All MIBs › DATALINK-MIB › modemUserSetup
modemUserSetup
Module: DATALINK-MIB
OID (symbolic): DATALINK-MIB::modemUserSetup
OID (numeric): 1.3.6.1.4.1.3052.1.12.2.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: sent to modem on init before the factory setup string
What is modemUserSetup?
An AT command string sent to the modem at initialization, before the factory setup string. Use it for site-specific modem tweaks without touching factory settings.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3052.1.12.2.2 snmpwalk -v2c -c public <target> DATALINK-MIB::modemUserSetup
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3052.1.12.2.2.1 snmpget -v2c -c public <target> DATALINK-MIB::modemUserSetup.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3052.1.12.2.2.1 s <value>
Start monitoring Serial/dial-up modem bank or remote-access router (vendor unclear) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DATALINK-MIB::modemUserSetup OID value, configure state conditions and alerts, and monitor any Serial/dial-up modem bank or remote-access router (vendor unclear) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3052 | asentria | ASENTRIA-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3052.1 | datalink | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.12 | controls | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.12.2 | modemSettings | DATALINK-MIB |
| 1.3.6.1.4.1.3052.1.12.2.2 | modemUserSetup | DATALINK-MIB |