1.4.1.171.10.94.89.89.87.8.1.11	InetAddress	read-write	The Inet address of the destination remote host
INT rlCopyInetDestinationUnitNumber	1.3.6.1.4.1.171.10.94.89.89.87.8.1.12	INTEGER	read-write	The unit number of the destination unit, value 257 means all units
STR rlCopyInetDestinationFileName	1.3.6.1.4.1.171.10.94.89.89.87.8.1.13	DisplayString	read-write	The name of the destination file.
RLC rlCopyInetDestinationFileType	1.3.6.1.4.1.171.10.94.89.89.87.8.1.14	RlCopyFileType	read-write	The type of the destination file.
TIK rlCopyInetUpTime	1.3.6.1.4.1.171.10.94.89.89.87.8.1.15	TimeTicks	read-only	The time elapsed since this entry was created.
INT rlCopyInetOperationState	1.3.6.1.4.1.171.10.94.89.89.87.8.1.16	INTEGER	read-only	The state of the copy operation.
INT rlCopyInetBytesTransferred	1.3.6.1.4.1.171.10.94.89.89.87.8.1.17	INTEGER	read-only	The number of bytes that were transferred by the copy operation.
INT rlCopyInetInBackground	1.3.6.1.4.1.171.10.94.89.89.87.8.1.18	INTEGER	read-write	When enabled the copy operation is done in the background.
ROW rlCopyInetRowStatus	1.3.6.1.4.1.171.10.94.89.89.87.8.1.19	RowStatus	read-write	It is used to insert or delete an entry
INT rlCopyInetHistoryIndex	1.3.6.1.4.1.171.10.94.89.89.87.8.1.20	INTEGER	read-write	The index of the entry corresponding to this one in the rlCopyHistoryTable (equals rlCopyHistoryHistoryIndex). A value of 0 indicates that no history entry should be kept for this copy operation.
rlCopyHistoryInetTable	1.3.6.1.4.1.171.10.94.89.89.87.9		not-accessible	The (conceptual) table listing only one entry at a time with parameters needed for configuration of the file copy action.
rlCopyHistoryInetEntry	1.3.6.1.4.1.171.10.94.89.89.87.9.1		not-accessible	An entry (conceptual row) in the rlCopyHistoryTable.
INT rlCopyHistoryInetHistoryIndex	1.3.6.1.4.1.171.10.94.89.89.87.9.1.1	INTEGER	read-only	The row index in the table.
RLC rlCopyHistoryInetApplicationId	1.3.6.1.4.1.171.10.94.89.89.87.9.1.2	RlCopyApplicationType	read-only	The application that activated this comand
RLC rlCopyHistoryInetSourceLocation	1.3.6.1.4.1.171.10.94.89.89.87.9.1.3	RlCopyLocationType	read-write	Source File Location
IPt rlCopyHistoryInetSourceIpAddressType	1.3.6.1.4.1.171.10.94.89.89.87.9.1.4	InetAddressType	read-write	The Inet address type of the source remote host
IP rlCopyHistoryInetSourceIpAddress	1.3.6.1.4.1.171.10.94.89.89.87.9.1.5	InetAddress	read-write	The Inet address of the source remote host
INT rlCopyHistoryInetSourceUnitNumber	1.3.6.1.4.1.171.10.94.89.89.87.9.1.6	INTEGER	read-write	The unit number of the source unit
STR rlCopyHistoryInetSourceFileName	1.3.6.1.4.1.171.10.94.89.89.87.9.1.7	DisplayString	read-write	The name of the source file.
RLC rlCopyHistoryInetSourceFileType	1.3.6.1.4.1.171.10.94.89.89.87.9.1.8	RlCopyFileType	read-write	The type of the source file.
RLC rlCopyHistoryInetDestinationLocation	1.3.6.1.4.1.171.10.94.89.89.87.9.1.9	RlCopyLocationType	read-write	Destination File Location
IPt rlCopyHistoryInetDestinationIpAddressType	1.3.6.1.4.1.171.10.94.89.89.87.9.1.10	InetAddressType	read-write	The Inet address type of the destination remote host
IP rlCopyHistoryInetDestinationIpAddress	1.3.6.1.4.1.171.10.94.89.89.87.9.1.11	InetAddress	read-write	The Inet address of the destination remote host
INT rlCopyHistoryInetDestinationUnitNumber	1.3.6.1.4.1.171.10.94.89.89.87.9.1.12	INTEGER	read-write	The unit number of the destination unit
STR rlCopyHistoryInetDestinationFileName	1.3.6.1.4.1.171.10.94.89.89.87.9.1.13	DisplayString	read-write	The name of the destination file.
RLC rlCopyHistoryInetDestinationFileType	1.3.6.1.4.1.171.10.94.89.89.87.9.1.14	RlCopyFileType	read-write	The type of the destination file.
TIK rlCopyHistoryInetUpTime	1.3.6.1.4.1.171.10.94.89.89.87.9.1.15	TimeTicks	read-only	The time elapsed since this entry was created.
INT rlCopyHistoryInetOperationState	1.3.6.1.4.1.171.10.94.89.89.87.9.1.16	INTEGER	read-only	The state of the copy operation.
INT rlCopyHistoryInetBytesTransferred	1.3.6.1.4.1.171.10.94.89.89.87.9.1.17	INTEGER	read-only	The number of bytes that were transferred by the copy operation.
INT rlCopyHistoryInetInBackground	1.3.6.1.4.1.171.10.94.89.89.87.9.1.18	INTEGER	read-write	When enabled the copy operation is done in the background.
ROW rlCopyHistoryInetRowStatus	1.3.6.1.4.1.171.10.94.89.89.87.9.1.19	RowStatus	read-write	It is used delete an entry. No other operations are permitted since the history table is populated and updated through the copy table only.
STR rlCopyHistoryInetErrorMessage	1.3.6.1.4.1.171.10.94.89.89.87.9.1.20	DisplayString	read-only	Error message as a result of failed copy action.
INT rlCopyUnitsList	1.3.6.1.4.1.171.10.94.89.89.87.10	INTEGER	accessible-for-notify	Potential list of units used by trap rlCopySWToUnits

RFC description

D-Link vendor-private MIB for the 3100 series switch; defines file copy and configuration management operations.

Start monitoring D-Link 3100 series switch (DES/DGS-3100), firmware/config file copy with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DLINK-3100-COPY-MIB

What Is DLINK-3100-COPY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description