All MIBs › DKSF-60-4-X-X-X › npCurLoopTrapPower
npCurLoopTrapPower
Module: DKSF-60-4-X-X-X
OID (symbolic): DKSF-60-4-X-X-X::npCurLoopTrapPower
OID (numeric): 1.3.6.1.4.1.25728.8300.2.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Status of loop power 0=Off, 1=On
What is npCurLoopTrapPower?
This object carries the loop's power state, off(0) or on(1), as part of an npCurLoopTrap notification payload, so an admin reviewing the alert can see whether the affected current loop even had power at the time of the fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.7 snmpwalk -v2c -c public <target> DKSF-60-4-X-X-X::npCurLoopTrapPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.7.1 snmpget -v2c -c public <target> DKSF-60-4-X-X-X::npCurLoopTrapPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8300.2.7.1 i <value>
Start monitoring NetPing DKSF-60 remote power/relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-60-4-X-X-X::npCurLoopTrapPower OID value, configure state conditions and alerts, and monitor any NetPing DKSF-60 remote power/relay control unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.2 | npCurLoopTraps | DKSF-50-11-X-X-X |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300.2.7 | npCurLoopTrapPower | DKSF-60-4-X-X-X |