All MIBs › DKSF-60-4-X-X-X › npRelayFlip
npRelayFlip
Module: DKSF-60-4-X-X-X
OID (symbolic): DKSF-60-4-X-X-X::npRelayFlip
OID (numeric): 1.3.6.1.4.1.25728.5500.5.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Write -1 to flip between manual on and manual off states of relay
What is npRelayFlip?
This read-write INTEGER accepts only the value flip(-1) as a command: writing it toggles the relay between manual-on and manual-off, whichever it currently isn't. An admin uses this as a quick one-shot toggle to power-cycle or switch an outlet without first reading its current npRelayState.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.5500.5.1.14 snmpwalk -v2c -c public <target> DKSF-60-4-X-X-X::npRelayFlip
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.5500.5.1.14.1 snmpget -v2c -c public <target> DKSF-60-4-X-X-X::npRelayFlip.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.5500.5.1.14.1 i <value>
Start monitoring NetPing DKSF-60 remote power/relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-60-4-X-X-X::npRelayFlip OID value, configure state conditions and alerts, and monitor any NetPing DKSF-60 remote power/relay control unit from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.5500 | npRelay | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.5500.5 | npRelayTable | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.5500.5.1 | npRelayEntry | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.5500.5.1.14 | npRelayFlip | DKSF-60-4-X-X-X |