All MIBs › DLINK-3100-BRIDGEMIBOBJECTS-MIB
Organization: Dlink, Inc. Dlink Semiconductor, Inc.
Last Updated: 2007-01-02
Category: Technology: Bridging, Technology: Switching/L2, Vendor: D-Link
Description: D-Link 3100 bridge MIB objects providing management objects extending standard IEEE bridge MIB for D-Link switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DLINK-3100-BRIDGEMIBOBJECTS-MIB?
DLINK-3100-BRIDGEMIBOBJECTS-MIB is a D-Link private MIB that extends standard IEEE bridge management objects for the 3100 series switches, covering per-VLAN spanning tree and priority group configuration. It exposes objects for VLAN-aware spanning tree (dot1s-style) state, priority-to-port-group mapping, and related trap configuration. Its monitoring value lies in confirming the software state of the switch's Layer 2 loop-prevention and QoS priority mechanisms -- whether spanning tree is enabled per VLAN and correctly enforcing port roles, and how priority groups map to ports -- rather than exposing physical hardware sensors. It explicitly extends the standard IEEE 802.1D/802.1Q bridge MIB framework with D-Link-specific per-VLAN STP and priority objects. It is typically deployed in access or distribution-layer D-Link 3100 switches in networks requiring per-VLAN spanning tree and priority-based traffic handling. Engineers can download the DLINK-3100-BRIDGEMIBOBJECTS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DLINK-3100-BRIDGEMIBOBJECTS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link 3100 series managed switch
Monitoring Examples
An administrator would poll rldot1dStpEnable and rldot1dStpType to confirm spanning tree is enabled and which STP variant is running, and check the rldot1dStpVlanTable (rldot1dStpVlanEntry, rldot1dStpVlan) to see which VLANs have their own spanning tree instance, useful for detecting a VLAN that unexpectedly lacks loop protection. rldot1dPriorityPortGroupTable (rldot1dPriorityPortGroupEntry, rldot1dPriorityPortGroupNumber) shows how ports are grouped for priority handling. rldot1dStpTrapVariable indicates what information is included in STP-related trap notifications, useful when troubleshooting an unexpected topology change alert.
What Can Be Monitored
- spanning tree enable state and type
- per-VLAN spanning tree instance mapping
- priority port group assignments
- STP trap variable configuration
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| BridgeId | |
| Timeout | |
| dot1dBasePort | OBJECT-TYPE |
From DLINK-3100-MIB
| rnd | MODULE-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
From Q-BRIDGE-MIB
| PortList |
From RFC1155-SMI
| Counter |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| Counter32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using rldot1dStpTopChanges OID:
Select a D-Link 3100 series switch (DES/DGS-3100), per-VLAN spanning tree/priority as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rldot1dStpTopChanges into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of topology changes detected by this bridge since the management entity was last reset or initialized. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| rlpBridgeMIBObjects | 1.3.6.1.4.1.171.10.94.89.89.57 | This private MIB module defines bridge MIB objects private MIBs. | ||
| rldot1dPriority | 1.3.6.1.4.1.171.10.94.89.89.57.1 | |||
| INT rldot1dPriorityMibVersion | 1.3.6.1.4.1.171.10.94.89.89.57.1.1 | INTEGER | read-only | MIB's version, the current version is 1. |
| rldot1dPriorityPortGroupTable | 1.3.6.1.4.1.171.10.94.89.89.57.1.2 | not-accessible | A list of PortGroupNumber for each port. | |
| rldot1dPriorityPortGroupEntry | 1.3.6.1.4.1.171.10.94.89.89.57.1.2.1 | not-accessible | All ports belonging to a same group have the same User Priority to Traffic Class mapping. | |
| INT rldot1dPriorityPortGroupNumber | 1.3.6.1.4.1.171.10.94.89.89.57.1.2.1.1 | INTEGER | read-only | A group, that port belongs to. All ports belonging to a same group have the same User Priority to Traffic Class mapping. |
| rldot1dStp | 1.3.6.1.4.1.171.10.94.89.89.57.2 | |||
| INT rldot1dStpMibVersion | 1.3.6.1.4.1.171.10.94.89.89.57.2.1 | INTEGER | read-only | MIB's version, the current version is 2. |
| INT rldot1dStpType | 1.3.6.1.4.1.171.10.94.89.89.57.2.2 | INTEGER | read-only | Specifies whether the device supports Spanning Tree per device, or per group. |
| T/F rldot1dStpEnable | 1.3.6.1.4.1.171.10.94.89.89.57.2.3 | TruthValue | read-write | Enable / Disable spanning tree. When working in per vlan mode enable / disable STP per all vlans. |
| T/F rldot1dStpPortMustBelongToVlan | 1.3.6.1.4.1.171.10.94.89.89.57.2.4 | TruthValue | read-write | Specifies whether a port must belong to a VLAN in order to participate in the STP. |
| T/F rldot1dStpExtendedPortNumberFormat | 1.3.6.1.4.1.171.10.94.89.89.57.2.5 | TruthValue | read-write | Specifies whether the STP uses the extended port fnumber format. |
| rldot1dStpVlanTable | 1.3.6.1.4.1.171.10.94.89.89.57.2.6 | not-accessible | A table that contains vlan-specific information for the Spanning Tree Protocol. | |
| rldot1dStpVlanEntry | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1 | not-accessible | A list of information maintained by every Vlan about the Spanning Tree Protocol state for that Vlan. | |
| INT rldot1dStpVlan | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.1 | INTEGER | read-only | The Vlan index. |
| T/F rldot1dStpVlanEnable | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.2 | TruthValue | read-write | Specifies whether this vlan is STP enable or disable |
| TIK rldot1dStpTimeSinceTopologyChange | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.3 | TimeTicks | read-only | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| CTR rldot1dStpTopChangesEx | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.4 | Counter | read-only | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| BRI rldot1dStpDesignatedRoot | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.5 | BridgeId | read-only | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. |
| INT rldot1dStpRootCost | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.6 | INTEGER | read-only | The cost of the path to the root as seen from this bridge. |
| INT rldot1dStpRootPort | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.7 | INTEGER | read-only | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| TIM rldot1dStpMaxAge | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.8 | Timeout | read-only | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
| TIM rldot1dStpHelloTime | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.9 | Timeout | read-only | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
| INT rldot1dStpHoldTime | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.10 | INTEGER | read-only | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. |
| TIM rldot1dStpForwardDelay | 1.3.6.1.4.1.171.10.94.89.89.57.2.6.1.11 | Timeout | read-only | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] |
| rldot1dStpVlanPortTable | 1.3.6.1.4.1.171.10.94.89.89.57.2.7 | not-accessible | A table that contains pair specific information for the Spanning Tree Protocol. | |
| rldot1dStpVlanPortEntry | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1 | not-accessible | A list of information maintained by every pair about the Spanning Tree Protocol state for that pair. | |
| INT rldot1dStpVlanPortVlan | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.1 | INTEGER | read-only | The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information. |
| INT rldot1dStpVlanPortPort | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.2 | INTEGER | read-only | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| INT rldot1dStpVlanPortPriority | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.3 | INTEGER | read-write | The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of rldot1dStpVlanPort. |
| INT rldot1dStpVlanPortState | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.4 | INTEGER | read-only | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1). |
| INT rldot1dStpVlanPortEnable | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.5 | INTEGER | read-write | The enabled/disabled status of the port. |
| INT rldot1dStpVlanPortPathCost | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.6 | INTEGER | read-write | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. |
| BRI rldot1dStpVlanPortDesignatedRoot | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.7 | BridgeId | read-only | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. |
| INT rldot1dStpVlanPortDesignatedCost | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.8 | INTEGER | read-only | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| BRI rldot1dStpVlanPortDesignatedBridge | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.9 | BridgeId | read-only | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| OCT rldot1dStpVlanPortDesignatedPort | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.10 | OCTET STRING | read-only | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| CTR rldot1dStpVlanPortForwardTransitions | 1.3.6.1.4.1.171.10.94.89.89.57.2.7.1.11 | Counter | read-only | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| rldot1dStpTrapVariable | 1.3.6.1.4.1.171.10.94.89.89.57.2.8 | |||
| NUM rldot1dStpTrapVrblifIndex | 1.3.6.1.4.1.171.10.94.89.89.57.2.8.1 | InterfaceIndex | read-only | The ifIndex of port which STP status was changed |
| INT rldot1dStpTrapVrblVID | 1.3.6.1.4.1.171.10.94.89.89.57.2.8.2 | INTEGER | read-only | The VID of VLAN to which the port belongs which STP status was changed |
| INT rldot1dStpTypeAfterReset | 1.3.6.1.4.1.171.10.94.89.89.57.2.9 | INTEGER | read-write | New mode of spaning tree supported by the device after the next reset. |
| INT rldot1dStpMonitorTime | 1.3.6.1.4.1.171.10.94.89.89.57.2.10 | INTEGER | read-write | Factor of hello-time during which a port is monotored to determine if it is stable. |
| INT rldot1dStpBpduCount | 1.3.6.1.4.1.171.10.94.89.89.57.2.11 | INTEGER | read-write | The number of bpdu that need to received for the link to be considered stable. |
| TIK rldot1dStpLastChanged | 1.3.6.1.4.1.171.10.94.89.89.57.2.12 | TimeTicks | read-only | The last time any object in this table was changed by SNMP or other local management means. |
| rldot1dStpPortTable | 1.3.6.1.4.1.171.10.94.89.89.57.2.13 | not-accessible | A table that contains extended pair port specific information. | |
| rldot1dStpPortEntry | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1 | not-accessible | A list of information maintained by every port about the Spanning Tree Protocol state for that port. | |
| INT rldot1dStpPortPort | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.1 | INTEGER | read-only | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| T/F rldot1dStpPortDampEnable | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.2 | TruthValue | read-write | Specified if dampening is enabled on this port. |
| T/F rldot1dStpPortDampStable | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.3 | TruthValue | read-only | Specified if the port is stable. |
| INT rldot1dStpPortFilterBpdu | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.4 | INTEGER | read-write | Specified if this port should filter bpdus when stp is disabled. |
| C32 rldot1dStpPortBpduSent | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.5 | Counter32 | read-only | Specified the number of bpdu sent from this port. |
| C32 rldot1dStpPortBpduReceived | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.6 | Counter32 | read-only | Specified the number of bpdu received in this port. |
| INT rldot1dStpPortRole | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.7 | INTEGER | read-only | Specified the role of this this port. |
| INT rldot1dStpBpduType | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.8 | INTEGER | read-only | Specified the type of BPDU transmitted by this port. |
| T/F rldot1dStpPortRestrictedRole | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.9 | TruthValue | read-write | If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even if it has the best spanning tree priority vector. Such a Port will be selected as an Alternate Port after the Root Port has been selected. |
| T/F rldot1dStpPortAutoEdgePort | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.10 | TruthValue | read-write | If TRUE causes the Port when become up, to enter the blocking state, and if during 3 seconds it doesn't receive a BPDU, it will enter the forwarding state. |
| T/F rldot1dStpPortLoopback | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.11 | TruthValue | read-only | Specified loopback was detected on port. Usable for only a short period of time if stp loopback guard is enabled (since port enters into shutdown state). |
| INT rldot1dStpPortBpduOperStatus | 1.3.6.1.4.1.171.10.94.89.89.57.2.13.1.12 | INTEGER | read-only | Specified BPDU handling operative status for port. |
| T/F rldot1dStpPortsEnable | 1.3.6.1.4.1.171.10.94.89.89.57.2.14 | TruthValue | read-only | Enable / Disable spanning tree on ports by default . |
| T/F rldot1dStpTaggedFlooding | 1.3.6.1.4.1.171.10.94.89.89.57.2.15 | TruthValue | read-only | flooding can be done in tagged bpdu . |
| T/F rldot1dStpPortBelongToVlanDefault | 1.3.6.1.4.1.171.10.94.89.89.57.2.16 | TruthValue | read-only | The default value of rldot1dStpPortMustBelongToVlan . |
| T/F rldot1dStpEnableByDefault | 1.3.6.1.4.1.171.10.94.89.89.57.2.17 | TruthValue | read-only | The default value of rldot1dStpEnable . |
| INT rldot1dStpPortToDefault | 1.3.6.1.4.1.171.10.94.89.89.57.2.18 | INTEGER | read-write | To order port/s to revert to default setings . |
| INT rldot1dStpSupportedType | 1.3.6.1.4.1.171.10.94.89.89.57.2.19 | INTEGER | read-only | The type of stp supported by the device. |
| T/F rldot1dStpEdgeportSupportInStp | 1.3.6.1.4.1.171.10.94.89.89.57.2.20 | TruthValue | read-only | If EdgePort is supported in stpCompatible mode . |
| T/F rldot1dStpFilterBpdu | 1.3.6.1.4.1.171.10.94.89.89.57.2.21 | TruthValue | read-write | Specified if the device should filter BPDUs when STP is disabled. |
| INT rldot1dStpFloodBpduMethod | 1.3.6.1.4.1.171.10.94.89.89.57.2.22 | INTEGER | read-write | Specified flooding method: 1 - classic - untagged to all stp disabled ports 2 - bridging -normal bridging. |
| rldot1dStpSeparatedBridges | 1.3.6.1.4.1.171.10.94.89.89.57.2.23 | |||
| rldot1dStpSeparatedBridgesTable | 1.3.6.1.4.1.171.10.94.89.89.57.2.23.1 | not-accessible | Define if separated bridges feature is enabled for each interface. | |
| rldot1dStpSeparatedBridgesEntry | 1.3.6.1.4.1.171.10.94.89.89.57.2.23.1.1 | not-accessible | Defines the contents of each line in the rlSeparatedBridgesTable table. | |
| T/F rldot1dStpSeparatedBridgesPortEnable | 1.3.6.1.4.1.171.10.94.89.89.57.2.23.1.1.1 | TruthValue | read-write | This variable indicates whether the separated bridge feature is enabled on a specified ifIndex. |
| T/F rldot1dStpSeparatedBridgesEnable | 1.3.6.1.4.1.171.10.94.89.89.57.2.23.2 | TruthValue | read-write | Enable / Disable Separated Bridges Feature. |
| T/F rldot1dStpSeparatedBridgesAutoConfig | 1.3.6.1.4.1.171.10.94.89.89.57.2.23.3 | TruthValue | read-write | Enable / Disable Separated Bridges Automatic Configuration. |
| rldot1dStpPortBpduGuardTable | 1.3.6.1.4.1.171.10.94.89.89.57.2.24 | not-accessible | A table that contains for each port whether it is bpdu guard . | |
| rldot1dStpPortBpduGuardEntry | 1.3.6.1.4.1.171.10.94.89.89.57.2.24.1 | not-accessible | A list of information maintained by every port whether it is bpdu guard. | |
| T/F rldot1dStpPortBpduGuardEnable | 1.3.6.1.4.1.171.10.94.89.89.57.2.24.1.1 | TruthValue | read-write | Specified if bpdu guard is enabled on this port. |
| T/F rldot1dStpLoopbackGuardEnable | 1.3.6.1.4.1.171.10.94.89.89.57.2.25 | TruthValue | read-write | Define if STP loopback guard feature is globally enabled. |
| rldot1dExtBase | 1.3.6.1.4.1.171.10.94.89.89.57.3 | |||
| INT rldot1dExtBaseMibVersion | 1.3.6.1.4.1.171.10.94.89.89.57.3.1 | INTEGER | read-only | MIB's version, the current version is 1. |
| OCT rldot1dDeviceCapabilities | 1.3.6.1.4.1.171.10.94.89.89.57.3.2 | OCTET STRING | read-only | Indicates the optional parts of private extension of IEEE 802.1D and 802.1Q that are implemented by this device and are manageable through this MIB. Capabilities that are allowed on a per-port basis are indicated in dot1dPortCapabilities. |
| rldot1wRStp | 1.3.6.1.4.1.171.10.94.89.89.57.4 | |||
| rldot1wRStpVlanEdgePortTable | 1.3.6.1.4.1.171.10.94.89.89.57.4.1 | not-accessible | A table that contains pair specific information for the Rapid Spanning Tree Protocol. | |
| rldot1wRStpVlanEdgePortEntry | 1.3.6.1.4.1.171.10.94.89.89.57.4.1.1 | not-accessible | A list of information maintained by every pair about the RAPID Spanning Tree Protocol state for that pair. | |
| INT rldot1wRStpVlanEdgePortVlan | 1.3.6.1.4.1.171.10.94.89.89.57.4.1.1.1 | INTEGER | read-only | The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed. |
| INT rldot1wRStpVlanEdgePortPort | 1.3.6.1.4.1.171.10.94.89.89.57.4.1.1.2 | INTEGER | read-only | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| T/F rldot1wRStpEdgePortStatus | 1.3.6.1.4.1.171.10.94.89.89.57.4.1.1.3 | TruthValue | read-write | Specifies whether this port is an Edge Port or not |
| rldot1wRStpForceVersionTable | 1.3.6.1.4.1.171.10.94.89.89.57.4.2 | not-accessible | A table that contains specific information for the Rapid Spanning Tree Protocol. | |
| rldot1wRStpForceVersionEntry | 1.3.6.1.4.1.171.10.94.89.89.57.4.2.1 | not-accessible | A list of information maintained by every about the RAPID Spanning Tree Protocol state for that pair. | |
| INT rldot1wRStpForceVersionVlan | 1.3.6.1.4.1.171.10.94.89.89.57.4.2.1.1 | INTEGER | read-only | The Vlan number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information, If STP per device then only one value of 1 is allowed. If STP per a VLAN then all value of 1..4095 are allowed. |
| INT rldot1wRStpForceVersionState | 1.3.6.1.4.1.171.10.94.89.89.57.4.2.1.2 | INTEGER | read-write | Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP |
| rldot1pPriorityMap | 1.3.6.1.4.1.171.10.94.89.89.57.5 | |||
| INT rldot1pPriorityMapState | 1.3.6.1.4.1.171.10.94.89.89.57.5.1 | INTEGER | read-write | enable / disable |
| rldot1pPriorityMapTable | 1.3.6.1.4.1.171.10.94.89.89.57.5.2 | not-accessible | This table hold information the priority maps | |
| rldot1pPriorityMapEntry | 1.3.6.1.4.1.171.10.94.89.89.57.5.2.1 | not-accessible | The row definition for this table. | |
| STR rldot1pPriorityMapName | 1.3.6.1.4.1.171.10.94.89.89.57.5.2.1.1 | DisplayString | read-only | The map name |
| OCT rldot1pPriorityMapPriority | 1.3.6.1.4.1.171.10.94.89.89.57.5.2.1.2 | OCTET STRING | read-create | The map holding the queue |
| POR rldot1pPriorityMapPort | 1.3.6.1.4.1.171.10.94.89.89.57.5.2.1.3 | PortList | read-create | the port that the map, is applied on in config |
| POR rldot1pPriorityMapPortList | 1.3.6.1.4.1.171.10.94.89.89.57.5.2.1.4 | PortList | read-only | the ports that the map, is applied on in actual |
| ROW rldot1pPriorityMapStatus | 1.3.6.1.4.1.171.10.94.89.89.57.5.2.1.5 | RowStatus | read-create | The status of the table entry. It's used to delete an entry |
| rldot1sMstp | 1.3.6.1.4.1.171.10.94.89.89.57.6 | |||
| rldot1sMstpInstanceTable | 1.3.6.1.4.1.171.10.94.89.89.57.6.1 | not-accessible | A table that contains Mstp instance specific information for the Multiple Spanning Tree Protocol. | |
| rldot1sMstpInstanceEntry | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1 | not-accessible | A list of information maintained by every instance about the multiple Spanning Tree Protocol state for that instance. | |
| INT rldot1sMstpInstanceId | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.1 | INTEGER | read-only | The Instance index. |
| T/F rldot1sMstpInstanceEnable | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.2 | TruthValue | read-only | Specifies whether this Instance is STP enable or disable |
| TIK rldot1sMstpInstanceTimeSinceTopologyChange | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.3 | TimeTicks | read-only | The time (in hundredths of a second) since the last time a topology change was detected by the Mstp Instance . |
| CTR rldot1sMstpInstanceTopChanges | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.4 | Counter | read-only | The total number of topology changes detected by this Instance since the management entity was last reset or initialized. |
| BRI rldot1sMstpInstanceDesignatedRoot | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.5 | BridgeId | read-only | The bridge identifier of the root of the spanning tree as determined by the Muliple Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. |
| INT rldot1sMstpInstanceRootCost | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.6 | INTEGER | read-only | The cost of the path to the root as seen from this bridge. |
| INT rldot1sMstpInstanceRootPort | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.7 | INTEGER | read-only | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| TIM rldot1sMstpInstanceMaxAge | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.8 | Timeout | read-only | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
| TIM rldot1sMstpInstanceHelloTime | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.9 | Timeout | read-only | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
| INT rldot1sMstpInstanceHoldTime | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.10 | INTEGER | read-only | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. |
| TIM rldot1sMstpInstanceForwardDelay | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.11 | Timeout | read-only | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1dStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] |
| INT rldot1sMstpInstancePriority | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.12 | INTEGER | read-write | The value of the write-able portion of the Bridge ID, i.e., the first four bits of the first octet of the (8 octet long) Bridge ID.The value is a product of 4096. The next 12 bit are the msti id . The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress. |
| INT rldot1sMstpInstanceRemainingHopes | 1.3.6.1.4.1.171.10.94.89.89.57.6.1.1.13 | INTEGER | read-only | This count value determines the amount of hopes the information transmited by this bridge on this instance can travel. |
| rldot1sMstpInstancePortTable | 1.3.6.1.4.1.171.10.94.89.89.57.6.2 | not-accessible | A table that contains pair specific information for the Spanning Tree Protocol. | |
| rldot1sMstpInstancePortEntry | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1 | not-accessible | A list of information maintained by every pair about the Spanning Tree Protocol state for that pair. | |
| INT rldot1sMstpInstancePortMstiId | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.1 | INTEGER | read-only | The Vlan group number that the port belongs to, and for which this entry contains Spanning Tree Protocol management information. |
| INT rldot1sMstpInstancePortPort | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.2 | INTEGER | read-only | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| INT rldot1sMstpInstancePortPriority | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.3 | INTEGER | read-write | The value of the priority field which is contained in the more significant 4 bits of the most significant octet of the (2 octet long) Port ID. The value is a product of 16. The other octet of the Port ID is given by the value of rldot1dStpVlanGroupPort. |
| INT rldot1sMstpInstancePortState | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.4 | INTEGER | read-only | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpVlanPortEnable), this object will have a value of disabled(1). |
| INT rldot1sMstpInstancePortEnable | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.5 | INTEGER | read-only | The enabled/disabled status of the port. |
| INT rldot1sMstpInstancePortPathCost | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.6 | INTEGER | read-only | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. |
| BRI rldot1sMstpInstancePortDesignatedRoot | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.7 | BridgeId | read-only | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. |
| INT rldot1sMstpInstancePortDesignatedCost | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.8 | INTEGER | read-only | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| BRI rldot1sMstpInstancePortDesignatedBridge | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.9 | BridgeId | read-only | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| OCT rldot1sMstpInstancePortDesignatedPort | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.10 | OCTET STRING | read-only | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| CTR rldot1sMstpInstancePortForwardTransitions | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.11 | Counter | read-only | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| INT rldot1sMStpInstancePortAdminPathCost | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.12 | INTEGER | read-write | The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost. |
| INT rldot1sMStpInstancePortRole | 1.3.6.1.4.1.171.10.94.89.89.57.6.2.1.13 | INTEGER | read-only | Specify the role of this this port. |
| INT rldot1sMstpMaxHopes | 1.3.6.1.4.1.171.10.94.89.89.57.6.3 | INTEGER | read-write | Max number of hopes that an MST BPDU will travel inside a region. |
| STR rldot1sMstpConfigurationName | 1.3.6.1.4.1.171.10.94.89.89.57.6.4 | SnmpAdminString | read-only | The active configuration name as will be caried in MST BPDU's. |
| INT rldot1sMstpRevisionLevel | 1.3.6.1.4.1.171.10.94.89.89.57.6.5 | INTEGER | read-only | The active revision level. |
| rldot1sMstpVlanTable | 1.3.6.1.4.1.171.10.94.89.89.57.6.6 | not-accessible | A table that contains information about the alocation of vlans to groups. | |
| rldot1sMstpVlanEntry | 1.3.6.1.4.1.171.10.94.89.89.57.6.6.1 | not-accessible | A list of information maintained by every vlan about the group it belongs to. | |
| INT rldot1sMstpVlan | 1.3.6.1.4.1.171.10.94.89.89.57.6.6.1.1 | INTEGER | read-only | The vlan number of the vlan for which this entry contains Spanning Tree Protocol management information. |
| INT rldot1sMstpGroup | 1.3.6.1.4.1.171.10.94.89.89.57.6.6.1.2 | INTEGER | read-only | Specifid the active group number this vlan belonges to. |
| INT rldot1sMstpPendingGroup | 1.3.6.1.4.1.171.10.94.89.89.57.6.6.1.3 | INTEGER | read-write | Specifid the pending group number this vlan belonges to. |
| rldot1sMstpExtPortTable | 1.3.6.1.4.1.171.10.94.89.89.57.6.7 | not-accessible | A table that contains MSTP information about ports of the CIST. | |
| rldot1sMstpExtPortEntry | 1.3.6.1.4.1.171.10.94.89.89.57.6.7.1 | not-accessible | A list of information maintained by every port of the CIST. | |
| INT rldot1sMstpExtPortPort | 1.3.6.1.4.1.171.10.94.89.89.57.6.7.1.1 | INTEGER | read-only | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| INT rldot1sMstpExtPortInternalOperPathCost | 1.3.6.1.4.1.171.10.94.89.89.57.6.7.1.2 | INTEGER | read-only | The contribution of this port to the path cost of paths towards the spanning tree regional root which include this port. 802.1S-2002 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. |
| BRI rldot1sMstpExtPortDesignatedRegionalRoot | 1.3.6.1.4.1.171.10.94.89.89.57.6.7.1.3 | BridgeId | read-only | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. |
| INT rldot1sMstpExtPortDesignatedRegionalCost | 1.3.6.1.4.1.171.10.94.89.89.57.6.7.1.4 | INTEGER | read-only | The regional path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| T/F rldot1sMstpExtPortBoundary | 1.3.6.1.4.1.171.10.94.89.89.57.6.7.1.5 | TruthValue | read-only | Indication if the port is conented to to a lan segment outside or inside the region. |
| INT rldot1sMstpExtPortInternalAdminPathCost | 1.3.6.1.4.1.171.10.94.89.89.57.6.7.1.6 | INTEGER | read-write | The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cost value to the port. If the default Path Cost is being used, this object returns '0' when read. This complements the object dot1dStpPortPathCost, which returns the operational value of the path cost. |
| INT rldot1sMstpDesignatedMaxHopes | 1.3.6.1.4.1.171.10.94.89.89.57.6.8 | INTEGER | read-only | Max number of hopes that an MST BPDU will travel inside a region. |
| BRI rldot1sMstpRegionalRoot | 1.3.6.1.4.1.171.10.94.89.89.57.6.9 | BridgeId | read-only | CIST Regional Root Identifier (13.16.4). The Bridge Identifier of the current CIST Regional Root. |
| INT rldot1sMstpRegionalRootCost | 1.3.6.1.4.1.171.10.94.89.89.57.6.10 | INTEGER | read-only | The CIST path cost from the transmitting Bridge to the CIST Regional Root. |
| STR rldot1sMstpPendingConfigurationName | 1.3.6.1.4.1.171.10.94.89.89.57.6.11 | SnmpAdminString | read-write | The pending configuration name. |
| INT rldot1sMstpPendingRevisionLevel | 1.3.6.1.4.1.171.10.94.89.89.57.6.12 | INTEGER | read-write | The pending revision level. |
| INT rldot1sMstpPendingAction | 1.3.6.1.4.1.171.10.94.89.89.57.6.13 | INTEGER | read-write | The action to be done with the pending configuration. copyPendingActive - to copy the pending mst configuration to the active one. copyActivePending - to copy the active mst configuration to the pending one. |
| INT rldot1sMstpRemainingHops | 1.3.6.1.4.1.171.10.94.89.89.57.6.14 | INTEGER | read-only | This count value determines the amount of hops the information transmitted by this bridge can travel. |
| rldot1dTpAgingTime | 1.3.6.1.4.1.171.10.94.89.89.57.7 | |||
| INT rldot1dTpAgingTimeMin | 1.3.6.1.4.1.171.10.94.89.89.57.7.1 | INTEGER | read-only | The min timeout period in seconds for aging out dynamically learned forwarding information. |
| INT rldot1dTpAgingTimeMax | 1.3.6.1.4.1.171.10.94.89.89.57.7.2 | INTEGER | read-only | The max timeout period in seconds for aging out dynamically learned forwarding information. |
RFC description
Bridge objects including priority mapping and spanning tree protocol for D-Link switches.
Start monitoring D-Link 3100 series switch (DES/DGS-3100), per-VLAN spanning tree/priority with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.