All MIBs › DATALINK-MIB › sensorAlarmBeeperActions
sensorAlarmBeeperActions
Module: DATALINK-MIB
OID (symbolic): DATALINK-MIB::sensorAlarmBeeperActions
OID (numeric): 1.3.6.1.4.1.3052.1.10.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: 0 1 2, none, 1/10 or 10/10
What is sensorAlarmBeeperActions?
Selects the beeper response when this sensor alarm fires: 0 none, 1 the 1/10 pattern, 2 the 10/10 pattern.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.1.10.2.1.8 snmpwalk -v2c -c public <target> DATALINK-MIB::sensorAlarmBeeperActions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.1.10.2.1.8.1 snmpget -v2c -c public <target> DATALINK-MIB::sensorAlarmBeeperActions.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.1.10.2.1.8.1 i <value>
Start monitoring Serial/dial-up modem bank or remote-access router (vendor unclear) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DATALINK-MIB::sensorAlarmBeeperActions OID value, configure state conditions and alerts, and monitor any Serial/dial-up modem bank or remote-access router (vendor unclear) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.1 | datalink | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10 | alarms | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10.2 | sensorAlarmTable | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10.2.1 | sensorAlarmEntry | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.10.2.1.8 | sensorAlarmBeeperActions | DATALINK-MIB |