DELLEMC-OS10-BGP4V2-MIB :: os10bgp4V2PeerHoldTimeConfigured

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDELLEMC-OS10-BGP4V2-MIBos10bgp4V2PeerHoldTimeConfigured

os10bgp4V2PeerHoldTimeConfigured

Module: DELLEMC-OS10-BGP4V2-MIB

OID (symbolic): DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerHoldTimeConfigured

OID (numeric): 1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: Time interval (in seconds) for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker, using the smaller of the values in bgpPeerHoldTimeConfigured and the Hold Time received in the OPEN message.

This value must be at least three seconds if it is not zero (0).

If the Hold Timer has not been established with the peer this object MUST have a value of zero (0).

If the bgpPeerHoldTimeConfigured object has a value of (0), then this object MUST have a value of (0).

What is os10bgp4V2PeerHoldTimeConfigured?

This is the locally configured Hold Timer value in seconds (0, or 3-65535) for this peer, before negotiation; the actual operating value (the smaller of this and the peer's advertised Hold Time) appears in os10bgp4V2PeerHoldTime. Admins raise or lower this to control how quickly a session is declared dead after missed keepalives, with zero meaning no hold timer is used.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.2
snmpwalk -v2c -c public <target> DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerHoldTimeConfigured

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.2.1
snmpget -v2c -c public <target> DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerHoldTimeConfigured.1

Start monitoring Dell EMC switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELLEMC-OS10-BGP4V2-MIB::os10bgp4V2PeerHoldTimeConfigured OID value, configure state conditions and alerts, and monitor any Dell EMC switches from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.11000enterpriseSWDELLEMC-OS10-SMI-MIB
1.3.6.1.4.1.674.11000.5000networkingDELLEMC-OS10-SMI-MIB
1.3.6.1.4.1.674.11000.5000.200os10ExperimentDELLEMC-OS10-SMI-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.11000.5000.200.1os10Bgp4V2MibDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1os10bgp4V2ObjectsDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1.5os10bgp4V2PeerConfiguredTimersTableDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1.5.1os10bgp4V2PeerConfiguredTimersEntryDELLEMC-OS10-BGP4V2-MIB
1.3.6.1.4.1.674.11000.5000.200.1.1.5.1.2os10bgp4V2PeerHoldTimeConfiguredDELLEMC-OS10-BGP4V2-MIB