All MIBs › DKSF-70-6-X-X-1 › npCurLoopTrapPower
npCurLoopTrapPower
Module: DKSF-70-6-X-X-1
OID (symbolic): DKSF-70-6-X-X-1::npCurLoopTrapPower
OID (numeric): 1.3.6.1.4.1.25728.8300.2.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Status of loop power 0=Off, 1=On
What is npCurLoopTrapPower?
Carried inside npCurLoopTrap notifications, this reports whether the loop's power was on or off at the moment the trap fired, giving the receiving NMS the power state alongside the current/voltage/resistance readings in the same alert.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.7 snmpwalk -v2c -c public <target> DKSF-70-6-X-X-1::npCurLoopTrapPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.7.1 snmpget -v2c -c public <target> DKSF-70-6-X-X-1::npCurLoopTrapPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8300.2.7.1 i <value>
Start monitoring NetPing DKSF-70 environmental sensing/relay controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-6-X-X-1::npCurLoopTrapPower OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 environmental sensing/relay controller from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.2 | npCurLoopTraps | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.2.7 | npCurLoopTrapPower | DKSF-70-6-X-X-1 |