DECnet-iv :: phivRouteType

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DECnet-iv › phivRouteType

phivRouteType

Module: DECnet-iv

OID (symbolic): DECnet-iv::phivRouteType

OID (numeric): 1.3.6.1.2.1.18.5.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This parameter indicates the type of the executor node. The node-type is one of the following:

routing-III nonrouting-III routing-IV ronrouting-IV area

A routing node has full routing capability. A nonrouting node contains a subset of the Routing routing modules. The III and IV indicate the DNA phase of the node. Nonrouting nodes can deliver and receive packets to and from any node, but cannot route packets from other nodes through to other nodes. An area node routes between areas. Refer to the Routing specification for details.

For adjacent nodes, this is a read-only parameter that indicates the type of the reachable adjacent node. NOTE: The ROUTING-III and NONROUTING-III values are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155)

What is phivRouteType?

Reports this node's DECnet routing role: a full routing node, a non-routing (end) node, in either Phase III or Phase IV, or an area node that routes between areas. For an adjacent node's table entry this instead reports that neighbor's role, letting an admin confirm whether a given neighbor can actually forward transit traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.5.14
snmpwalk -v2c -c public <target> DECnet-iv::phivRouteType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.18.5.14.1
snmpget -v2c -c public <target> DECnet-iv::phivRouteType.1

Start monitoring DEC/Compaq/HP VAX or Alpha system / DECnet-capable router (DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECnet-iv::phivRouteType OID value, configure state conditions and alerts, and monitor any DEC/Compaq/HP VAX or Alpha system / DECnet-capable router (DECnet Phase IV) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.18phivDECnet-iv
1.3.6.1.2.1.18.5routingDECnet-iv
1.3.6.1.2.1.18.5.14phivRouteTypeDECnet-iv