All MIBs › DATALINK-MIB › sensorAlarmMode
sensorAlarmMode
Module: DATALINK-MIB
OID (symbolic): DATALINK-MIB::sensorAlarmMode
OID (numeric): 1.3.6.1.4.1.3052.1.10.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0 - open active, 1 - closed active
What is sensorAlarmMode?
Defines which contact state counts as alarm: 0 means the alarm is active when the contact is open, 1 when it is closed. Match it to whether your sensor is normally-closed or normally-open.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.1.10.2.1.4 snmpwalk -v2c -c public <target> DATALINK-MIB::sensorAlarmMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.1.10.2.1.4.1 snmpget -v2c -c public <target> DATALINK-MIB::sensorAlarmMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.1.10.2.1.4.1 i <value>
Start monitoring Serial/dial-up modem bank or remote-access router (vendor unclear) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DATALINK-MIB::sensorAlarmMode OID value, configure state conditions and alerts, and monitor any Serial/dial-up modem bank or remote-access router (vendor unclear) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.1 | datalink | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10 | alarms | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10.2 | sensorAlarmTable | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10.2.1 | sensorAlarmEntry | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10.2.1.4 | sensorAlarmMode | DATALINK-MIB |