DATALINK-MIB DEFINITIONS ::= BEGIN IMPORTS private, internet, mgmt, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1065-SMI ObjectName, enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM SNMPv2-TC TRAP-TYPE FROM RFC-1215 ; asentria OBJECT IDENTIFIER ::= { enterprises 3052 } --1.3.6.1.4.1.3052 datalink OBJECT IDENTIFIER ::= { asentria 1 } --1.3.6.1.4.1.3052.1 productIds OBJECT IDENTIFIER ::= { datalink 1 } --1.3.6.1.4.1.3052.1.1 productConfig OBJECT IDENTIFIER ::= { datalink 2 } --1.3.6.1.4.1.3052.1.2 unitIds OBJECT IDENTIFIER ::= { datalink 3 } --1.3.6.1.4.1.3052.1.3 serialPorts OBJECT IDENTIFIER ::= { datalink 4 } --1.3.6.1.4.1.3052.1.4 time OBJECT IDENTIFIER ::= { datalink 5 } --1.3.6.1.4.1.3052.1.5 snmpsetup OBJECT IDENTIFIER ::= { datalink 6 } --1.3.6.1.4.1.3052.1.6 passwords OBJECT IDENTIFIER ::= { datalink 7 } --1.3.6.1.4.1.3052.1.7 ftpsetup OBJECT IDENTIFIER ::= { datalink 8 } --1.3.6.1.4.1.3052.1.8 databases OBJECT IDENTIFIER ::= { datalink 9 } --1.3.6.1.4.1.3052.1.9 alarms OBJECT IDENTIFIER ::= { datalink 10 } --1.3.6.1.4.1.3052.1.10 actions OBJECT IDENTIFIER ::= { datalink 11 } --1.3.6.1.4.1.3052.1.11 controls OBJECT IDENTIFIER ::= { datalink 12 } --1.3.6.1.4.1.3052.1.12 alarmhistory OBJECT IDENTIFIER ::= { datalink 13 } --1.3.6.1.4.1.3052.1.13 realtimesocket OBJECT IDENTIFIER ::= { datalink 14 } --1.3.6.1.4.1.3052.1.14 iprestrictions OBJECT IDENTIFIER ::= { datalink 15 } --1.3.6.1.4.1.3052.1.15 ipsetup OBJECT IDENTIFIER ::= { datalink 16 } --1.3.6.1.4.1.3052.1.16 pppsetup OBJECT IDENTIFIER ::= { datalink 17 } --1.3.6.1.4.1.3052.1.17 ccode OBJECT IDENTIFIER ::= { datalink 18 } --1.3.6.1.4.1.3052.1.18 techsupport OBJECT IDENTIFIER ::= { datalink 99 } --1.3.6.1.4.1.3052.1.99 hardware OBJECT IDENTIFIER ::= { productConfig 4 } --1.3.6.1.4.1.3052.1.2.4 factorysetup OBJECT IDENTIFIER ::= { productConfig 5 } --1.3.6.1.4.1.3052.1.2.5 commandPassword OBJECT IDENTIFIER ::= { passwords 5 } --1.3.6.1.4.1.3052.1.7.5 entireDatabase OBJECT IDENTIFIER ::= { databases 1 } --1.3.6.1.4.1.3052.1.9.1 databaseStatus OBJECT IDENTIFIER ::= { entireDatabase 1 } --1.3.6.1.4.1.3052.1.9.1.1 databaseFiles OBJECT IDENTIFIER ::= { databases 2 } --1.3.6.1.4.1.3052.1.9.2 filesetup OBJECT IDENTIFIER ::= { databaseFiles 1 } --1.3.6.1.4.1.3052.1.9.2.1 nodataAlarms OBJECT IDENTIFIER ::= { alarms 3 } --1.3.6.1.4.1.3052.1.10.3 nodataAlarmHolidays OBJECT IDENTIFIER ::= { nodataAlarms 3 } --1.3.6.1.4.1.3052.1.10.3.3 actionsBuzzer OBJECT IDENTIFIER ::= { actions 1 } --1.3.6.1.4.1.3052.1.11.1 actionsTraps OBJECT IDENTIFIER ::= { actions 5 } --1.3.6.1.4.1.3052.1.11.5 opSettings OBJECT IDENTIFIER ::= { controls 1 } --1.3.6.1.4.1.3052.1.12.1 auxportMode OBJECT IDENTIFIER ::= { opSettings 6 } --1.3.6.1.4.1.3052.1.12.1.6 inlineHskMode OBJECT IDENTIFIER ::= { auxportMode 4 } --1.3.6.1.4.1.3052.1.12.1.6.4 modemSettings OBJECT IDENTIFIER ::= { controls 2 } --1.3.6.1.4.1.3052.1.12.2 dataRelease OBJECT IDENTIFIER ::= { controls 3 } --1.3.6.1.4.1.3052.1.12.3 otherControls OBJECT IDENTIFIER ::= { controls 4 } --1.3.6.1.4.1.3052.1.12.4 ftpPush OBJECT IDENTIFIER ::= { ftpsetup 3 } --1.3.6.1.4.1.3052.1.8.3 actionQueue OBJECT IDENTIFIER ::= { alarmhistory 1 } --1.3.6.1.4.1.3052.1.13.1 actionHistory OBJECT IDENTIFIER ::= { alarmhistory 2 } --1.3.6.1.4.1.3052.1.13.2 ipCurrent OBJECT IDENTIFIER ::= { ipsetup 1 } --1.3.6.1.4.1.3052.1.16.1 ipNew OBJECT IDENTIFIER ::= { ipsetup 2 } --1.3.6.1.4.1.3052.1.16.2 pppIdentification OBJECT IDENTIFIER ::= { pppsetup 1 } --1.3.6.1.4.1.3052.1.17.1 datalinkThisProduct OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This is a factory-configured string for the product name" ::= { productIds 1 } --1.3.6.1.4.1.3052.1.1.1 productname OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A second string which may also contain name/version info" ::= { productConfig 1 } --1.3.6.1.4.1.3052.1.2.1 systemversion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "system rom version number" ::= { productConfig 2 } --1.3.6.1.4.1.3052.1.2.2 appversion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "application version" ::= { productConfig 3 } --1.3.6.1.4.1.3052.1.2.3 numberports OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of RS232 ports found" ::= { hardware 1 } --1.3.6.1.4.1.3052.1.2.4.1 netcard OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0 if no net card, 1 if net card found" ::= { hardware 2 } --1.3.6.1.4.1.3052.1.2.4.2 modems OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0 if no modem, 1 if modem was found" ::= { hardware 3 } --1.3.6.1.4.1.3052.1.2.4.3 networkenabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0 if not enabled, 1 if enabled" ::= { hardware 4 } --1.3.6.1.4.1.3052.1.2.4.4 memorysize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "memory size in K" ::= { hardware 5 } --1.3.6.1.4.1.3052.1.2.4.5 modemreport OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "5-char string, speed to report for modem speed" ::= { factorysetup 1 } --1.3.6.1.4.1.3052.1.2.5.1 modemportspeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "modem port baud rate 38400, 19200, etc. " ::= { factorysetup 2 } --1.3.6.1.4.1.3052.1.2.5.2 modemsetupstring OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "modem setup string, e.g., ATe0v0s0=1" ::= { factorysetup 3 } --1.3.6.1.4.1.3052.1.2.5.3 modemcddelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "seconds after CD before sending answer string" ::= { factorysetup 4 } --1.3.6.1.4.1.3052.1.2.5.4 modemtype OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "number factory-assigned to this particular modem, manufacturer, etc." ::= { factorysetup 5 } --1.3.6.1.4.1.3052.1.2.5.5 serialnumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "up to 10 chars for factory-assigned serial number" ::= { factorysetup 6 } --1.3.6.1.4.1.3052.1.2.5.6 dateofmanufacture OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "up to 8 chars for factory-assigned date of manufacture" ::= { factorysetup 7 } --1.3.6.1.4.1.3052.1.2.5.7 databasemode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "database compatibility mode, 1 -normal, 2 commandset2, etc." ::= { productConfig 6 } --1.3.6.1.4.1.3052.1.2.6 datalinkSiteId OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Site ID string" ::= { unitIds 1 } --1.3.6.1.4.1.3052.1.3.1 idByPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SiteByPort ACCESS not-accessible STATUS mandatory DESCRIPTION "an id for type of data by port" ::= { unitIds 2 } --1.3.6.1.4.1.3052.1.3.2 sitebyport OBJECT-TYPE SYNTAX SiteByPort ACCESS not-accessible STATUS mandatory DESCRIPTION "entry for table" INDEX { siteindex } ::= { idByPortTable 1 } --1.3.6.1.4.1.3052.1.3.2.1 siteindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index for which port" ::= { sitebyport 1 } --1.3.6.1.4.1.3052.1.3.2.1.1 siteID OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "site id or type of data by port" ::= { sitebyport 2 } --1.3.6.1.4.1.3052.1.3.2.1.2 numberPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of RS232 ports found. " ::= { serialPorts 1 } --1.3.6.1.4.1.3052.1.4.1 portSetupTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSetup ACCESS not-accessible STATUS mandatory DESCRIPTION "port setup table, serial params, collect data, etc." ::= { serialPorts 2 } --1.3.6.1.4.1.3052.1.4.2 portSetupEntry OBJECT-TYPE SYNTAX PortSetup ACCESS not-accessible STATUS mandatory DESCRIPTION "port setup table, serial params, collect data, etc." INDEX { portIndex } ::= { portSetupTable 1 } --1.3.6.1.4.1.3052.1.4.2.1 portIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index for table" ::= { portSetupEntry 1 } --1.3.6.1.4.1.3052.1.4.2.1.1 portBaud OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "baud rate, 19200, 9600, etc." ::= { portSetupEntry 2 } --1.3.6.1.4.1.3052.1.4.2.1.2 portWord OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "word length, must be 7 or 8" ::= { portSetupEntry 3 } --1.3.6.1.4.1.3052.1.4.2.1.3 portParity OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "a single-char string with values of N E or O" ::= { portSetupEntry 4 } --1.3.6.1.4.1.3052.1.4.2.1.4 portStopbits OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "number of stop bits, must be 1" ::= { portSetupEntry 5 } --1.3.6.1.4.1.3052.1.4.2.1.5 portDataStore OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 data is not stored, 1 data is stored from this port" ::= { portSetupEntry 6 } --1.3.6.1.4.1.3052.1.4.2.1.6 portBinaryMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 data is ASCII, 1 data is binary" ::= { portSetupEntry 7 } --1.3.6.1.4.1.3052.1.4.2.1.7 portWrapMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 oldest data not overwritten, 1 older data is overwritten" ::= { portSetupEntry 8 } --1.3.6.1.4.1.3052.1.4.2.1.8 portHskMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "HSK mode to use when buffer close to full, 0 none, 1 xon, 2 DTR, 3 DTR and Xon" ::= { portSetupEntry 9 } --1.3.6.1.4.1.3052.1.4.2.1.9 portDateTimeStampMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Date/time stamp mode to use,bit mapped bit 0 - do date stamp bit 1 - include year bit 2 - include year 19xx or 20xx bit 3 - include day of week bit 4 - space after date bit 5 - include time bit 6 - include seconds bit 7 - space after time" ::= { portSetupEntry 10 } --1.3.6.1.4.1.3052.1.4.2.1.10 portPTMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "pass-through access mode. 0=none, 1=by modem, 2=by network any write kills the passthrough connection. any write requires private community name" ::= { portSetupEntry 11 } --1.3.6.1.4.1.3052.1.4.2.1.11 portPTTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "pass-through access mode time of this connection, in seconds" ::= { portSetupEntry 12 } --1.3.6.1.4.1.3052.1.4.2.1.12 portStoreFile OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "selects which data file data from this port is stored into" ::= { portSetupEntry 13 } --1.3.6.1.4.1.3052.1.4.2.1.13 portPtStripOutputLfs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 no/yes in pass-through, strip LFs going to device on this port" ::= { portSetupEntry 14 } --1.3.6.1.4.1.3052.1.4.2.1.14 portPtStripInputLfs OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 no/yes in pass-through, strip LFs coming from device on this port" ::= { portSetupEntry 15 } --1.3.6.1.4.1.3052.1.4.2.1.15 portlowDTR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 no/yes set DTR low and only raise it on SysAdmin & bypass connections" ::= { portSetupEntry 16 } --1.3.6.1.4.1.3052.1.4.2.1.16 currenttime OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Text string for date and time: SUN 01/02/98 12:34:27" ::= { time 1 } --1.3.6.1.4.1.3052.1.5.1 autoDstAdjust OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 no adjust, 1 adjust" ::= { time 2 } --1.3.6.1.4.1.3052.1.5.2 snmpTrapsEnabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 do not send any traps, 1 do send traps" ::= { snmpsetup 1 } --1.3.6.1.4.1.3052.1.6.1 snmpManagerTable OBJECT-TYPE SYNTAX SEQUENCE OF SnmpManager ACCESS not-accessible STATUS mandatory DESCRIPTION "management station names and addresses" ::= { snmpsetup 2 } --1.3.6.1.4.1.3052.1.6.2 snmpTableEntry OBJECT-TYPE SYNTAX SnmpManager ACCESS not-accessible STATUS mandatory DESCRIPTION "entry for snmp table" INDEX { snmpMgrIndex } ::= { snmpManagerTable 1 } --1.3.6.1.4.1.3052.1.6.2.1 snmpMgrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index for table" ::= { snmpTableEntry 1 } --1.3.6.1.4.1.3052.1.6.2.1.1 snmpManagerIp OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "the ip address of a manager" ::= { snmpTableEntry 2 } --1.3.6.1.4.1.3052.1.6.2.1.2 snmpManagerName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "the name of a manager, up to 80 chars" ::= { snmpTableEntry 3 } --1.3.6.1.4.1.3052.1.6.2.1.3 snmpTrapsAutoRepeatTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 do not repeat, else number of minutes to repeat" ::= { snmpsetup 3 } --1.3.6.1.4.1.3052.1.6.3 snmpSendTestTrap OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 on read, any Set sends test trap to all managers in table" ::= { snmpsetup 4 } --1.3.6.1.4.1.3052.1.6.4 -- password items are read-only, except prompt control modemPasswords OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 no modem passwords required, 1 modem passwords are required write requires private community name" ::= { passwords 1 } --1.3.6.1.4.1.3052.1.7.1 tcpPasswords OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 no telnet/tcp passwords required, 1 passwords are required write requires private community name" ::= { passwords 2 } --1.3.6.1.4.1.3052.1.7.2 ftpPasswords OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 no ftp passwords required, 1 passwords are required write requires private community name" ::= { passwords 3 } --1.3.6.1.4.1.3052.1.7.3 promptPasswords OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 no Password: prompt, 1 -> show Password: prompt" ::= { passwords 4 } --1.3.6.1.4.1.3052.1.7.4 commandNeedsPassword OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 not needed, 1 is needed write requires private community name" ::= { commandPassword 1 } --1.3.6.1.4.1.3052.1.7.5.1 commandPasswordTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1-99, number of minutes of no activity which auto logs user out" ::= { commandPassword 2 } --1.3.6.1.4.1.3052.1.7.5.2 passwordTable OBJECT-TYPE SYNTAX SEQUENCE OF PasswordTable ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of password entries, r-w only with private comm. name" ::= { passwords 6 } --1.3.6.1.4.1.3052.1.7.6 passwordTableEntry OBJECT-TYPE SYNTAX PasswordTable ACCESS not-accessible STATUS mandatory DESCRIPTION "entry to password table" INDEX { passwordIndex } ::= { passwordTable 1 } --1.3.6.1.4.1.3052.1.7.6.1 passwordIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index to password table" ::= { passwordTableEntry 1 } -- 1.3.6.1.4.1.3052.1.7.6.1.1 passwordCommand OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "password for command access" ::= { passwordTableEntry 2 } -- 1.3.6.1.4.1.3052.1.7.6.1.2 passwordAccess OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "password for pass-through access" ::= { passwordTableEntry 3 } -- 1.3.6.1.4.1.3052.1.7.6.1.3 ftpAutoDelete OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 files not autodeleted, 1 deleted on reading" ::= { ftpsetup 1 } --1.3.6.1.4.1.3052.1.8.1 ftpDataMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 normal, 1 compression mode 1, etc." ::= { ftpsetup 2 } --1.3.6.1.4.1.3052.1.8.2 ftpPushEnabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-no, 1-yes, enables ftp data push" ::= { ftpPush 1 } --1.3.6.1.4.1.3052.1.8.3.1 ftpPushTiming OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "how often data is pushed, 2-255 minutes" ::= { ftpPush 2 } --1.3.6.1.4.1.3052.1.8.3.2 ftpPushTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "timer which counts to ftpPushTiming" ::= { ftpPush 3 } --1.3.6.1.4.1.3052.1.8.3.3 ftpPushIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "ip address of ftp server to which we push the data" ::= { ftpPush 4 } --1.3.6.1.4.1.3052.1.8.3.4 ftpPushUser OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "text string to send for the user id" ::= { ftpPush 5 } --1.3.6.1.4.1.3052.1.8.3.5 ftpPushPass OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "text string to send for the ftp server password" ::= { ftpPush 6 } --1.3.6.1.4.1.3052.1.8.3.6 ftpPushAcct OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "text string to send for the account, if used" ::= { ftpPush 7 } --1.3.6.1.4.1.3052.1.8.3.7 ftpPushDir OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "text string to send for the directory we CWD to" ::= { ftpPush 8 } --1.3.6.1.4.1.3052.1.8.3.8 -- push table ftppushTable OBJECT-TYPE SYNTAX SEQUENCE OF FtpPushTable ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of ftp push enables" ::= { ftpPush 9 } --1.3.6.1.4.1.3052.1.8.3.9 ftppushTableEntry OBJECT-TYPE SYNTAX FtpPushTable ACCESS not-accessible STATUS mandatory DESCRIPTION "entry to ftp push table" INDEX { ftppushIndex } ::= { ftppushTable 1 } --1.3.6.1.4.1.3052.1.8.3.9.1 ftppushIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index to ftp push table" ::= { ftppushTableEntry 1 } --1.3.6.1.4.1.3052.1.8.3.9.1.1 ftppushEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "enable for ftp push, indexed by file" ::= { ftppushTableEntry 2 } --1.3.6.1.4.1.3052.1.8.3.9.1.2 ftpPushAlarms OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-no, 1-yes, do we push the ALARMS file" ::= { ftpPush 10 } --1.3.6.1.4.1.3052.1.8.3.10 ftpPushCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of ftp data pushes tried since reboot" ::= { ftpPush 11 } --1.3.6.1.4.1.3052.1.8.3.11 ftpPushStatusMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-none, 1-append, 2-replace, status file modes" ::= { ftpPush 12 } --1.3.6.1.4.1.3052.1.8.3.12 ftpPushServerName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Name of the FTP Push Targer Server" ::= { ftpPush 13 } --1.3.6.1.4.1.3052.1.8.3.13 databasePfull OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "percentage full of all database" ::= { databaseStatus 1 } --1.3.6.1.4.1.3052.1.9.1.1.1 databaseSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Size of Data Storage Area, in bytes" ::= { databaseStatus 2 } --1.3.6.1.4.1.3052.1.9.1.1.2 databaseRecordsAvailable OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Records which are available to read, total in all files" ::= { databaseStatus 3 } --1.3.6.1.4.1.3052.1.9.1.1.3 databaseRecordsDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Records which are deleted, total in all files" ::= { databaseStatus 4 } --1.3.6.1.4.1.3052.1.9.1.1.4 databaseAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF DatabaseAlarm ACCESS not-accessible STATUS mandatory DESCRIPTION "table for levels 1 2 3 of all database alarms and actions" ::= { entireDatabase 2 } --1.3.6.1.4.1.3052.1.9.1.2 databaseAlarmEntry OBJECT-TYPE SYNTAX DatabaseAlarm ACCESS not-accessible STATUS mandatory DESCRIPTION "entry for database alarm config and actions table" INDEX { databaseAlarmIndex } ::= { databaseAlarmTable 1 } --1.3.6.1.4.1.3052.1.9.1.2.1 databaseAlarmIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index for table, 1 2 or 3" ::= { databaseAlarmEntry 1 } --1.3.6.1.4.1.3052.1.9.1.2.1.1 databaseAlarmActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1, 1 = active" ::= { databaseAlarmEntry 2 } --1.3.6.1.4.1.3052.1.9.1.2.1.2 databaseAlarmThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1-99, percentage full threshold level" ::= { databaseAlarmEntry 3 } --1.3.6.1.4.1.3052.1.9.1.2.1.3 databaseAlarmBeeperActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 1 2, -> none, 1/10 or 10/10" ::= { databaseAlarmEntry 4 } --1.3.6.1.4.1.3052.1.9.1.2.1.4 databaseAlarmSerialActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which messages 1-8 are sent" ::= { databaseAlarmEntry 5 } --1.3.6.1.4.1.3052.1.9.1.2.1.5 databaseAlarmPagerActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which pagers 1-8 are used" ::= { databaseAlarmEntry 6 } --1.3.6.1.4.1.3052.1.9.1.2.1.6 databaseAlarmCalloutActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which modem callouts 1-8 are used" ::= { databaseAlarmEntry 7 } --1.3.6.1.4.1.3052.1.9.1.2.1.7 databaseAlarmTrapActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 for traps are sent or not" ::= { databaseAlarmEntry 8 } --1.3.6.1.4.1.3052.1.9.1.2.1.8 databaseAlarmFileStore OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-no, 1-yes, store alarms in the ALARMS file" ::= { entireDatabase 3 } --1.3.6.1.4.1.3052.1.9.1.3 databaseAlarmFileMaxSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "in K, max size for alarms file 4-32k" ::= { entireDatabase 4 } --1.3.6.1.4.1.3052.1.9.1.4 charmaskEnabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 char masking enabled" ::= { filesetup 1 } --1.3.6.1.4.1.3052.1.9.2.1.1 charmask OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "32-byte hex ascii for character masking" ::= { filesetup 2 } --1.3.6.1.4.1.3052.1.9.2.1.2 maxRecordChars OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "max characters in an ASCII record" ::= { filesetup 3 } --1.3.6.1.4.1.3052.1.9.2.1.3 binRecordBlocking OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# chars max to block binary records into" ::= { filesetup 4 } --1.3.6.1.4.1.3052.1.9.2.1.4 recordCollectionTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# seconds to allow before terminating a record automatically" ::= { filesetup 5 } --1.3.6.1.4.1.3052.1.9.2.1.5 fileTable OBJECT-TYPE SYNTAX SEQUENCE OF FileTable ACCESS not-accessible STATUS mandatory DESCRIPTION "table of directory entries" ::= { databaseFiles 2 } --1.3.6.1.4.1.3052.1.9.2.2 fileTableEntry OBJECT-TYPE SYNTAX FileTable ACCESS not-accessible STATUS mandatory DESCRIPTION "entry for table" INDEX { fileTableIndex } ::= { fileTable 1 } --1.3.6.1.4.1.3052.1.9.2.2.1 fileTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index for the table" ::= { fileTableEntry 1 } --1.3.6.1.4.1.3052.1.9.2.2.1.1 fileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "name of the file" ::= { fileTableEntry 2 } --1.3.6.1.4.1.3052.1.9.2.2.1.2 fileType OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "type of data, up to 24 chars" ::= { fileTableEntry 3 } --1.3.6.1.4.1.3052.1.9.2.2.1.3 fileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "file size in bytes" ::= { fileTableEntry 4 } --1.3.6.1.4.1.3052.1.9.2.2.1.4 fileRecords OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "file size in records" ::= { fileTableEntry 5 } --1.3.6.1.4.1.3052.1.9.2.2.1.5 fileRecordsAvailable OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# recs available" ::= { fileTableEntry 6 } --1.3.6.1.4.1.3052.1.9.2.2.1.6 fileRecordsDeleted OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# recs deleted" ::= { fileTableEntry 7 } --1.3.6.1.4.1.3052.1.9.2.2.1.7 filePercentNow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "% of all of memory this file is, right now" ::= { fileTableEntry 8 } --1.3.6.1.4.1.3052.1.9.2.2.1.8 fileAlarms OBJECT-TYPE SYNTAX SEQUENCE OF FileAlarm ACCESS not-accessible STATUS mandatory DESCRIPTION "file alarms, indexed by file and threshold" ::= { databaseFiles 3 } --1.3.6.1.4.1.3052.1.9.2.3 fileAlarmEntry OBJECT-TYPE SYNTAX FileAlarm ACCESS not-accessible STATUS mandatory DESCRIPTION "entry to the table" INDEX { fileAlarmFileIndex, fileAlarmThreshold } ::= { fileAlarms 1 } --1.3.6.1.4.1.3052.1.9.2.3.1 fileAlarmFileIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index for filenumber" ::= { fileAlarmEntry 1 } --1.3.6.1.4.1.3052.1.9.2.3.1.1 fileAlarmThresholdIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index for filenumber threshold" ::= { fileAlarmEntry 2 } --1.3.6.1.4.1.3052.1.9.2.3.1.2 fileAlarmActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 this file alarm active" ::= { fileAlarmEntry 3 } --1.3.6.1.4.1.3052.1.9.2.3.1.3 fileAlarmThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1-99, threshold level" ::= { fileAlarmEntry 4 } --1.3.6.1.4.1.3052.1.9.2.3.1.4 fileAlarmBeeperActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 1 2, none, 1/10 or 10/10" ::= { fileAlarmEntry 5 } --1.3.6.1.4.1.3052.1.9.2.3.1.5 fileAlarmSerialActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which messages 1-8 are sent" ::= { fileAlarmEntry 6 } --1.3.6.1.4.1.3052.1.9.2.3.1.6 fileAlarmPagerActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which pagers 1-8 are used" ::= { fileAlarmEntry 7 } --1.3.6.1.4.1.3052.1.9.2.3.1.7 fileAlarmCalloutActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which modem callouts 1-8 are used" ::= { fileAlarmEntry 8 } --1.3.6.1.4.1.3052.1.9.2.3.1.8 fileAlarmTrapActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 for traps are sent or not" ::= { fileAlarmEntry 9 } --1.3.6.1.4.1.3052.1.9.2.3.1.9 dataAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF DataAlarm ACCESS not-accessible STATUS mandatory DESCRIPTION "table of read-only items for data alarm setup" ::= { alarms 1 } --1.3.6.1.4.1.3052.1.10.1 dataAlarmEntry OBJECT-TYPE SYNTAX DataAlarm ACCESS not-accessible STATUS mandatory DESCRIPTION "Data alarm table entry" INDEX { dataAlarmIndex } ::= { dataAlarmTable 1 } --1.3.6.1.4.1.3052.1.10.1.1 dataAlarmIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index for data alarms" ::= { dataAlarmEntry 1 } --1.3.6.1.4.1.3052.1.10.1.1.1 dataAlarmActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0/1 active" ::= { dataAlarmEntry 2 } --1.3.6.1.4.1.3052.1.10.1.1.2 dataAlarmName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "name of alarm" ::= { dataAlarmEntry 3 } --1.3.6.1.4.1.3052.1.10.1.1.3 dataAlarmCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "counter for this alarm" ::= { dataAlarmEntry 4 } --1.3.6.1.4.1.3052.1.10.1.1.4 dataAlarmThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "threshold for this alarm" ::= { dataAlarmEntry 5 } --1.3.6.1.4.1.3052.1.10.1.1.5 dataAlarmClearMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "code for clearing mode" ::= { dataAlarmEntry 6 } --1.3.6.1.4.1.3052.1.10.1.1.6 dataAlarmClearTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "time of day, e.g., 01:20" ::= { dataAlarmEntry 7 } --1.3.6.1.4.1.3052.1.10.1.1.7 dataAlarmAcked OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 on read, any set to ack this alarm" ::= { dataAlarmEntry 8 } --1.3.6.1.4.1.3052.1.10.1.1.8 dataAlarmBeeperActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0 1 2, none, 1/10 or 10/10" ::= { dataAlarmEntry 9 } --1.3.6.1.4.1.3052.1.10.1.1.9 dataAlarmSerialActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "bits 0-7 show which messages 1-8 are sent" ::= { dataAlarmEntry 10 } --1.3.6.1.4.1.3052.1.10.1.1.10 dataAlarmPagerActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "bits 0-7 show which pagers 1-8 are used" ::= { dataAlarmEntry 11 } --1.3.6.1.4.1.3052.1.10.1.1.11 dataAlarmCalloutActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "bits 0-7 show which modem callouts 1-8 are used" ::= { dataAlarmEntry 12 } --1.3.6.1.4.1.3052.1.10.1.1.12 dataAlarmTrapActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0/1 for traps are sent or not" ::= { dataAlarmEntry 13 } --1.3.6.1.4.1.3052.1.10.1.1.13 dataAlarmString OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "last data alarm string for this alarm" ::= { dataAlarmEntry 14 } --1.3.6.1.4.1.3052.1.10.1.1.14 dataAlarmPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "port number for last data alarm string for this alarm" ::= { dataAlarmEntry 15 } --1.3.6.1.4.1.3052.1.10.1.1.15 dataAlarmAutoClear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0/1 disabled/enabled to auto clear counter when it reached threshold" ::= { dataAlarmEntry 16 } --1.3.6.1.4.1.3052.1.10.1.1.16 sensorAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF SensorAlarm ACCESS not-accessible STATUS mandatory DESCRIPTION "table of read-only items for sensor alarm setup" ::= { alarms 2 } --1.3.6.1.4.1.3052.1.10.2 sensorAlarmEntry OBJECT-TYPE SYNTAX SensorAlarm ACCESS not-accessible STATUS mandatory DESCRIPTION "sensor alarm table entry" INDEX { sensorAlarmIndex } ::= { sensorAlarmTable 1 } --1.3.6.1.4.1.3052.1.10.2.1 sensorAlarmIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index for sensor alarms" ::= { sensorAlarmEntry 1 } --1.3.6.1.4.1.3052.1.10.2.1.1 sensorAlarmActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 active" ::= { sensorAlarmEntry 2 } --1.3.6.1.4.1.3052.1.10.2.1.2 sensorAlarmName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "name of alarm" ::= { sensorAlarmEntry 3 } --1.3.6.1.4.1.3052.1.10.2.1.3 sensorAlarmMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 - open active, 1 - closed active" ::= { sensorAlarmEntry 4 } --1.3.6.1.4.1.3052.1.10.2.1.4 sensorAlarmCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "counter for this alarm" ::= { sensorAlarmEntry 5 } --1.3.6.1.4.1.3052.1.10.2.1.5 sensorAlarmThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "threshold for this alarm" ::= { sensorAlarmEntry 6 } --1.3.6.1.4.1.3052.1.10.2.1.6 sensorAlarmAcked OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 on read, any set to ack this alarm" ::= { sensorAlarmEntry 7 } --1.3.6.1.4.1.3052.1.10.2.1.7 sensorAlarmBeeperActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 1 2, none, 1/10 or 10/10" ::= { sensorAlarmEntry 8 } --1.3.6.1.4.1.3052.1.10.2.1.8 sensorAlarmSerialActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which messages 1-8 are sent" ::= { sensorAlarmEntry 9 } --1.3.6.1.4.1.3052.1.10.2.1.9 sensorAlarmPagerActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which pagers 1-8 are used" ::= { sensorAlarmEntry 10 } --1.3.6.1.4.1.3052.1.10.2.1.10 sensorAlarmCalloutActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which modem callouts 1-8 are used" ::= { sensorAlarmEntry 11 } --1.3.6.1.4.1.3052.1.10.2.1.11 sensorAlarmTrapActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 for traps are sent or not" ::= { sensorAlarmEntry 12 } --1.3.6.1.4.1.3052.1.10.2.1.12 sensorAlarmState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0-> open 1-> closed for current state" ::= { sensorAlarmEntry 13 } --1.3.6.1.4.1.3052.1.10.2.1.13 nodataAlarmStatus OBJECT-TYPE SYNTAX SEQUENCE OF NodataAlarmStatus ACCESS not-accessible STATUS mandatory DESCRIPTION "no data status table" ::= { nodataAlarms 1 } --1.3.6.1.4.1.3052.1.10.3.1 nodataAlarmStatusEntry OBJECT-TYPE SYNTAX NodataAlarmStatus ACCESS not-accessible STATUS mandatory DESCRIPTION "status table entry" INDEX { nodataAlarmStatusIndex } ::= { nodataAlarmStatus 1 } --1.3.6.1.4.1.3052.1.10.3.1.1 nodataAlarmStatusIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index for table" ::= { nodataAlarmStatusEntry 1 } --1.3.6.1.4.1.3052.1.10.3.1.1.1 nodataAlarmStatusCounter OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "the nodata counter" ::= { nodataAlarmStatusEntry 2 } --1.3.6.1.4.1.3052.1.10.3.1.1.2 nodataAlarmStatusAcked OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "reads as 0, any write acks this alarm" ::= { nodataAlarmStatusEntry 3 } --1.3.6.1.4.1.3052.1.10.3.1.1.3 nodataTable OBJECT-TYPE SYNTAX SEQUENCE OF NodataTable ACCESS not-accessible STATUS mandatory DESCRIPTION "nodata table" ::= { nodataAlarms 2 } --1.3.6.1.4.1.3052.1.10.3.2 nodataTableEntry OBJECT-TYPE SYNTAX NodataTable ACCESS not-accessible STATUS mandatory DESCRIPTION "nodata defn. table entry" INDEX { nodataTablePortIndex, nodataTableScheduleIndex, nodataTableLevelIndex } ::= { nodataTable 1 } --1.3.6.1.4.1.3052.1.10.3.2.1 nodataTablePortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "index by port" ::= { nodataTableEntry 1 } --1.3.6.1.4.1.3052.1.10.3.2.1.1 nodataTableScheduleIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "index by schedule" ::= { nodataTableEntry 2 } --1.3.6.1.4.1.3052.1.10.3.2.1.2 nodataTableLevelIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "index by level" ::= { nodataTableEntry 3 } --1.3.6.1.4.1.3052.1.10.3.2.1.3 nodataTableActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 , enabled or not" ::= { nodataTableEntry 4 } --1.3.6.1.4.1.3052.1.10.3.2.1.4 nodataTableSchedule OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "schedule, format is hh:mm-hh:mm" ::= { nodataTableEntry 5 } --1.3.6.1.4.1.3052.1.10.3.2.1.5 nodataTableThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "#minutes for no data for alarm" ::= { nodataTableEntry 6 } --1.3.6.1.4.1.3052.1.10.3.2.1.6 nodataTableBeeperActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 1 2, none, 1/10 or 10/10" ::= { nodataTableEntry 7 } --1.3.6.1.4.1.3052.1.10.3.2.1.7 nodataTableSerialActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which messages 1-8 are sent" ::= { nodataTableEntry 8 } --1.3.6.1.4.1.3052.1.10.3.2.1.8 nodataTablePagerActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which pagers 1-8 are used" ::= { nodataTableEntry 9 } --1.3.6.1.4.1.3052.1.10.3.2.1.9 nodataTableCalloutActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which modem callouts 1-8 are used" ::= { nodataTableEntry 10 } --1.3.6.1.4.1.3052.1.10.3.2.1.10 nodataTableTrapActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 for traps are sent or not" ::= { nodataTableEntry 11 } --1.3.6.1.4.1.3052.1.10.3.2.1.11 nodataNumberHolidays OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of nodata holidays defined" ::= { nodataAlarmHolidays 1 } --1.3.6.1.4.1.3052.1.10.3.3.1 nodataHolidayTable OBJECT-TYPE SYNTAX SEQUENCE OF NodataHoliday ACCESS not-accessible STATUS mandatory DESCRIPTION "holiday table" ::= { nodataAlarmHolidays 2 } --1.3.6.1.4.1.3052.1.10.3.3.2 nodataHolidayTableEntry OBJECT-TYPE SYNTAX NodataHoliday ACCESS not-accessible STATUS mandatory DESCRIPTION "holiday table entry" INDEX { nodataHolidayIndex } ::= { nodataHolidayTable 1 } --1.3.6.1.4.1.3052.1.10.3.3.2.1 nodataHolidayIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "index for holiday list" ::= { nodataHolidayTableEntry 1 } --1.3.6.1.4.1.3052.1.10.3.3.2.1.1 nodataHolidayItem OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "holiday list item, format is mm/dd" ::= { nodataHolidayTableEntry 2 } --1.3.6.1.4.1.3052.1.10.3.3.2.1.2 nodataHolidayAdd OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "null on read, set with holiday to add MM/DD" ::= { nodataAlarmHolidays 3 } --1.3.6.1.4.1.3052.1.10.3.3.3 nodataHolidayDelete OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "null on read, set with holiday to delete MM/DD" ::= { nodataAlarmHolidays 4 } --1.3.6.1.4.1.3052.1.10.3.3.4 nodataHolidayClear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "read returns 0, write requires private community name. used to clear the holiday list" ::= { nodataAlarmHolidays 5 } --1.3.6.1.4.1.3052.1.10.3.3.5 scheduleAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF ScheduleAlarm ACCESS not-accessible STATUS mandatory DESCRIPTION "scheduled alarm table" ::= { alarms 4 } --1.3.6.1.4.1.3052.1.10.4 scheduleAlarmEntry OBJECT-TYPE SYNTAX ScheduleAlarm ACCESS not-accessible STATUS mandatory DESCRIPTION "schedule table entry" INDEX { scheduleIndex } ::= { scheduleAlarmTable 1 } --1.3.6.1.4.1.3052.1.10.4.1 scheduleIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "day index" ::= { scheduleAlarmEntry 1 } --1.3.6.1.4.1.3052.1.10.4.1.1 scheduleActive OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "if active or not" ::= { scheduleAlarmEntry 2 } --1.3.6.1.4.1.3052.1.10.4.1.2 scheduleTime OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "time of day format is: hh:mm" ::= { scheduleAlarmEntry 3 } --1.3.6.1.4.1.3052.1.10.4.1.3 scheduleAcked OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "reads 0, any set acks alarm" ::= { scheduleAlarmEntry 4 } --1.3.6.1.4.1.3052.1.10.4.1.4 scheduleBeeperActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0 1 2, none, 1/10 or 10/10" ::= { scheduleAlarmEntry 5 } --1.3.6.1.4.1.3052.1.10.4.1.5 scheduleSerialActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which messages 1-8 are sent" ::= { scheduleAlarmEntry 6 } --1.3.6.1.4.1.3052.1.10.4.1.6 schedulePagerActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which pagers 1-8 are used" ::= { scheduleAlarmEntry 7 } --1.3.6.1.4.1.3052.1.10.4.1.7 scheduleCalloutActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "bits 0-7 show which modem callouts 1-8 are used" ::= { scheduleAlarmEntry 8 } --1.3.6.1.4.1.3052.1.10.4.1.8 scheduleTrapActions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 for traps are sent or not" ::= { scheduleAlarmEntry 9 } --1.3.6.1.4.1.3052.1.10.4.1.9 actionsBuzzerState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "current buzzer state 0.1.2" ::= { actionsBuzzer 1 } --1.3.6.1.4.1.3052.1.11.1.1 actionsSerialTable OBJECT-TYPE SYNTAX SEQUENCE OF SerialTable ACCESS not-accessible STATUS mandatory DESCRIPTION "serial message table" ::= { actions 2 } --1.3.6.1.4.1.3052.1.11.2 actionsSerialTableEntry OBJECT-TYPE SYNTAX SerialTable ACCESS not-accessible STATUS mandatory DESCRIPTION "serial table entry" INDEX { serialTableIndex } ::= { actionsSerialTable 1 } --1.3.6.1.4.1.3052.1.11.2.1 serialTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "serial table index" ::= { actionsSerialTableEntry 1 } --1.3.6.1.4.1.3052.1.11.2.1.1 serialTableMessage OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "serial table string" ::= { actionsSerialTableEntry 2 } --1.3.6.1.4.1.3052.1.11.2.1.2 actionsPagerTable OBJECT-TYPE SYNTAX SEQUENCE OF PagerTable ACCESS not-accessible STATUS mandatory DESCRIPTION "pager table" ::= { actions 3 } --1.3.6.1.4.1.3052.1.11.3 actionsPagerTableEntry OBJECT-TYPE SYNTAX PagerTable ACCESS not-accessible STATUS mandatory DESCRIPTION "pager table entry" INDEX { pagerTableIndex } ::= { actionsPagerTable 1 } --1.3.6.1.4.1.3052.1.11.3.1 pagerTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table index" ::= { actionsPagerTableEntry 1 } --1.3.6.1.4.1.3052.1.11.3.1.1 pagerType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-numeric, 1-alpha" ::= { actionsPagerTableEntry 2 } --1.3.6.1.4.1.3052.1.11.3.1.2 pagerPhonenumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "phone number to call for pager" ::= { actionsPagerTableEntry 3 } --1.3.6.1.4.1.3052.1.11.3.1.3 pagerID OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "ID or 2nd number to dial" ::= { actionsPagerTableEntry 4 } --1.3.6.1.4.1.3052.1.11.3.1.4 pagerDialDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# seconds on numeric to delay between dial and send pagerID or message" ::= { actionsPagerTableEntry 5 } --1.3.6.1.4.1.3052.1.11.3.1.5 pagerHangupDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# seconds on numeric to delay between messages and before hangup" ::= { actionsPagerTableEntry 6 } --1.3.6.1.4.1.3052.1.11.3.1.6 pagerMessage OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "message, either alpha or numeric" ::= { actionsPagerTableEntry 7 } --1.3.6.1.4.1.3052.1.11.3.1.7 pagerSendId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 send unit ID or not to pager" ::= { actionsPagerTableEntry 8 } --1.3.6.1.4.1.3052.1.11.3.1.8 pagerSendReason OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 send reason for page or not to pager" ::= { actionsPagerTableEntry 9 } --1.3.6.1.4.1.3052.1.11.3.1.9 pagerMaxAttempts OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "max tries to be successful" ::= { actionsPagerTableEntry 10 } --1.3.6.1.4.1.3052.1.11.3.1.10 pagerAttempts OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "current number of tries" ::= { actionsPagerTableEntry 11 } --1.3.6.1.4.1.3052.1.11.3.1.11 pagerAttemptDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# minutes between attempts" ::= { actionsPagerTableEntry 12 } --1.3.6.1.4.1.3052.1.11.3.1.12 pagerRepeat OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 do we repeat successful" ::= { actionsPagerTableEntry 13 } --1.3.6.1.4.1.3052.1.11.3.1.13 pagerRepeatDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# minutes between repeats, if used" ::= { actionsPagerTableEntry 14 } --1.3.6.1.4.1.3052.1.11.3.1.14 actionsCalloutTable OBJECT-TYPE SYNTAX SEQUENCE OF CalloutTable ACCESS not-accessible STATUS mandatory DESCRIPTION "callout table" ::= { actions 4 } --1.3.6.1.4.1.3052.1.11.4 actionsCalloutTableEntry OBJECT-TYPE SYNTAX CalloutTable ACCESS not-accessible STATUS mandatory DESCRIPTION "callout table entry" INDEX { calloutTableIndex } ::= { actionsCalloutTable 1 } --1.3.6.1.4.1.3052.1.11.4.1 calloutTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "table index" ::= { actionsCalloutTableEntry 1 } --1.3.6.1.4.1.3052.1.11.4.1.1 calloutPhonenumber OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "phone number to call for callout" ::= { actionsCalloutTableEntry 2 } --1.3.6.1.4.1.3052.1.11.4.1.2 calloutMaxConnecttime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# seconds to wait for carrier" ::= { actionsCalloutTableEntry 3 } --1.3.6.1.4.1.3052.1.11.4.1.3 calloutMessage OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "message to send" ::= { actionsCalloutTableEntry 4 } --1.3.6.1.4.1.3052.1.11.4.1.4 calloutSendId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 send unit ID or not to callout" ::= { actionsCalloutTableEntry 5 } --1.3.6.1.4.1.3052.1.11.4.1.5 calloutSendReason OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 send reason for page or not to callout" ::= { actionsCalloutTableEntry 6 } --1.3.6.1.4.1.3052.1.11.4.1.6 calloutCommandWait OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "#seconds to wait for a command on a callout before hangup" ::= { actionsCalloutTableEntry 7 } --1.3.6.1.4.1.3052.1.11.4.1.7 calloutMaxAttempts OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "max tries to be successful" ::= { actionsCalloutTableEntry 8 } --1.3.6.1.4.1.3052.1.11.4.1.8 calloutAttempts OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "current number of tries" ::= { actionsCalloutTableEntry 9 } --1.3.6.1.4.1.3052.1.11.4.1.9 calloutAttemptDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# minutes between attempts" ::= { actionsCalloutTableEntry 10 } --1.3.6.1.4.1.3052.1.11.4.1.10 calloutRepeat OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 do we repeat successful" ::= { actionsCalloutTableEntry 11 } --1.3.6.1.4.1.3052.1.11.4.1.11 calloutRepeatDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# minutes between repeats, if used" ::= { actionsCalloutTableEntry 12 } --1.3.6.1.4.1.3052.1.11.4.1.12 actionsTrapsEntSpecific OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 enterprise specific traps enabled" ::= { actionsTraps 1 } --1.3.6.1.4.1.3052.1.11.5.1 actionsTrapsEntSpecCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of enterprise specific traps sent since last re-boot" ::= { actionsTraps 2 } --1.3.6.1.4.1.3052.1.11.5.2 linefeeds OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 are linefeeds added to CRs on command responses?" ::= { opSettings 1 } --1.3.6.1.4.1.3052.1.12.1.1 duplex OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-half 1-full" ::= { opSettings 2 } --1.3.6.1.4.1.3052.1.12.1.2 response OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-codes 1-words" ::= { opSettings 3 } --1.3.6.1.4.1.3052.1.12.1.3 datafilterEnabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 off/on" ::= { opSettings 4 } --1.3.6.1.4.1.3052.1.12.1.4 alarmfilterEnabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 off/on" ::= { opSettings 5 } --1.3.6.1.4.1.3052.1.12.1.5 operatingMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1 command 2 input/access 3 unused 4 inline 5 extmodem" ::= { auxportMode 1 } --1.3.6.1.4.1.3052.1.12.1.6.1 inlineMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1,2,3 if inline, mode 1 (N->2) mode 2 (1->2, 3->4) mode 3 (1->2, 3->4, 5->6)" ::= { auxportMode 2 } --1.3.6.1.4.1.3052.1.12.1.6.2 inlineSource OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "if inline and inlineMode==1, source of I/O2 inline" ::= { auxportMode 3 } --1.3.6.1.4.1.3052.1.12.1.6.3 inlineHsk2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "handshake mode 0-3 for inline port I/O 2" ::= { inlineHskMode 1 } --1.3.6.1.4.1.3052.1.12.1.6.4.1 inlineHsk4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "handshake mode 0-3 for inline port I/O 4" ::= { inlineHskMode 2 } --1.3.6.1.4.1.3052.1.12.1.6.4.2 inlineHsk6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "handshake mode 0-3 for inline port I/O 6" ::= { inlineHskMode 3 } --1.3.6.1.4.1.3052.1.12.1.6.4.3 sureEnabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 off/on" ::= { opSettings 7 } --1.3.6.1.4.1.3052.1.12.1.7 commandTcpipTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-none, else number of no-activity minutes -> tcpip command to drop" ::= { opSettings 8 } --1.3.6.1.4.1.3052.1.12.1.8 sysadminTcpipTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-none, else number of no-activity minutes -> tcpip sysadmin to drop" ::= { opSettings 9 } --1.3.6.1.4.1.3052.1.12.1.9 bypassEndchar OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "ascii value for character to exit bypass mode. default ->27" ::= { opSettings 10 } --1.3.6.1.4.1.3052.1.12.1.10 routerAutoPing OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 = no/yes, default is 0, do we ping the default router every 10 minutes?" ::= { opSettings 11 } --1.3.6.1.4.1.3052.1.12.1.11 modemParity OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1 7E 2 7O 3 8N" ::= { modemSettings 1 } --1.3.6.1.4.1.3052.1.12.2.1 modemUserSetup OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "sent to modem on init before the factory setup string" ::= { modemSettings 2 } --1.3.6.1.4.1.3052.1.12.2.2 modemTapSetup OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "sent to modem on just before doing TAP (alpha pager) protocol" ::= { modemSettings 3 } --1.3.6.1.4.1.3052.1.12.2.3 modemAnswerString OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "sent when modem makes connection" ::= { modemSettings 4 } --1.3.6.1.4.1.3052.1.12.2.4 modemExtSetup OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "sent to ext. modem for setup string" ::= { modemSettings 5 } --1.3.6.1.4.1.3052.1.12.2.5 modemExtSetupTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# minutes of idle time between sending ext. modem setup string" ::= { modemSettings 6 } --1.3.6.1.4.1.3052.1.12.2.6 modemInactivityTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# minutes of no transmit which aborts a connection" ::= { modemSettings 7 } --1.3.6.1.4.1.3052.1.12.2.7 modemAutoexecString OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "command string which auto-executes after modem connection if no other command within 10 seconds" ::= { modemSettings 8 } --1.3.6.1.4.1.3052.1.12.2.8 modemAutoexecEnabled OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0/1 autoexec enabled" ::= { modemSettings 9 } --1.3.6.1.4.1.3052.1.12.2.9 modemTimeBetweenOutbound OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# seconds (minimum) between outbound call attempts" ::= { modemSettings 10 } --1.3.6.1.4.1.3052.1.12.2.10 releaseMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1-Line 3-CBB 4-Xmodem" ::= { dataRelease 1 } --1.3.6.1.4.1.3052.1.12.3.1 autodeleteEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1/2 off/on autodelete for CBB and Xmodem" ::= { dataRelease 2 } --1.3.6.1.4.1.3052.1.12.3.2 releaseCompressed OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1-compressed 2-decompressed" ::= { dataRelease 3 } --1.3.6.1.4.1.3052.1.12.3.3 waitMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1/2 off/on wait for 02 after 01 on rlmodes" ::= { otherControls 1 } --1.3.6.1.4.1.3052.1.12.4.1 tagMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1/2 off/on Line/Block tag enabled" ::= { otherControls 2 } --1.3.6.1.4.1.3052.1.12.4.2 crcMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1/2 off/on add CRC to ascii releases" ::= { otherControls 3 } --1.3.6.1.4.1.3052.1.12.4.3 dleMode OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1/2 off/on use DLE stuffing on CBB" ::= { otherControls 4 } --1.3.6.1.4.1.3052.1.12.4.4 cbbRetransmits OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# times a block retransmitted in CBB mode" ::= { otherControls 5 } --1.3.6.1.4.1.3052.1.12.4.5 cbbTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "# seconds to wait for an ack before retransmit in CBB mode" ::= { otherControls 6 } --1.3.6.1.4.1.3052.1.12.4.6 activeDatabase OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "selects a file. ports 2001-2006 auto select this variable" ::= { controls 5 } --1.3.6.1.4.1.3052.1.12.5 actionCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of active items in action table, 0-nn" ::= { actionQueue 1 } --1.3.6.1.4.1.3052.1.13.1.1 actionTable OBJECT-TYPE SYNTAX SEQUENCE OF ActionTable ACCESS not-accessible STATUS mandatory DESCRIPTION "action queue table" ::= { actionQueue 2 } --1.3.6.1.4.1.3052.1.13.1.2 actionTableEntry OBJECT-TYPE SYNTAX ActionTable ACCESS not-accessible STATUS mandatory DESCRIPTION "action queue entry" INDEX { actionTableIndex } ::= { actionTable 1 } --1.3.6.1.4.1.3052.1.13.1.2.1 actionTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "action table entry" ::= { actionTableEntry 1 } --1.3.6.1.4.1.3052.1.13.1.2.1.1 actionAcked OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "reads 0, any set removes (acks) this action" ::= { actionTableEntry 2 } --1.3.6.1.4.1.3052.1.13.1.2.1.2 actionReason OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "code reason for action" ::= { actionTableEntry 3 } --1.3.6.1.4.1.3052.1.13.1.2.1.3 actionReasonID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "which of the (reasons) e.g, alarm 3 vs. alarm 4" ::= { actionTableEntry 4 } --1.3.6.1.4.1.3052.1.13.1.2.1.4 actionReasonLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "which of the levels for alarms which have 1-3 levels" ::= { actionTableEntry 5 } --1.3.6.1.4.1.3052.1.13.1.2.1.5 actionType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "type of action being taken (page, callout, etc.)" ::= { actionTableEntry 6 } --1.3.6.1.4.1.3052.1.13.1.2.1.6 actionTypeID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "which of the actions e.g, pager 3 vs. pager 4" ::= { actionTableEntry 7 } --1.3.6.1.4.1.3052.1.13.1.2.1.7 actionRepeatTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "#minutes between repeats of attempts of this action" ::= { actionTableEntry 8 } --1.3.6.1.4.1.3052.1.13.1.2.1.8 actionAttempts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# of attempts to try this action so far" ::= { actionTableEntry 9 } --1.3.6.1.4.1.3052.1.13.1.2.1.9 actionNextAttempt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# minutes until the next attempt of this action" ::= { actionTableEntry 10 } --1.3.6.1.4.1.3052.1.13.1.2.1.10 actionTimeStamp OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "date and time string: 02/34 12:34, or text message if no items" ::= { actionTableEntry 11 } --1.3.6.1.4.1.3052.1.13.1.2.1.11 historyCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "number of history items in history table, 0-nn" ::= { actionHistory 1 } --1.3.6.1.4.1.3052.1.13.2.1 historyTable OBJECT-TYPE SYNTAX SEQUENCE OF HistoryTable ACCESS not-accessible STATUS mandatory DESCRIPTION "action history table" ::= { actionHistory 2 } --1.3.6.1.4.1.3052.1.13.2.2 historyTableEntry OBJECT-TYPE SYNTAX HistoryTable ACCESS not-accessible STATUS mandatory DESCRIPTION "history queue entry" INDEX { historyTableIndex } ::= { historyTable 1 } --1.3.6.1.4.1.3052.1.13.2.2.1 historyTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "history table entry" ::= { historyTableEntry 1 } --1.3.6.1.4.1.3052.1.13.2.2.1.1 historyEntryType OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "type of entry (e.g., modem fail, pager pass, etc.)" ::= { historyTableEntry 2 } --1.3.6.1.4.1.3052.1.13.2.2.1.2 historyReason OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "code reason for history" ::= { historyTableEntry 3 } --1.3.6.1.4.1.3052.1.13.2.2.1.3 historyReasonID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "which of the (reasons) e.g, alarm 3 vs. alarm 4" ::= { historyTableEntry 4 } --1.3.6.1.4.1.3052.1.13.2.2.1.4 historyReasonLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "which of the levels for alarms which have 1-3 levels" ::= { historyTableEntry 5 } --1.3.6.1.4.1.3052.1.13.2.2.1.5 historyType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "type of history being taken (page, callout, etc.)" ::= { historyTableEntry 6 } --1.3.6.1.4.1.3052.1.13.2.2.1.6 historyTypeID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "which of the historys e.g, pager 3 vs. pager 4" ::= { historyTableEntry 7 } --1.3.6.1.4.1.3052.1.13.2.2.1.7 historyTimeStamp OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "date and time string: 02/34 12:34, or text message if no items" ::= { historyTableEntry 8 } --1.3.6.1.4.1.3052.1.13.2.2.1.8 historyClearLog OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "reads 0, any set clears all history log items" ::= { historyTableEntry 9 } --1.3.6.1.4.1.3052.1.13.2.2.1.9 lastCalloutPageReason OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "the reason string for the last callout or page, or NONE if never used" ::= { alarmhistory 3 } --1.3.6.1.4.1.3052.1.13.3 rtsShowAnswer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "0-no 1-yes, show answer string on connection (deprecated)" ::= { realtimesocket 1 } --1.3.6.1.4.1.3052.1.14.1 rtsNeedPassword OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "0-no 1-yes, need password on RTS connection (deprecated)" ::= { realtimesocket 2 } --1.3.6.1.4.1.3052.1.14.2 rtsWaitXon OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "0-no 1-yes, wait for Xon after connection before sending data (deprecated)" ::= { realtimesocket 3 } --1.3.6.1.4.1.3052.1.14.3 rtsIdleTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "0-255, 0-none, 1-255 #idle minutes no data = shutdown socket (deprecated)" ::= { realtimesocket 4 } --1.3.6.1.4.1.3052.1.14.4 rtsEmptyClose OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "0->no, 1-> yes, when file empty close socket (polling, not rt data) (deprecated)" ::= { realtimesocket 5 } --1.3.6.1.4.1.3052.1.14.5 -- rts table -- revised in mib version 1.07 to configure all rts options on a per-port basis rtsTable OBJECT-TYPE SYNTAX SEQUENCE OF RtsTable ACCESS not-accessible STATUS mandatory DESCRIPTION "real time socket table" ::= { realtimesocket 6 } --1.3.6.1.4.1.3052.1.14.6 rtsTableEntry OBJECT-TYPE SYNTAX RtsTable ACCESS not-accessible STATUS mandatory DESCRIPTION "rts table entry" INDEX { rtsTableIndex } ::= { rtsTable 1 } --1.3.6.1.4.1.3052.1.14.6.1 rtsTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "rts table entry index" ::= { rtsTableEntry 1 } --1.3.6.1.4.1.3052.1.14.6.1.1 rtsNoStore OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-allow storage, 1-don't store data when RTS socket not connected" ::= { rtsTableEntry 2 } --1.3.6.1.4.1.3052.1.14.6.1.2 rtsDenied OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-don't allow, 1=yes allow this rts socket to connect" ::= { rtsTableEntry 3 } --1.3.6.1.4.1.3052.1.14.6.1.3 rtsSocketState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0-closed, 1-wait for pass, 2-wait for xon, 3=open for data" ::= { rtsTableEntry 4 } --1.3.6.1.4.1.3052.1.14.6.1.4 rtsPortShowAnswer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-no 1-yes, show answer string on connection" ::= { rtsTableEntry 5 } --1.3.6.1.4.1.3052.1.14.6.1.5 rtsPortNeedPassword OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0-no 1-yes, need password on RTS connection" ::= { rtsTableEntry 6 } --1.3.6.1.4.1.3052.1.14.6.1.6 rtsPortWaitXon OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-no 1-yes, wait for Xon after connection before sending data" ::= { rtsTableEntry 7 } --1.3.6.1.4.1.3052.1.14.6.1.7 rtsPortIdleTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0-255, 0-none, 1-255 #idle minutes no data = shutdown socket" ::= { rtsTableEntry 8 } --1.3.6.1.4.1.3052.1.14.6.1.8 rtsPortEmptyClose OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "0->no, 1-> yes, when file empty close socket (polling, not rt data)" ::= { rtsTableEntry 9 } --1.3.6.1.4.1.3052.1.14.6.1.9 iprestrictTable OBJECT-TYPE SYNTAX SEQUENCE OF IpRestrictTable ACCESS not-accessible STATUS mandatory DESCRIPTION "ip restrictions table" ::= { iprestrictions 1 } --1.3.6.1.4.1.3052.1.15.1 iprestrictTableEntry OBJECT-TYPE SYNTAX IpRestrictTable ACCESS not-accessible STATUS mandatory DESCRIPTION "ip restriction table entry" INDEX { iprestrictTableIndex } ::= { iprestrictTable 1 } --1.3.6.1.4.1.3052.1.15.1.1 iprestrictTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "ip restrict table entry index" ::= { iprestrictTableEntry 1 } --1.3.6.1.4.1.3052.1.15.1.1.1 iprestrictIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "an ip address which forces a restriction or allowance for an ip range" ::= { iprestrictTableEntry 2 } --1.3.6.1.4.1.3052.1.15.1.1.2 suspendIPRestrictions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "read returns 0, writing requires the private community name. default is 0 set to 1 to suspend IP restrictions while loading the list set back to 0 to allow the restrictions to be used." ::= { iprestrictions 2 } --1.3.6.1.4.1.3052.1.15.2 killIPRestrictions OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "read returns 0, writing requires the private community name. any set removes all entries from the IP restrcition list." ::= { iprestrictions 3 } --1.3.6.1.4.1.3052.1.15.3 addIPRestrictions OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "read returns 0, writing requires the private community name. any set adds an entry to the IP restriction list note that list is no re-sorted, so must add in order" ::= { iprestrictions 4 } --1.3.6.1.4.1.3052.1.15.4 ipCurrentStatic OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "1=static, 0=dynamic" ::= { ipCurrent 1 } --1.3.6.1.4.1.3052.1.16.1.1 ipCurrentAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "current IP address" ::= { ipCurrent 2 } --1.3.6.1.4.1.3052.1.16.1.2 ipCurrentSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "current subnet mask" ::= { ipCurrent 3 } --1.3.6.1.4.1.3052.1.16.1.3 ipCurrentDefaultRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "current default router" ::= { ipCurrent 4 } --1.3.6.1.4.1.3052.1.16.1.4 ipNewStatic OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "1=static, 0=dynamic. write requires private community name." ::= { ipNew 1 } --1.3.6.1.4.1.3052.1.16.2.1 ipNewAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "read=current new address, write requires private community name." ::= { ipNew 2 } --1.3.6.1.4.1.3052.1.16.2.2 ipNewSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "read=current new subnet mask, write requires private community name." ::= { ipNew 3 } --1.3.6.1.4.1.3052.1.16.2.3 ipNewDefaultRouter OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "read=current new default router, write requires private community name." ::= { ipNew 4 } --1.3.6.1.4.1.3052.1.16.2.4 ipNewSetup OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "read=0. write requires private community name. any write causes the current object values for ipNewStatic, ipNewAddress, ipNewSubnetMask and ipNewDefaultRouter to be used. Causes the unit to re-initialize its network stacks with these new values. Changes to ipNewStatic, ipNewAddress, ipNewSubnetMask and ipNewDefaultRouter do not affect the network stack until ipNewSetup is written with some value:" ::= { ipNew 5 } --1.3.6.1.4.1.3052.1.16.2.5 -- ppp setup pppIDString OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "sent in ppp up trap to provide host identification string" ::= { pppIdentification 1 } --1.3.6.1.4.1.3052.1.17.1.1 pppIPAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "sent in ppp up trap to provide host identification by IP address" ::= { pppIdentification 2 } --1.3.6.1.4.1.3052.1.17.1.2 -- ccode support ccodeLoaded OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0/1, no/yes, is ccode loaded" ::= { ccode 1 } --1.3.6.1.4.1.3052.1.18.1 ccodeRunning OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "0/1, no/yes, is ccode running" ::= { ccode 2 } --1.3.6.1.4.1.3052.1.18.2 ccodeStackMainWas OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# of bytes of stack used by main app, last time run" ::= { ccode 3 } --1.3.6.1.4.1.3052.1.18.3 ccodeStackMainNow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# of bytes of stack used by main app, this time run" ::= { ccode 4 } --1.3.6.1.4.1.3052.1.18.4 ccodeStackT2Was OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# of bytes of stack used by 2nd task of app, last time run" ::= { ccode 5 } --1.3.6.1.4.1.3052.1.18.5 ccodeStackT2Was2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "# of bytes of stack used by 2nd task of app, this time run" ::= { ccode 6 } --1.3.6.1.4.1.3052.1.18.6 -- tech support variables, for technical support use only techsupportInt1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "a debugging integer for technical support use only. Do not use" ::= { techsupport 1 } --1.3.6.1.4.1.3052.1.99.1 techsupportInt2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "a debugging integer for technical support use only. Do not use" ::= { techsupport 2 } --1.3.6.1.4.1.3052.1.99.2 techsupportInt3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "a debugging integer for technical support use only. Do not use" ::= { techsupport 3 } --1.3.6.1.4.1.3052.1.99.3 techsupportInt4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "a debugging integer for technical support use only. Do not use" ::= { techsupport 4 } --1.3.6.1.4.1.3052.1.99.4 techsupportInt5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "a debugging integer for technical support use only. Do not use" ::= { techsupport 5 } --1.3.6.1.4.1.3052.1.99.5 -- TRAP DEFINITIONS datalinkDbasePfullTrap TRAP-TYPE ENTERPRISE asentria VARIABLES { databaseAlarmIndex, databasePfull } DESCRIPTION "The datalinkDbasePfullTrap is issued when the database reaches a pre-determined threshold level, which causes a trap." ::= 501 datalinkFilePfullTrap TRAP-TYPE ENTERPRISE asentria VARIABLES { fileAlarmFileIndex, fileAlarmThresholdIndex, filePercentNow } DESCRIPTION "The datalinkFilePfullTrap is issued when one of the data files reaches a pre-determined threshold level, which causes a trap." ::= 502 datalinkDataAlarmTrap TRAP-TYPE ENTERPRISE asentria VARIABLES { dataAlarmIndex, dataAlarmName, dataAlarmString, dataAlarmPort } DESCRIPTION "The datalinkDataAlarmTrap is issued when one of the data alarms reaches a pre-determined threshold level, which causes a trap." ::= 503 datalinkSensorAlarmTrap TRAP-TYPE ENTERPRISE asentria VARIABLES { sensorAlarmIndex, sensorAlarmName, sensorAlarmState } DESCRIPTION "The datalinkSensorAlarmTrap is issued when one of the External Sensors is triggered for a pre-determined threshold amount of time, which causes a trap." ::= 504 datalinkNoDataAlarmTrap TRAP-TYPE ENTERPRISE asentria VARIABLES { nodataTablePortIndex, nodataTableScheduleIndex, nodataTableLevelIndex, nodataAlarmStatusCounter, nodataTableThreshold } DESCRIPTION "The datalinkNoDataAlarmTrap is issued when one of the ports receives no input data for a pre-determined threshold amount of time, which causes a trap." ::= 505 datalinkSchedTrap TRAP-TYPE ENTERPRISE asentria VARIABLES { scheduleIndex } DESCRIPTION "The datalinkSchedTrap is issued when a scheduled event causes a trap." ::= 506 datalinkImmediateTrap TRAP-TYPE ENTERPRISE asentria DESCRIPTION "The datalinkImmediateTrap is issued when the dotrap command is used to issue a test trap to all snmp managers" ::= 507 datalinkPPPupTrap TRAP-TYPE ENTERPRISE asentria VARIABLES { pppIDString, pppIPAddress } DESCRIPTION "The datalinkPPPupTrap is issued when the PPP interface is brought up and the ppp connection has been established" ::= 509 SiteByPort ::= SEQUENCE { siteindex INTEGER, siteID DisplayString } PortSetup ::= SEQUENCE { portIndex INTEGER, portBaud INTEGER, portWord INTEGER, portParity DisplayString, portStopbits INTEGER, portDataStore INTEGER, portBinaryMode INTEGER, portWrapMode INTEGER, portHskMode INTEGER, portDateTimeStampMode INTEGER, portPTMode INTEGER, portPTTime INTEGER, portStoreFile INTEGER, portPtStripOutputLfs INTEGER, portPtStripInputLfs INTEGER, portlowDTR INTEGER } SnmpManager ::= SEQUENCE { snmpMgrIndex INTEGER, snmpManagerIp IpAddress, snmpManagerName DisplayString } FtpPushTable ::= SEQUENCE { ftppushIndex INTEGER, ftppushEnable INTEGER } DatabaseAlarm ::= SEQUENCE { databaseAlarmIndex INTEGER, databaseAlarmActive INTEGER, databaseAlarmThreshold INTEGER, databaseAlarmBeeperActions INTEGER, databaseAlarmSerialActions INTEGER, databaseAlarmPagerActions INTEGER, databaseAlarmCalloutActions INTEGER, databaseAlarmTrapActions INTEGER } FileTable ::= SEQUENCE { fileTableIndex INTEGER, fileName DisplayString, fileType DisplayString, fileSize INTEGER, fileRecords INTEGER, fileRecordsAvailable INTEGER, fileRecordsDeleted INTEGER, filePercentNow INTEGER } FileAlarm ::= SEQUENCE { fileAlarmFileIndex INTEGER, fileAlarmThresholdIndex INTEGER, fileAlarmActive INTEGER, fileAlarmThreshold INTEGER, fileAlarmBeeperActions INTEGER, fileAlarmSerialActions INTEGER, fileAlarmPagerActions INTEGER, fileAlarmCalloutActions INTEGER, fileAlarmTrapActions INTEGER } DataAlarm ::= SEQUENCE { dataAlarmIndex INTEGER, dataAlarmActive INTEGER, dataAlarmName DisplayString, dataAlarmCounter INTEGER, dataAlarmThreshold INTEGER, dataAlarmClearMode INTEGER, dataAlarmClearTime DisplayString, dataAlarmAcked INTEGER, dataAlarmBeeperActions INTEGER, dataAlarmSerialActions INTEGER, dataAlarmPagerActions INTEGER, dataAlarmCalloutActions INTEGER, dataAlarmTrapActions INTEGER, dataAlarmString DisplayString, dataAlarmAutoClear INTEGER } SensorAlarm ::= SEQUENCE { sensorAlarmIndex INTEGER, sensorAlarmActive INTEGER, sensorAlarmName DisplayString, sensorAlarmMode INTEGER, sensorAlarmCounter INTEGER, sensorAlarmThreshold INTEGER, sensorAlarmAcked INTEGER, sensorAlarmBeeperActions INTEGER, sensorAlarmSerialActions INTEGER, sensorAlarmPagerActions INTEGER, sensorAlarmCalloutActions INTEGER, sensorAlarmTrapActions INTEGER, sensorAlarmState INTEGER } NodataAlarmStatus ::= SEQUENCE { nodataAlarmStatusIndex INTEGER, nodataAlarmStatusCounter INTEGER, nodataAlarmStatusAcked INTEGER } NodataTable ::= SEQUENCE { nodataTablePortIndex INTEGER, nodataTableScheduleIndex INTEGER, nodataTableLevelIndex INTEGER, nodataTableActive INTEGER, nodataTableSchedule DisplayString, nodataTableThreshold INTEGER, nodataTableBeeperActions INTEGER, nodataTableSerialActions INTEGER, nodataTablePagerActions INTEGER, nodataTableCalloutActions INTEGER, nodataTableTrapActions INTEGER } NodataHoliday ::= SEQUENCE { nodataHolidayIndex INTEGER, nodataHolidayItem DisplayString } ScheduleAlarm ::= SEQUENCE { scheduleIndex INTEGER, scheduleActive INTEGER, scheduleTime DisplayString, scheduleAcked INTEGER, scheduleBeeperActions INTEGER, scheduleSerialActions INTEGER, schedulePagerActions INTEGER, scheduleCalloutActions INTEGER, scheduleTrapActions INTEGER } SerialTable ::= SEQUENCE { serialTableIndex INTEGER, serialTableMessage DisplayString } PagerTable ::= SEQUENCE { pagerTableIndex INTEGER, pagerType INTEGER, pagerPhonenumber DisplayString, pagerID DisplayString, pagerDialDelay INTEGER, pagerHangupDelay INTEGER, pagerMessage DisplayString, pagerSendId INTEGER, pagerSendReason INTEGER, pagerMaxAttempts INTEGER, pagerAttempts INTEGER, pagerAttemptDelay INTEGER, pagerRepeat INTEGER, pagerRepeatDelay INTEGER } CalloutTable ::= SEQUENCE { calloutTableIndex INTEGER, calloutPhonenumber DisplayString, calloutMaxConnecttime INTEGER, calloutMessage DisplayString, calloutSendId INTEGER, calloutSendReason INTEGER, calloutCommandWait INTEGER, calloutMaxAttempts INTEGER, calloutAttempts INTEGER, calloutAttemptDelay INTEGER, calloutRepeat INTEGER, calloutRepeatDelay INTEGER } ActionTable ::= SEQUENCE { actionTableIndex INTEGER, actionAcked INTEGER, actionReason INTEGER, actionReasonID INTEGER, actionReasonLevel INTEGER, actionType INTEGER, actionTypeID INTEGER, actionRepeatTime INTEGER, actionAttempts INTEGER, actionNextAttempt INTEGER, actionTimeStamp DisplayString } HistoryTable ::= SEQUENCE { historyTableIndex INTEGER, historyEntryType INTEGER, historyReason INTEGER, historyReasonID INTEGER, historyReasonLevel INTEGER, historyType INTEGER, historyTypeID INTEGER, historyTimeStamp DisplayString, historyClearLog INTEGER } RtsTable ::= SEQUENCE { rtsTableIndex INTEGER, rtsNoStore INTEGER, rtsDenied INTEGER, rtsSocketState INTEGER, rtsPortShowAnswer INTEGER, rtsPortNeedPassword INTEGER, rtsPortWaitXon INTEGER, rtsPortIdleTimeout INTEGER, rtsPortEmptyClose INTEGER } IpRestrictTable ::= SEQUENCE { iprestrictTableIndex INTEGER, iprestrictIpAddress IpAddress } END