DELL-NETWORKING-BGP4-V2-MIB :: dellNetBgpM2PathAttrNextHop

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › DELL-NETWORKING-BGP4-V2-MIB › dellNetBgpM2PathAttrNextHop

dellNetBgpM2PathAttrNextHop

Module: DELL-NETWORKING-BGP4-V2-MIB

OID (symbolic): DELL-NETWORKING-BGP4-V2-MIB::dellNetBgpM2PathAttrNextHop

OID (numeric): 1.3.6.1.4.1.6027.20.1.3.4.1.3

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-only

Description: The address of the border router that should be used to access the destination network. This address is the nexthop address received in the UPDATE packet. The address family of this object will be the same as that of the prefix in this row.

Note that for RFC2545 style double nexthops, this object will always contain the global scope nexthop. dellNetBgpM2LinkLocalNextHopTable will contain the linklocal scope nexthop.

In the case that the mechanism documented in draft-kato-bgp-ipv6-link-local-00.txt is used and only a link local nexthop has been sent, , dellNetBgpM2LinkLocalNextHopPresent will be false and dellNetBgpM2PathAttrNextHop will contain the link local nexthop.

What is dellNetBgpM2PathAttrNextHop?

The next-hop IP address received in the route's UPDATE message, i.e. the router traffic to this destination should be forwarded through; for RFC 2545 dual-nexthop IPv6 routes this always holds the global-scope address, with any link-local next hop tracked separately via dellNetBgpM2LinkLocalNextHop.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6027.20.1.3.4.1.3
snmpwalk -v2c -c public <target> DELL-NETWORKING-BGP4-V2-MIB::dellNetBgpM2PathAttrNextHop

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6027.20.1.3.4.1.3.1
snmpget -v2c -c public <target> DELL-NETWORKING-BGP4-V2-MIB::dellNetBgpM2PathAttrNextHop.1

Start monitoring Dell Networking switch/router (BGP4) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DELL-NETWORKING-BGP4-V2-MIB::dellNetBgpM2PathAttrNextHop OID value, configure state conditions and alerts, and monitor any Dell Networking switch/router (BGP4) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6027dellNetDELL-NETWORKING-SMI
1.3.6.1.4.1.6027.20dellNetExperimentDELL-NETWORKING-SMI
Numeric OIDNameModule
1.3.6.1.4.1.6027.20.1dellNetBgpM2DELL-NETWORKING-BGP4-V2-MIB
1.3.6.1.4.1.6027.20.1.3dellNetBgpM2RibDELL-NETWORKING-BGP4-V2-MIB
1.3.6.1.4.1.6027.20.1.3.4dellNetBgpM2PathAttrTableDELL-NETWORKING-BGP4-V2-MIB
1.3.6.1.4.1.6027.20.1.3.4.1dellNetBgpM2PathAttrEntryDELL-NETWORKING-BGP4-V2-MIB
1.3.6.1.4.1.6027.20.1.3.4.1.3dellNetBgpM2PathAttrNextHopDELL-NETWORKING-BGP4-V2-MIB