DELLEMC-OS10-BGP4V2-MIB :: os10bgp4V2PeerKeepAlive

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDELLEMC-OS10-BGP4V2-MIBos10bgp4V2PeerKeepAlive

os10bgp4V2PeerKeepAlive

Module: DELLEMC-OS10-BGP4V2-MIB

OID (symbolic): DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerKeepAlive

OID (numeric): 1.3.6.1.4.1.674.11000.5000.200.1.1.6.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared with os10bgp4V2PeerHoldTime, it has the same proportion as what os10bgp4V2PeerKeepAliveConfigured has when compared with os10bgp4V2PeerHoldTimeConfigured. If the value of this object is zero (0), it indicates that the KeepAlive timer has not been established with the peer, or, the value of os10bgp4V2PeerKeepAliveConfigured is zero (0).

If the peer is not in the established state, the value of this object is zero (0).

What is os10bgp4V2PeerKeepAlive?

This is the currently operating KeepAlive timer interval in seconds (0, or 1-21845) for this peer, calculated to keep the same proportion to os10bgp4V2PeerHoldTime as the configured keepalive has to the configured hold time; it reads zero if the peer isn't established or if keepalives are disabled. Admins check this to confirm the actual negotiated keepalive cadence in effect on an active session.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.11000.5000.200.1.1.6.1.2
snmpwalk -v2c -c public <target> DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerKeepAlive

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.11000.5000.200.1.1.6.1.2.1
snmpget -v2c -c public <target> DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerKeepAlive.1

Start monitoring Dell EMC switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerKeepAlive OID value, configure state conditions and alerts, and monitor any Dell EMC switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.11000enterpriseSWDELLEMC-OS10-SMI-MIB
1.3.6.1.4.1.674.11000.5000networkingDELLEMC-OS10-SMI-MIB
1.3.6.1.4.1.674.11000.5000.200os10ExperimentDELLEMC-OS10-SMI-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.11000.5000.200.1os10Bgp4V2MibDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1os10bgp4V2ObjectsDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1.6os10bgp4V2PeerNegotiatedTimersTableDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1.6.1os10bgp4V2PeerNegotiatedTimersEntryDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1.6.1.2os10bgp4V2PeerKeepAliveDELLEMC-OS10-BGP4V2-MIB