| OID symbolic | OID numeric | Type | Access | Description |
|---|
| dlgR4ResObj | 1.3.6.1.4.1.3028.2.1.1 | | | |
| dlgR4MibRev | 1.3.6.1.4.1.3028.2.1.1.1 | | | |
| INT dlgR4MibRevMajor | 1.3.6.1.4.1.3028.2.1.1.1.1 | INTEGER | read-only | The Major Revision level.
A change in the major revision level represents a major change
in the architecture of the MIB. A change in the major revision
level may indicate a significant change in the information
supported and/or the meaning of the supported information,
correct interpretation of data may require a MIB document with
the same major revision level. |
| INT dlgR4MibRevMinor | 1.3.6.1.4.1.3028.2.1.1.1.2 | INTEGER | read-only | The Minor Revision level.
A change in the minor revision level may represent some minor
additional support. no changes to any pre-existing information
has occurred. |
| dlgR4DeviceInfo | 1.3.6.1.4.1.3028.2.1.1.2 | | | |
| dlgR4DeviceTable | 1.3.6.1.4.1.3028.2.1.1.2.1 | | not-accessible | Table of Attributes common to all Release 4 style port
level devices. This covers devices like the Voice Channel,
DTI Timeslot, ISDN line device, MSI station set device, etc. |
| dlgR4DeviceEntry | 1.3.6.1.4.1.3028.2.1.1.2.1.1 | | not-accessible | A description of the attributes common to all Release 4
style port level devices. This covers devices like the
Voice Channel, DTI Timeslot, ISDN line device, MSI
station set device, etc. |
| INT dlgR4DeviceIndex | 1.3.6.1.4.1.3028.2.1.1.2.1.1.1 | INTEGER | read-only | A unique value for each Release 4 device contained by the
host. The value for each Release 4 device must remain
constant at least from one re-initialization of the
agent to the next re-initialization. |
| STR dlgR4DeviceName | 1.3.6.1.4.1.3028.2.1.1.2.1.1.2 | DisplayString | read-only | Release 4 Device Name. This is the name the application will
use when opening the device (e.g. dxxxB1C1, dtiB1T1, msiB1C1) |
| INT dlgR4DeviceType | 1.3.6.1.4.1.3028.2.1.1.2.1.1.3 | INTEGER | read-only | An indication of the type of the device.
other(1) - some other type of device unknown to the agent.
voice(2) - A voice channel device. An entry exits in the
dlgR4VoiceTable for this device.
dti(3) - A DTI timeslot device. An entry exits in the
dlgR4DTITable for this device.
isdn(4) - An ISDN B-Channel device. An entry exits in the
dlgR4ISDNTable for this device.
msi(5) - An MSI station set device. An entry exits in the
dlgR4MSITable for this device. |
| INT dlgR4DeviceHiIdentIndex | 1.3.6.1.4.1.3028.2.1.1.2.1.1.4 | INTEGER | read-only | Index into the Hardware information table for the
board to which the Release 4 device is bound to.
This can be used to determine the relationship between
a release 4 device and the hardware platform on which
the corresponding firmware implementing the resource is
resident.
For example, if this value is a 1, then performing a get of
the table entry dlgHiIdentTable columnar objects with index
1 will retrieve the physical hardware identification
information |
| GAU dlgR4DeviceOpenCount | 1.3.6.1.4.1.3028.2.1.1.2.1.1.5 | Gauge | read-only | An indication of how many instances of this device is
currently opened |
| INT dlgR4DeviceXmitCTbusSlot | 1.3.6.1.4.1.3028.2.1.1.2.1.1.6 | INTEGER | read-only | An indication of which timeslot on the CTbus this
device is currently transmitting on. |
| INT dlgR4DeviceRcvrCTbusSlot | 1.3.6.1.4.1.3028.2.1.1.2.1.1.7 | INTEGER | read-only | An indication of which timeslot on the CTbus this
device is currently receiving from (listening to).
A value of -1 indicates this information is not available |
| dlgR4VoiceTable | 1.3.6.1.4.1.3028.2.1.1.2.2 | | not-accessible | Table of Attributes for Release 4 voice channel devices. This
tables 'augments' the R4DeviceTable by sharing a common index |
| dlgR4VoiceEntry | 1.3.6.1.4.1.3028.2.1.1.2.2.1 | | not-accessible | A description of the attributes for Release 4 voice channel
devices. |
| INT dlgR4VoiceChannelIndex | 1.3.6.1.4.1.3028.2.1.1.2.2.1.1 | INTEGER | read-only | A unique value for each Release 4 voice device contained by the
host. This is the same as dlgR4DeviceIndex in the device
table |
| INT dlgR4VoiceChannelStatus | 1.3.6.1.4.1.3028.2.1.1.2.2.1.2 | INTEGER | read-only | Indicates current activity status on the channel:
idle(1) - Channel not active
playing(2) - Playing Audio Data
recording(3) - Recording Audio Data
dialing(4) - Dialing Digits
gettingDigits(5) - Collecting DTMF digits
playTone(6) - Playing a tone
sendingFax(8) - Sending a FAX (VFX boards)
receivingFax(9) - Receiving a FAX (VFX boards)
betweenFAXPages(10) - Between FAX pages (VFX boards)
hookState(11) - Changing hook status to onhook or offhook
winking(12) - Performing a wink
callProgess(13) - Performing Call progress analysis
gettingR2MF(14) - retrieving R2MF digits
blocked(16) - Blocked |
| INT dlgR4VoiceLineStatus | 1.3.6.1.4.1.3028.2.1.1.2.2.1.3 | INTEGER | read-write | Indicates current line status of the channel
unknown(0) - indicates no analog frontend or status unknown
onhook(1) - indicates channel is onhook.
Setting the variable to this value will initiate
putting the channel onhook
offhook(2) - indicates channel is offhook.
Setting the variable to this value initiates
setting the channel offhook.
lcDetected(3)- indicates loop current detected and the channel
is offhook. |
| INT dlgR4VoiceNumberOfDigits | 1.3.6.1.4.1.3028.2.1.1.2.2.1.4 | INTEGER | read-only | Indicates number of uncollected digits in this channel's
digit queue. |
| INT dlgR4VoiceE2PROMFeatures | 1.3.6.1.4.1.3028.2.1.1.2.2.1.5 | INTEGER | read-only | Indicates some static features for this channel enabled
in the E2PROM.
This value is actually a bit mask as follows where a
value of 1 indicates the feature is present:
0x0001 - Not used
0x0002 - Call Progress
0x0004 - MF Digit Detection/Generation
0x0008 - Not used
0x0010 - Not used
0x0020 - Dial Pulse Digit Detection
0x0040 - reserved bit
0x0080 - Echo Cancellation Resource |
| dlgR4DTITable | 1.3.6.1.4.1.3028.2.1.1.2.3 | | not-accessible | Table of Attributes for Release 4 DTI timeslot devices. This
tables 'augments' the R4DeviceTable by sharing a common index |
| dlgR4DTIEntry | 1.3.6.1.4.1.3028.2.1.1.2.3.1 | | not-accessible | A description of the attributes for Release 4 DTI timeslot devices. |
| INT dlgR4DTITimeslotIndex | 1.3.6.1.4.1.3028.2.1.1.2.3.1.1 | INTEGER | read-only | A unique value for each Release 4 DTI device contained by the
host. This is the same as dlgR4DeviceIndex in the device
table |
| STR dlgR4DTIProtocol | 1.3.6.1.4.1.3028.2.1.1.2.3.1.2 | DisplayString | read-only | Indicates active protocol on this timeslot
T-1 - indicates T1 protocol
E-1 - indicates E1 protocol |
| INT dlgR4DTITimeslotStatus | 1.3.6.1.4.1.3028.2.1.1.2.3.1.3 | INTEGER | read-only | Indicates current activity status on the timeslot
idle(0) - no DTI multitasking function active
dialing(1) - Dialing digits using dt_dial() function.
winking(2) - performing a wink using dt_xmitwink() function.
waitingForCall(3) - waiting for a call using dt_mtfcn(..,DEMT_WTCALL ..) |
| INT dlgR4DTIRcvSigBits | 1.3.6.1.4.1.3028.2.1.1.2.3.1.4 | INTEGER | read-only | Indicates current state of the Receive signaling bits
Bit 0 (0x01) - A Receive signaling bit
Bit 1 (0x02) - B Receive signaling bit
Bit 2 (0x04) - C Receive signaling bit
Bit 3 (0x08) - D Receive signaling bit |
| INT dlgR4DTIXmitSigBits | 1.3.6.1.4.1.3028.2.1.1.2.3.1.5 | INTEGER | read-write | Indicates current state of the Transmit signaling bits
Bit 0 (0x01) - A Transmit signaling bit
Bit 1 (0x02) - B Transmit signaling bit
Bit 2 (0x04) - C Transmit signaling bit
Bit 3 (0x08) - D Transmit signaling bit
This variable may also be written to using the following bit mask
values (multiple values may be OR'ed together). In order to leave
a bit unaffected don't specify either the ON or OFF value
0x10 - Turn A Transmit signaling bit off
0x11 - turn A Transmit signaling bit on
0x20 - Turn B Transmit signaling bit off
0x22 - turn B Transmit signaling bit on
0x40 - Turn C Transmit signaling bit off
0x44 - turn C Transmit signaling bit on
0x80 - Turn D Transmit signaling bit off
0x88 - turn D Transmit signaling bit on
As an example to turn the A bit off and the B bit on at the same time
'OR' 0x10 with 0x22 to get 0x32. This will turn A off and B on |
| dlgR4ISDNTable | 1.3.6.1.4.1.3028.2.1.1.2.4 | | not-accessible | Table of Attributes for Release 4 ISDN B-channel devices. This
tables 'augments' the R4DeviceTable by sharing a common index |
| dlgR4ISDNEntry | 1.3.6.1.4.1.3028.2.1.1.2.4.1 | | not-accessible | A description of the attributes for Release 4 ISDN B-channel devices |
| INT dlgR4ISDNBChannelIndex | 1.3.6.1.4.1.3028.2.1.1.2.4.1.1 | INTEGER | read-only | A unique value for each Release 4 ISDN device contained by the
host. This is the same as dlgR4DeviceIndex in the device
table |
| STR dlgR4ISDNProtocol | 1.3.6.1.4.1.3028.2.1.1.2.4.1.2 | DisplayString | read-write | Indicates active protocol on this timeslot |
| INT dlgR4ISDNBChannelStatus | 1.3.6.1.4.1.3028.2.1.1.2.4.1.3 | INTEGER | read-write | Indicates current B Channel status:
inService(0) - B Channel is in service
maintenance(1) - B Channel is in maintenance mode
outOfService(2) - B Channel is out of service
This variable may also be written to. Writing to this variable will fail
if the board is not connected to the Central Office. |
| dlgR4MSITable | 1.3.6.1.4.1.3028.2.1.1.2.5 | | not-accessible | Table of Attributes for Release 4 MSI Station devices. This
tables 'augments' the R4DeviceTable by sharing a common index |
| dlgR4MSIEntry | 1.3.6.1.4.1.3028.2.1.1.2.5.1 | | not-accessible | A description of the attributes for Release 4 MSI Station devices. |
| INT dlgR4MSIStationIndex | 1.3.6.1.4.1.3028.2.1.1.2.5.1.1 | INTEGER | read-only | A unique value for each Release 4 MSI device contained by the
host. This is the same as dlgR4DeviceIndex in the device
table |
| INT dlgR4MSIStationLineStatus | 1.3.6.1.4.1.3028.2.1.1.2.5.1.2 | INTEGER | read-only | Indicates current MSI Station line status
onhook(0) - Station is onhook (agent not connected)
offhook(16) - Station if offhook (agent connected) |
| dlgR4SrlInfo | 1.3.6.1.4.1.3028.2.1.1.3 | | | |
| dlgR4SrlTable | 1.3.6.1.4.1.3028.2.1.1.3.1 | | not-accessible | A Table of attributes related to the Dialogic Standard Runtime Eventing
library. This is the library used by many Dialogic based CT applications
providing an interface for collecting events from the various CT
technologies. Each active process which has the SRL loaded and which have
enabled SRL statistics monitoring will have an entry in this table |
| dlgR4SrlEntry | 1.3.6.1.4.1.3028.2.1.1.3.1.1 | | not-accessible | A description of the attributes related to the Dialogic Standard
Runtime Eventing library. |
| INT dlgR4SrlIndex | 1.3.6.1.4.1.3028.2.1.1.3.1.1.1 | INTEGER | read-only | Index into the table. Each process with a copy of the SRL
DLL loaded will get a unique index |
| STR dlgR4SrlApplicationName | 1.3.6.1.4.1.3028.2.1.1.3.1.1.2 | DisplayString | read-only | Application or Process Name which the SRL DLL is attached |
| CTR dlgR4SrlNumberOfOpens | 1.3.6.1.4.1.3028.2.1.1.3.1.1.3 | Counter | read-only | Total Number of times any Dialogic Release 4 device
was opened by the application using the SRL.
To calculate the number of currently opened devices
subtract the dlgR4SrlNumberOfCloses value from this
value. |
| CTR dlgR4SrlNumberOfCloses | 1.3.6.1.4.1.3028.2.1.1.3.1.1.4 | Counter | read-only | Total Number of times any Dialogic Release 4 device
was closed.
To calculate the number of currently opened devices
subtract this value from the dlgR4SrlNumberOfOpens
value |
| INT dlgR4SrlEventQSize | 1.3.6.1.4.1.3028.2.1.1.3.1.1.5 | INTEGER | read-only | This is the current size of the Dialogic SRL event
Queue |
| GAU dlgR4SrlCurrentEventsOnQ | 1.3.6.1.4.1.3028.2.1.1.3.1.1.6 | Gauge | read-only | This is the number of events that are currently on the
Queue.
If this value keeps growing it indicates that the
application is not properly removing events from the
Queue. This may occur in applications written using the
Synchronous multithreaded programming model |
| GAU dlgR4SrlMaxEventsOnQ | 1.3.6.1.4.1.3028.2.1.1.3.1.1.7 | Gauge | read-only | This is the maximum number of events that was ever
on the queue at a particular instance while the application using the
SRL is running. |
| CTR dlgR4SrlTotalQueuedEvents | 1.3.6.1.4.1.3028.2.1.1.3.1.1.8 | Counter | read-only | This indicates the total number of events queued since
the agents started gathering statistics for this
application |
| GAU dlgR4SrlNumberOfHandlers | 1.3.6.1.4.1.3028.2.1.1.3.1.1.9 | Gauge | read-only | This indicates the number of SRL callback event handlers that are
currently enabled |
