All MIBs › DKSF-50-11-X-X-X › npCurLoopTrapStatus
npCurLoopTrapStatus
Module: DKSF-50-11-X-X-X
OID (symbolic): DKSF-50-11-X-X-X::npCurLoopTrapStatus
OID (numeric): 1.3.6.1.4.1.25728.8300.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Status of the loop 0=Normal, 1=Alert, 2=Cut, 3=Short, 4=Not Powered
What is npCurLoopTrapStatus?
This is the loop status code (ok/alert/cut/short/notPowered) attached to a npCurLoopTrap notification, showing exactly what fault condition triggered the alert, such as a transition to cut(2) if the sensor cable was disconnected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.2 snmpwalk -v2c -c public <target> DKSF-50-11-X-X-X::npCurLoopTrapStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.2.1 snmpget -v2c -c public <target> DKSF-50-11-X-X-X::npCurLoopTrapStatus.1
Start monitoring Alentis Electronics NetPing remote sensing/control device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-50-11-X-X-X::npCurLoopTrapStatus OID value, configure state conditions and alerts, and monitor any Alentis Electronics NetPing remote sensing/control device from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.2 | npCurLoopTraps | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.2.2 | npCurLoopTrapStatus | DKSF-50-11-X-X-X |