All MIBs › DKSF-70-4-X-X-1 › npCurLoopTrapPower
npCurLoopTrapPower
Module: DKSF-70-4-X-X-1
OID (symbolic): DKSF-70-4-X-X-1::npCurLoopTrapPower
OID (numeric): 1.3.6.1.4.1.25728.8300.2.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Status of loop power 0=Off, 1=On
What is npCurLoopTrapPower?
Carries the loop's power state, off(0) or on(1), as a variable-binding in the npCurLoopTrap notification, so an admin can see if the alert is simply due to the loop being unpowered. Unlike the writable npCurLoopPower it has no reset option here since the trap is only reporting state, not controlling it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.7 snmpwalk -v2c -c public <target> DKSF-70-4-X-X-1::npCurLoopTrapPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.7.1 snmpget -v2c -c public <target> DKSF-70-4-X-X-1::npCurLoopTrapPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8300.2.7.1 i <value>
Start monitoring NetPing DKSF-70 environmental sensor/relay controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-4-X-X-1::npCurLoopTrapPower OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 environmental sensor/relay controller from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.2 | npCurLoopTraps | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.2.7 | npCurLoopTrapPower | DKSF-70-4-X-X-1 |