DECNET-PHIV-MIB :: phivNonBroadcastClock

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › DECNET-PHIV-MIB › phivNonBroadcastClock

phivNonBroadcastClock

Module: DECNET-PHIV-MIB

OID (symbolic): DECNET-PHIV-MIB::phivNonBroadcastClock

OID (numeric): 1.3.6.1.2.1.18.14.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This value represents the Physical Link hardware clock mode for the line device. The values for clock-mode are: INTERNAL For software controllable loopback use of the clock. On those devices that can support this mode, it causes the device to supply a clock signal such that a transmitted messages can be looped back from outside the device. This may require manual intervention other than the setting of this parameter value. For example, the operator may have to connect a loopback plug in place of the normal line.

EXTERNAL For normal clock operating mode, where the clock signal is supplied externally to the controller. Note that these values are incremented by one compared to the standard DECnet values.

What is phivNonBroadcastClock?

Read-only clock mode of the line device: internal (software-loopback clocking, may need a manual loopback plug), external (normal operation with clock supplied externally), or other. Relevant when diagnosing why a serial line won't synchronize, since an internal/external clock mismatch between DTE and DCE prevents proper framing.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.14.1.1.4
snmpwalk -v2c -c public <target> DECNET-PHIV-MIB::phivNonBroadcastClock

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.18.14.1.1.4.1
snmpget -v2c -c public <target> DECNET-PHIV-MIB::phivNonBroadcastClock.1

Start monitoring Legacy DEC systems/routers (DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECNET-PHIV-MIB::phivNonBroadcastClock OID value, configure state conditions and alerts, and monitor any Legacy DEC systems/routers (DECnet Phase IV) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAPERTUS-NPG-MIB
1.3.6.1.2.1mib_2AXON-MIB
1.3.6.1.2.1.18phivDECnet-iv
1.3.6.1.2.1.18.14nonBroadcastLineDECnet-iv
1.3.6.1.2.1.18.14.1phivNonBroadcastTableDECnet-iv
1.3.6.1.2.1.18.14.1.1phivNonBroadcastEntryDECnet-iv
Numeric OIDNameModule
1.3.6.1.2.1.18.14.1.1.4phivNonBroadcastClockDECNET-PHIV-MIB