All MIBs › DKSF-60-4-X-X-X › npCurLoopTrapR
npCurLoopTrapR
Module: DKSF-60-4-X-X-X
OID (symbolic): DKSF-60-4-X-X-X::npCurLoopTrapR
OID (numeric): 1.3.6.1.4.1.25728.8300.2.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Resistance of the loop, Ohm
What is npCurLoopTrapR?
This read-only INTEGER carries the loop's calculated resistance, in ohms, inside an npCurLoopTrap notification, helping an admin diagnose whether a cut(2) or short(3) alert was caused by a wiring fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.5 snmpwalk -v2c -c public <target> DKSF-60-4-X-X-X::npCurLoopTrapR
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.5.1 snmpget -v2c -c public <target> DKSF-60-4-X-X-X::npCurLoopTrapR.1
Start monitoring NetPing DKSF-60 remote power/relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-60-4-X-X-X::npCurLoopTrapR OID value, configure state conditions and alerts, and monitor any NetPing DKSF-60 remote power/relay control unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.2 | npCurLoopTraps | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.2.5 | npCurLoopTrapR | DKSF-60-4-X-X-X |