All MIBs › DELL-NETWORKING-ISIS-MIB › dellNetIsisSysOloadSetOloadOnStartupUntil
dellNetIsisSysOloadSetOloadOnStartupUntil
Module: DELL-NETWORKING-ISIS-MIB
OID (symbolic): DELL-NETWORKING-ISIS-MIB::dellNetIsisSysOloadSetOloadOnStartupUntil
OID (numeric): 1.3.6.1.4.1.6027.3.18.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: If this object is within the range of 5 to 86400, the overload bit is set for both levels when isis is enabled for next startup. The overload bit remains set for seconds.dellNetIsisSysOloadSetOloadOnStartupUntil. When dellNetIsisSysOloadSetOloadOnStartupUntil seconds have elapsed,the overload flag remains set if the implementation has run out of memory. Else, the system clears the overload bit. In addition to the value limits, a value of zero removes the config so that it will not be effected in the next startup.
What is dellNetIsisSysOloadSetOloadOnStartupUntil?
When set to a value from 5 to 86400, this object makes IS-IS set the overload bit for both levels for that many seconds after IS-IS is enabled at the next startup, unless the router genuinely runs low on memory in which case the bit stays set. A value of zero removes this startup-overload configuration entirely so it won't apply on the next boot. An admin might set this to 120 so a rebooting router advertises itself as overloaded for two minutes while its routing table reconverges before it starts carrying transit traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.3.18.1.2 snmpwalk -v2c -c public <target> DELL-NETWORKING-ISIS-MIB::dellNetIsisSysOloadSetOloadOnStartupUntil
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.3.18.1.2.1 snmpget -v2c -c public <target> DELL-NETWORKING-ISIS-MIB::dellNetIsisSysOloadSetOloadOnStartupUntil.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6027.3.18.1.2.1 i <value>
Start monitoring Dell Networking OS switch/router (IS-IS routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELL-NETWORKING-ISIS-MIB::dellNetIsisSysOloadSetOloadOnStartupUntil OID value, configure state conditions and alerts, and monitor any Dell Networking OS switch/router (IS-IS routing) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6027 | dellNet | DELL-NETWORKING-SMI |
| 1.3.6.1.4.1.6027.3 | dellNetMgmt | DELL-NETWORKING-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6027.3.18 | dellNetIsisMib | DELL-NETWORKING-ISIS-MIB |
| 1.3.6.1.4.1.6027.3.18.1 | dellNetIsisObjects | DELL-NETWORKING-ISIS-MIB |
| 1.3.6.1.4.1.6027.3.18.1.2 | dellNetIsisSysOloadSetOloadOnStartupUntil | DELL-NETWORKING-ISIS-MIB |