All MIBs › DKSF-50-11-X-X-X › npCurLoopTrapPower
npCurLoopTrapPower
Module: DKSF-50-11-X-X-X
OID (symbolic): DKSF-50-11-X-X-X::npCurLoopTrapPower
OID (numeric): 1.3.6.1.4.1.25728.8300.2.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Status of loop power 0=Off, 1=On
What is npCurLoopTrapPower?
This reports whether loop power was off(0) or on(1) at the moment a npCurLoopTrap notification fired, so the recipient can tell whether the loop lost its status because power was cut versus a genuine sensor fault.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.7 snmpwalk -v2c -c public <target> DKSF-50-11-X-X-X::npCurLoopTrapPower
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8300.2.7.1 snmpget -v2c -c public <target> DKSF-50-11-X-X-X::npCurLoopTrapPower.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8300.2.7.1 i <value>
Start monitoring Alentis Electronics NetPing remote sensing/control device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-50-11-X-X-X::npCurLoopTrapPower OID value, configure state conditions and alerts, and monitor any Alentis Electronics NetPing remote sensing/control device from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8300 | npCurLoop | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.2 | npCurLoopTraps | DKSF-50-11-X-X-X |
| 1.3.6.1.4.1.25728.8300.2.7 | npCurLoopTrapPower | DKSF-50-11-X-X-X |