All MIBs › DELL-NETWORKING-ISIS-MIB › dellNetIsisSysOloadV6SetOloadOnStartupUntil
dellNetIsisSysOloadV6SetOloadOnStartupUntil
Module: DELL-NETWORKING-ISIS-MIB
OID (symbolic): DELL-NETWORKING-ISIS-MIB::dellNetIsisSysOloadV6SetOloadOnStartupUntil
OID (numeric): 1.3.6.1.4.1.6027.3.18.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: If this object is within the range of 5 to 86400, the overload bit is set for both levels for IPV6 when isis is enabled for next startup. The overload bit remains set for seconds.dellNetIsisSysOloadV6SetOloadOnStartupUntil. When dellNetIsisSysOloadV6SetOloadOnStartupUntil seconds have elapsed, the overload flag remains set if the implementation has run out of memory. Else, the system clears the overload bit. A value of zero removes the config so that it will not be effected in the next startup.
What is dellNetIsisSysOloadV6SetOloadOnStartupUntil?
When set to a value from 5 to 86400, this object makes IS-IS set the IPv6 overload bit for both levels for that many seconds after IS-IS is enabled at the next startup, with the flag staying set longer only if the router has actually run out of memory; a value of zero removes the startup configuration. Admins use it to give the IPv6 topology time to reconverge before the router accepts IPv6 transit traffic after a reboot. Setting it to 90 would keep the IPv6 overload bit set for a minute and a half following the next IS-IS startup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.18.1.5 snmpwalk -v2c -c public <target> DELL-NETWORKING-ISIS-MIB::dellNetIsisSysOloadV6SetOloadOnStartupUntil
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.18.1.5.1 snmpget -v2c -c public <target> DELL-NETWORKING-ISIS-MIB::dellNetIsisSysOloadV6SetOloadOnStartupUntil.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6027.3.18.1.5.1 i <value>
Start monitoring Dell Networking OS switch/router (IS-IS routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELL-NETWORKING-ISIS-MIB::dellNetIsisSysOloadV6SetOloadOnStartupUntil OID value, configure state conditions and alerts, and monitor any Dell Networking OS switch/router (IS-IS routing) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6027 | dellNet | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3 | dellNetMgmt | DELL-NETWORKING-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6027.3.18 | dellNetIsisMib | DELL-NETWORKING-ISIS-MIB |
| 1.3.6.1.4.1.6027.3.18.1 | dellNetIsisObjects | DELL-NETWORKING-ISIS-MIB |
| 1.3.6.1.4.1.6027.3.18.1.5 | dellNetIsisSysOloadV6SetOloadOnStartupUntil | DELL-NETWORKING-ISIS-MIB |