DLINK-3100-BANNER-MIB

All MIBs › DLINK-3100-BANNER-MIB

Organization: Dlink, Inc.

Last Updated: 2008-03-16

Category: Vendor: D-Link

Description: D-Link 3100 banner MIB providing objects to configure login and message-of-the-day banners for device access.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DLINK-3100-BANNER-MIB?

This is a D-Link enterprise MIB for the 3100 series switch that manages login and message-of-the-day banner text displayed during device authentication. It exposes configuration objects for setting banner message content, including support for dynamic tokens like hostname or domain and display formatting instructions such as bold, inverse, or blink, along with settings controlling which connection types (Telnet, SSH, console) display each banner. Its purpose is purely configuration management rather than hardware/software status monitoring, since it governs cosmetic and security-notice text rather than operational device health. It has no apparent dependency on other standard MIBs, being a self-contained vendor configuration extension. It is typically deployed in enterprise environments where organizations need to remotely configure standardized legal or security banners across many D-Link 3100 series switches via SNMP, and administrators can download the DLINK-3100-BANNER-MIB file to load it into their MIB browser before pushing banner updates.

IPNetwork Monitor allows you to monitor SNMP objects defined in DLINK-3100-BANNER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link 3100 series switch

Monitoring Examples

No runtime monitoring data objects were listed in the sample data for this MIB, and given its purpose (banner text configuration), it is primarily a SET-oriented configuration module rather than something polled for status. An administrator would use its objects to push a login banner referencing $(hostname) to all switches simultaneously rather than to detect anomalies through polling.

Imported Objects

From DLINK-3100-MIB

rnd	MODULE-IDENTITY

From P-BRIDGE-MIB

EnabledStatus

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
rlBanner	1.3.6.1.4.1.171.10.94.89.89.133			The private MIB module definition for Banner displays messages in Dlink switching devices. Banner allows users to configure display messages which are displayed on various authentication events. Banner Messages can hold dynamic data such as $(hostname) or $(domain) etc, and display instructions such as: bold, inverse, or blink. Banner Messages can be displayed or hidden with respect to the connection type: via Telnet, SSH or the Console.
rlBannerMessageTable	1.3.6.1.4.1.171.10.94.89.89.133.1		not-accessible	The table listing the Banner content.
rlBannerMessageEntry	1.3.6.1.4.1.171.10.94.89.89.133.1.1		not-accessible	An entry in the rlBannerMessageTable.
BAN rlBannerMessageType	1.3.6.1.4.1.171.10.94.89.89.133.1.1.1	BannerMessageType	not-accessible	This variable identifies the Banner type. There are three types: MOTD, Login and Exec.
INT rlBannerMessageIndex	1.3.6.1.4.1.171.10.94.89.89.133.1.1.2	INTEGER	not-accessible	This variable identifies a Banner string section in the Banner content. The Banner content is limited to 2000 characters. Content is divided into 13 indexed sections. Each section contains 160 octets, except the last used section which can contain less than 160 octets. Once a section of the Banner string contains 160 octets of data, the user can write to the next index. Overwriting is not supported. To delete all Banner content, use the rlBannerMessageClear MIB.
STR rlBannerMessageText	1.3.6.1.4.1.171.10.94.89.89.133.1.1.3	SnmpAdminString	read-write	This variable identifies the MIB which holds a section of the Banner content in the table.
rlBannerManageTable	1.3.6.1.4.1.171.10.94.89.89.133.2		not-accessible	The table listing specifying for each connection type which Banner should, or should not be displayed.
rlBannerManageEntry	1.3.6.1.4.1.171.10.94.89.89.133.2.1		not-accessible	An entry in the rlBannerManageTable.
ENA rlBannerManageSSH	1.3.6.1.4.1.171.10.94.89.89.133.2.1.1	EnabledStatus	read-write	This variable specifies whether the banner type specified in the key should or should not be displayed when a user accesses the device via SSH.
ENA rlBannerManageTelnet	1.3.6.1.4.1.171.10.94.89.89.133.2.1.2	EnabledStatus	read-write	This variable specifies whether the banner type specified in the key should or should not be displayed when a user accesses the device via Telnet.
ENA rlBannerManageConsole	1.3.6.1.4.1.171.10.94.89.89.133.2.1.3	EnabledStatus	read-write	This variable specifies whether the banner type specified in the key should or should not be displayed when a user accesses the device via Console.
BAN rlBannerMessageClear	1.3.6.1.4.1.171.10.94.89.89.133.3	BannerMessageType	read-write	This value, when set, clears the selected Banner type. Clearing the Banner type means that the related entry from rlBannerMessageTable is removed.

RFC description

D-Link banner message configuration for authentication prompts on Telnet, SSH, and console access.

Start monitoring D-Link 3100 series switch (DES/DGS-3100), login banner config with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DLINK-3100-BANNER-MIB

What Is DLINK-3100-BANNER-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description