All MIBs › DECnet-iv › phivRouteMaxHops
phivRouteMaxHops
Module: DECnet-iv
OID (symbolic): DECnet-iv::phivRouteMaxHops
OID (numeric): 1.3.6.1.2.1.18.5.10
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This value represents the maximum number of routing hops allowable from the executor to any other reachable node within an area. (A hop is the logical distance over a circuit between two adjacent nodes.) This parameter defines the point where the executor node's Routing routing decision algorithm declares another node unreachable because the length of the shortest path between the two nodes is too long. For correct operation, this parameter must not be less than the network diameter. (The network diameter is the reachability distance between the two nodes of the network having the greatest reachability distance, where reachability distance is the length the shortest path between a given pair of nodes.)
What is phivRouteMaxHops?
Configures the hop-count ceiling beyond which Routing declares a destination node unreachable, where a hop is the logical distance across one circuit between adjacent nodes. Must be set no lower than the network's actual diameter (the longest shortest-path distance between any two nodes), or some genuinely reachable nodes will be treated as unreachable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.5.10 snmpwalk -v2c -c public <target> DECnet-iv::phivRouteMaxHops
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.18.5.10.1 snmpget -v2c -c public <target> DECnet-iv::phivRouteMaxHops.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.18.5.10.1 i <value>
Start monitoring DEC/Compaq/HP VAX or Alpha system / DECnet-capable router (DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECnet-iv::phivRouteMaxHops OID value, configure state conditions and alerts, and monitor any DEC/Compaq/HP VAX or Alpha system / DECnet-capable router (DECnet Phase IV) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.18 | phiv | DECnet-iv |
| 1.3.6.1.2.1.18.5 | routing | DECnet-iv |
| 1.3.6.1.2.1.18.5.10 | phivRouteMaxHops | DECnet-iv |