All MIBs › DKSF-70-3-X-X-1 › npCurLoopTrapPower
npCurLoopTrapPower
Module: DKSF-70-3-X-X-1
OID (symbolic): DKSF-70-3-X-X-1::npCurLoopTrapPower
OID (numeric): 1.3.6.1.4.1.25728.8300.2.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Status of loop power 0=Off, 1=On
What is npCurLoopTrapPower?
This read-write INTEGER, carried as varbind data in an npCurLoopTrap notification, reports the loop's power state, off(0) or on(1), at the moment the trap fired. An admin uses this to check whether the sensor had power at all when its status changed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.7 snmpwalk -v2c -c public <target> DKSF-70-3-X-X-1::npCurLoopTrapPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.7.1 snmpget -v2c -c public <target> DKSF-70-3-X-X-1::npCurLoopTrapPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8300.2.7.1 i <value>
Start monitoring NetPing DKSF-70 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-3-X-X-1::npCurLoopTrapPower OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.2 | npCurLoopTraps | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.2.7 | npCurLoopTrapPower | DKSF-70-3-X-X-1 |