DELLEMC-OS10-BGP4V2-MIB :: os10bgp4V2PeerKeepAliveConfigured

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDELLEMC-OS10-BGP4V2-MIBos10bgp4V2PeerKeepAliveConfigured

os10bgp4V2PeerKeepAliveConfigured

Module: DELLEMC-OS10-BGP4V2-MIB

OID (symbolic): DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerKeepAliveConfigured

OID (numeric): 1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Time interval (in seconds) for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE messages' frequency relative to the value specified in bgpPeerHoldTimeConfigured; the actual time interval for the KEEPALIVE messages is indicated by bgpPeerKeepAlive.

A reasonable maximum value for this timer would be one third of that of bgpPeerHoldTimeConfigured.

If the value of this object is zero (0), no periodic KEEPALIVE messages are sent to the peer after the BGP connection has been established. The suggested value for this timer is 30 seconds.

What is os10bgp4V2PeerKeepAliveConfigured?

This is the locally configured KeepAlive timer interval in seconds (0, or 1-21845, suggested default 30) for this peer, conventionally set to about a third of the hold time; the actual negotiated interval appears in os10bgp4V2PeerKeepAlive. A value of zero here means no periodic KEEPALIVE messages are sent once the session is established.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.3
snmpwalk -v2c -c public <target> DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerKeepAliveConfigured

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.3.1
snmpget -v2c -c public <target> DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerKeepAliveConfigured.1

Start monitoring Dell EMC switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerKeepAliveConfigured OID value, configure state conditions and alerts, and monitor any Dell EMC switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.11000enterpriseSWDELLEMC-OS10-SMI-MIB
1.3.6.1.4.1.674.11000.5000networkingDELLEMC-OS10-SMI-MIB
1.3.6.1.4.1.674.11000.5000.200os10ExperimentDELLEMC-OS10-SMI-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.11000.5000.200.1os10Bgp4V2MibDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1os10bgp4V2ObjectsDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1.5os10bgp4V2PeerConfiguredTimersTableDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1.5.1os10bgp4V2PeerConfiguredTimersEntryDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.3os10bgp4V2PeerKeepAliveConfiguredDELLEMC-OS10-BGP4V2-MIB