All MIBs › DATALINK-MIB › sensorAlarmThreshold
sensorAlarmThreshold
Module: DATALINK-MIB
OID (symbolic): DATALINK-MIB::sensorAlarmThreshold
OID (numeric): 1.3.6.1.4.1.3052.1.10.2.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: threshold for this alarm
What is sensorAlarmThreshold?
Count the sensor alarm counter must reach before the alarm actions run. Use a value above 1 to ignore brief contact bounces.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.1.10.2.1.6 snmpwalk -v2c -c public <target> DATALINK-MIB::sensorAlarmThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.1.10.2.1.6.1 snmpget -v2c -c public <target> DATALINK-MIB::sensorAlarmThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.1.10.2.1.6.1 i <value>
Start monitoring Serial/dial-up modem bank or remote-access router (vendor unclear) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DATALINK-MIB::sensorAlarmThreshold OID value, configure state conditions and alerts, and monitor any Serial/dial-up modem bank or remote-access router (vendor unclear) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.1 | datalink | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10 | alarms | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10.2 | sensorAlarmTable | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10.2.1 | sensorAlarmEntry | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10.2.1.6 | sensorAlarmThreshold | DATALINK-MIB |