All MIBs › DKSF-70-3-X-X-1 › npCurLoopTrapR
npCurLoopTrapR
Module: DKSF-70-3-X-X-1
OID (symbolic): DKSF-70-3-X-X-1::npCurLoopTrapR
OID (numeric): 1.3.6.1.4.1.25728.8300.2.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Resistance of the loop, Ohm
What is npCurLoopTrapR?
This read-only INTEGER (0-99999), carried as varbind data in an npCurLoopTrap notification, reports the loop's resistance in ohms at the moment the trap fired. An admin uses this to help confirm whether an open or shorted sensor circuit caused the alert.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.5 snmpwalk -v2c -c public <target> DKSF-70-3-X-X-1::npCurLoopTrapR
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.5.1 snmpget -v2c -c public <target> DKSF-70-3-X-X-1::npCurLoopTrapR.1
Start monitoring NetPing DKSF-70 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-3-X-X-1::npCurLoopTrapR OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.2 | npCurLoopTraps | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.2.5 | npCurLoopTrapR | DKSF-70-3-X-X-1 |