All MIBs › DECNET-PHIV-MIB › phivAreaMaxCost
phivAreaMaxCost
Module: DECNET-PHIV-MIB
OID (symbolic): DECNET-PHIV-MIB::phivAreaMaxCost
OID (numeric): 1.3.6.1.2.1.18.15.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This value represents the maximum total path cost allowed from the executor to any other level 2 routing node. The AREA MAXIMUM COST number is decimal in the range 1-1022. This parameter is only applicable if the executor node is of type AREA.
What is phivAreaMaxCost?
Sets the maximum total path cost allowed from the executor to any other Level 2 routing node; applicable only if this node is configured as an AREA-type router. Like its Level 1 counterpart phivRouteMaxCost, it must be set at least as large as the actual inter-area network's maximum path cost.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.18.15.2 snmpwalk -v2c -c public <target> DECNET-PHIV-MIB::phivAreaMaxCost
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.18.15.2.1 snmpget -v2c -c public <target> DECNET-PHIV-MIB::phivAreaMaxCost.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.18.15.2.1 i <value>
Start monitoring Legacy DEC systems/routers (DECnet Phase IV) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DECNET-PHIV-MIB::phivAreaMaxCost OID value, configure state conditions and alerts, and monitor any Legacy DEC systems/routers (DECnet Phase IV) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.18 | phiv | DECnet-iv |
| 1.3.6.1.2.1.18.15 | area | DECnet-iv |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.18.15.2 | phivAreaMaxCost | DECNET-PHIV-MIB |