DECnet-iv :: phivNonBroadcastController

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DECnet-iv › phivNonBroadcastController

phivNonBroadcastController

Module: DECnet-iv

OID (symbolic): DECnet-iv::phivNonBroadcastController

OID (numeric): 1.3.6.1.2.1.18.14.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This value represents the Physical Link hardware controller mode for the line device. The values for controller-mode are:

NORMAL For normal controller operating mode.

LOOPBACK For software controllable loopback of the controller. On those devices that can support this mode, it causes all transmitted messages to be looped back from within the controller itself. This is accomplished without any manual intervention other than the setting of this parameter value.

OTHER indicates function is not supported Note that these values are incremented by one compared to the standard DECnet values.

What is phivNonBroadcastController?

Reports this line's hardware controller mode: Normal for regular operation, Loopback for a software-triggered internal loopback where transmitted messages are looped back within the controller itself for testing, or Other if the function isn't supported. A technician sets or checks Loopback mode when isolating whether a link problem is in the cabling/remote end versus the local controller.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.14.1.1.2
snmpwalk -v2c -c public <target> DECnet-iv::phivNonBroadcastController

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.18.14.1.1.2.1
snmpget -v2c -c public <target> DECnet-iv::phivNonBroadcastController.1

Start monitoring DEC/Compaq/HP VAX or Alpha system / DECnet-capable router (DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECnet-iv::phivNonBroadcastController OID value, configure state conditions and alerts, and monitor any DEC/Compaq/HP VAX or Alpha system / DECnet-capable router (DECnet Phase IV) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.18phivDECnet-iv
1.3.6.1.2.1.18.14nonBroadcastLineDECnet-iv
1.3.6.1.2.1.18.14.1phivNonBroadcastTableDECnet-iv
1.3.6.1.2.1.18.14.1.1phivNonBroadcastEntryDECnet-iv
1.3.6.1.2.1.18.14.1.1.2phivNonBroadcastControllerDECnet-iv